Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Opa-locka, FL
We provide independent CWS service across Opa-locka, from impact window and slider work to aluminum fence repair and replacement. What sets our CWS work here apart is old masonry: the city’s 1926 Moorish Revival buildings along Ali Baba Avenue and Sharazad Boulevard were framed and anchored to 1920s standards, so a standard South Florida install plan doesn’t transfer. Our technicians have up to 12 years of experience on CWS-branded window, door and fence assemblies, and every job is backed by our 730-Day Done Right Promise. Call (833) 968-1198 for a free estimate.

Why Opa-locka Residents Choose Us for CWS Service
Groundwork Construction Co. of Miami is an independent CWS service provider. We’re not affiliated with, authorized by, or endorsed by CWS, and we make no warranty claims on the brand’s behalf. That independence is the point: we work on CWS-branded assemblies every week, so what we tell you comes from how these products actually age in Opa-locka heat, rain and wind, not from a manufacturer script.
Calls are answered by a live person, 24/7. No voicemail, no waiting until Monday. When a CWS slider won’t latch before a storm, you reach someone who can talk through it. We source OEM-compatible parts where they exist and matched aftermarket equivalents where a model line has been discontinued, and we quote the work in writing before anything gets opened up. Upfront pricing, no surprises. That’s how CWS service should run.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Solve in Opa-locka
- Fogged insulated glass units on older CWS impact windows. Opa-locka’s sun load is relentless, and the desiccant inside an older IGU saturates years before the frame fails. The glass hazes, the unit stops insulating, and homeowners assume the whole window is done. Usually it isn’t.
- Corrosion and pitting on aluminum frames and fence posts. Salt-laden summer rain and standing water held against stucco walls breach the factory finish, and once the aluminum is exposed it pits. This shows up most on fence posts set close to walls that stay wet after heavy rain.
- Anchor and fastener pull-out on 1920s load-bearing masonry. CWS window and shutter tracks were often fastened into walls with no modern blocking. Hurricane-season wind-driven rain finds those gaps first, and so does movement.
- Sticking rollers, bent tracks and misaligned panels. Repeated storm-panel deployment cycles plus settlement in aging stucco-over-block openings knock CWS sliding units out of square. Panels start dragging and won’t seat.
- Failed perimeter seals behind stucco. When the exterior joint fails, water tracks behind the stucco instead of shedding off. You see it as interior staining weeks after the storm that caused it.
CWS Service in Opa-locka: What Local Conditions Mean for Your Equipment
Here’s the condition that shapes every CWS job in Opa-locka’s historic core: the 1926 Opa-locka Company buildings along Ali Baba Avenue and Sharazad Boulevard use load-bearing masonry with decorative parapets and domes, and the openings are arched and ornamented rather than standard rectangular rough openings. That single detail changes the plan. A CWS impact window or shutter install on these facades has to be worked around the arch geometry and the ornament, and any fastening has to respect masonry that was never blocked for modern anchors. On top of that, opening walls in these buildings frequently reveals non-standard 1920s framing and no modern ties, which means an engineering review comes before roof or structural modification, not after. Hialeah and Miami Gardens don’t present this. Opa-locka does. If you own one of these buildings, plan the CWS scope around preservation expectations from the start, because retrofitting after the fact costs more.
CWS Models & Products We Service in Opa-locka
We handle the CWS Industries impact-rated aluminum window and sliding-glass door series, including single-hung, horizontal slider and fixed picture units. We also work on CWS storm panel and accordion shutter systems sold through South Florida distribution, CWS vinyl and aluminum fence panels in privacy, picket and ranch-rail configurations, and CWS aluminum railing and screen-enclosure framing used on low-pitch roof and porch assemblies.
Our parts approach is straightforward. Where the frame and finish are sound, OEM glazing units, rollers, weatherstripping and replacement panels are the right call. Where a model line is discontinued, a matched aftermarket IGU or hardware set from a reputable South Florida supplier is a practical substitute. We don’t claim local stock; parts are sourced per job. On a sound CWS frame, repair is usually the better value. Replacement makes sense when the aluminum is corroded through, the opening needs re-anchoring into historic masonry, or an impact rating upgrade is the actual goal.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Opa-locka
Pricing depends on unit count, opening condition, and how much anchoring or masonry work the frame needs. Here’s what the work runs in the Opa-locka market.
| Service | Typical Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Roof Repair | $400 – $1,800 |
A free estimate includes an on-site look at the openings, a check of the anchoring and any hidden framing, and a written line-item quote. If we find non-standard 1920s framing behind the wall, you’ll hear about it before work starts, not after. Call (833) 968-1198 for an exact quote. Estimates are free.

Serving Opa-locka, FL – Our Local Coverage Area
We serve Opa-locka and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Opa-locka
Yes, but it takes planning. The arch geometry and decorative surrounds mean standard rectangular rough-opening assumptions don’t apply, and the anchoring has to be engineered for load-bearing masonry. We start with an on-site look at the opening and the ornament before quoting. Call (833) 968-1198 to schedule that estimate.
Because Opa-locka’s sun exposure and building orientation differ from Miami Gardens, and older CWS IGUs haze when the desiccant saturates. It’s a glass-unit failure, not a frame failure in most cases, and a glazing replacement often fixes it. Call (833) 968-1198 for an assessment.
It does. These walls were built without modern blocking, so anchors can pull out under hurricane-season wind load. A proper install adds blocking or re-sets the anchors. We check what’s behind the stucco before fastening anything. Call (833) 968-1198 to get that checked.
It holds up well when the factory finish stays intact and posts aren’t set in standing water against a wall. Once the finish is breached, salt-laden rain starts pitting the aluminum. We assess the finish and the drainage at the posts before recommending repair or replacement. Call (833) 968-1198.
Bent panels usually get replaced if the track and anchoring are still sound, since a bent panel may not seat and can compromise the whole assembly. If the track is also worn or the anchors are loose, the scope grows. Call (833) 968-1198 for a free estimate before the season.
Service Areas Near Opa-locka
We also work in Miami, Brownsville, Gladeview, Miami Springs and West Little River, and we cover CWS assemblies in Pinewood and Westview as well. If you’re just outside these areas, call and we’ll tell you straight whether we cover your street. You can also review our Opa-locka service area page for coverage details.
Book Your CWS Service in Opa-locka Today
Call (833) 968-1198 to schedule your free estimate. A live person answers 24/7, and we’ll walk through the opening, the anchoring, and what the work actually costs before you commit. Repairs and replacements are scheduled as quickly as the scope allows. Written quotes, no change-order games, and the 730-Day Done Right Promise behind the work.
Written by the team at Groundwork Construction Co. of Miami.