Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Miami Homeowners Choose Delta Construction
We provide independent Delta construction service in Miami – repairing, replacing, and installing Delta faucets, Monitor shower valves, and In2ition heads in kitchens and baths across Miami-Dade. What makes our Delta work different is brand-specific diagnosis: we know the exact cartridges, diverters, and wear points Delta products use, so we fix the cause instead of swapping parts and hoping. We’re an independent service provider, not authorized, sponsored, or endorsed by Delta. Call (833) 968-1198 for a free estimate.

Delta shows up in a lot of Miami homes for a reason. The brand’s Monitor valves and Lahara, Windemere, Classic, and Foundations faucets were installed by the thousands through the 1990s and 2000s, which means plenty of Miami bathrooms are now working on original cartridges and diverters. That’s where we come in.
Why Trust Groundwork Construction Co. of Miami for Your Delta Construction?
Our technicians have up to 12 years of experience, and a good share of that time has been spent with Delta trim in hand – pulling Monitor 13/14 Series cartridges, reseating diverter spouts, and chasing drips on Lahara kitchen faucets in Miami condos and CBS homes alike. That familiarity matters because Delta failures are specific and repeatable. A temperature swing on a Monitor valve and a drip at the base of a Windemere faucet are different problems with different fixes, and treating them the same wastes your money.
We source genuine Delta OEM parts for anything that controls water temperature or flow, and quality aftermarket trim only where the part is cosmetic. That split keeps your service warranty-safe. We also document what we replace, which helps if a Delta warranty question ever comes up down the road.
Every job is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. Our technicians are background-checked and arrive in uniform, and calls are answered by a live person 24/7. Upfront pricing, no surprises: the number you see is the number you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Delta Construction Problems We Fix in Miami
- Monitor 13/14 Series cartridge wear (RP19804 / RP46074). The pressure-balance cartridge inside these valves wears out after years of Miami’s hard, mineral-heavy water. You’ll notice temperature drift, or a shower that swings scalding-to-cold the moment a nearby fixture runs. The cartridge is usually the culprit, not the water heater.
- Diverter spout failure on Monitor tub-and-shower systems. Water keeps running from the tub spout while the shower is on. The internal diverter gate or the spout’s diverter seat has worn, so flow splits instead of switching. Common in Miami homes where the original spout has been in service for two decades.
- Ceramic disc cartridge and inlet-seal wear on Lahara, Windemere, and Classic kitchen faucets. Drips at the spout or seepage at the base. The ceramic discs score, or the inlet O-rings flatten with age. Salt air and year-round humidity accelerate seal degradation in Miami.
- In2ition hand-shower docking and check-valve leaks. The two-in-one head won’t seat properly on its dock, or the check valve inside the wand drips. Hard-water scale is a big factor – it locks the head in place and prevents a clean dock seal.
- Corroded valve bodies in older walls. After 20-plus years, a Monitor valve body can pit and corrode internally. Replacement cartridges stop helping at that point, and the honest answer becomes a valve replacement or a tub-to-shower conversion.
Here’s a scenario we see constantly in Miami: a Delta Monitor shower that suddenly runs cold whenever the kitchen sink is used. It points to a worn pressure-balance cartridge or clogged inlet screens, not a water-heater problem. A qualified local pro pulls the trim, replaces the OEM cartridge and seats, flushes the valve body, and checks the diverter spout. If the valve body is pitted from years of hard water, the honest recommendation shifts toward a tub-to-shower conversion with new trim rather than another cartridge.
Delta Parts & Our Repair-vs-Replace Approach
Parts get sourced per job, then matched to what’s actually failing. For Monitor and In2ition valves we use genuine Delta OEM cartridges and diverters. Aftermarket clones are cheaper, but they commonly bring back the same temperature swing within a year – a bad trade in a shower you use every morning. Where the only issue is cosmetic trim, quality aftermarket is fine and we’ll say so.
The repair-versus-replace call is where a lot of Miami homeowners have been oversold. On an older Monitor valve, replacing the cartridge and seats is usually the right, economical move. A corroded or pitted valve body in a 20-year-old wall is different – repair costs climb and the fix doesn’t last. That’s the point to plan a conversion instead of repeating the same repair every 18 months.
We give you both numbers and the reasoning behind each, so the choice is yours. Call (833) 968-1198 for a free estimate on either path.

Our Delta Service Process – Step by Step
- 1
Diagnosis. We identify the exact Delta model – Monitor 13/14 Series, Lahara, Windemere, In2ition, Classic, Foundations – and confirm the failure point: cartridge, diverter, seats, inlet seals, or valve body.
- 2
Repair or install. We shut off supply, pull the trim, and install OEM Delta parts on any temperature or flow-critical component. New installations get the same brand-matched approach.
- 3
Test. We run hot and cold, check for temperature stability under a second fixture, verify the diverter switches cleanly, and confirm no drips at spout or base.
- 4
Document and back it. You get a record of the parts replaced, and the work is covered by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDelta Products We Service & Install in Miami
We work on Delta Monitor 13/14 Series tub-and-shower valves, the Lahara and Windemere faucet collections, In2ition two-in-one shower heads, and Classic and Foundations kitchen faucets. Alongside repair, we handle the upgrades these products often lead to: tub-to-shower conversions, walk-in shower installations, and bathroom vanity installations done to Miami-Dade code. Whether it’s a single cartridge swap in a Brickell condo or a full shower rebuild in a Coral Gables home, the approach is the same – diagnose the model, fix the real cause, back it in writing. New trim and fixtures are quoted upfront, and we walk you through options before any work starts.
We Also Service These Brands
Delta is one brand in a much wider stable. We also work with KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Kohler fixtures, which means a Miami bathroom or kitchen project doesn’t stall because one brand’s part is unavailable. One contractor, coordinated trades, from foundation to finish line.
FAQs – Delta Construction Service in Miami
No – it’s usually the pressure-balance cartridge, not the whole valve. A worn cartridge (often RP19804 or RP46074) or clogged inlet screens can’t hold temperature when pressure drops elsewhere in the house. Replacing the OEM cartridge and cleaning the screens typically restores stability. If the valve body is corroded, a conversion is the smarter path. Call (833) 968-1198 for a free diagnosis estimate.
Often, yes. Leaks usually come from the docking seal or the check valve inside the wand, and both are serviceable. Hard-water scale in Miami is the common driver, so descaling plus a new seal often solves it without a full replacement. If the internal valve is cracked, we’ll tell you and quote a replacement.
In most Miami-Dade cases, yes – a tub-to-shower conversion that alters plumbing or the shower pan requires a permit and inspection. We pull permits and coordinate the inspection as part of the job, so the work is documented and code-compliant. Call (833) 968-1198 and we’ll confirm the specifics for your address.
Because the drip at the base is usually the inlet O-rings or seals, not the cartridge. Changing the cartridge fixes spout drips; base seepage points to worn inlet seals or a loose mounting. Both are replaceable with the right OEM parts. We can trace it and quote the fix – call for a free estimate.
Repair the cartridge if the valve body is sound; replace the valve or convert to a walk-in shower if the body is pitted or corroded. A 20-year-old valve body with internal corrosion won’t hold a new cartridge for long, so during a remodel it’s often smarter to convert. Call (833) 968-1198 for both numbers.
Repairs are minor; conversions and remodels are the real investment. Here are typical Miami ranges:
| Service | Typical Miami Cost |
|---|---|
| Tub-to-Shower Conversion | $4,130 – $11,800 |
| Walk-In Shower Installation | $5,310 – $14,160 |
| Bathroom Vanity Installation | $945 – $3,540 |
| Bathroom Remodel | $10,620 – $33,040 |
Call (833) 968-1198 for an exact quote – estimates are free. $1,000 off projects over $10,000 and 0% financing for 18 months are available.
Book Your Delta Service in Miami, FL
Whether it’s a Monitor cartridge, an In2ition leak, or a full tub-to-shower conversion, we’ll diagnose the model, fix the real cause, and back the work with our 730-Day Done Right Promise. Upfront pricing, live person 24/7. Call (833) 968-1198 for your free estimate in Miami.
Written by the team at Groundwork Construction Co.