A Groundwork company - serving Miami, FL

Custom & Geometric Windows in Miami, FL

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Custom & Geometric Windows in Miami, FL

Custom and geometric windows are made-to-order units cut to a shape or size that no stock window matches: arches, half-rounds, trapezoids, circles, eyebrows, angled corner glass, and oversized picture panes. Homeowners in Miami ask for them when a stock window would leave a dead wall, fight the architecture, or block a view they paid for. We handle the full scope – measuring on site, ordering to spec, engineering for Miami-Dade wind loads, and installing with a single accountable crew. Call (833) 968-1198 for a free estimate and design consult, and we’ll tell you straight whether a custom unit is worth it or whether a standard size will do the job for a fraction of the price.

This work sits inside our larger Windows & Doors service, so if you’re also replacing sliders, French doors, or impact glass elsewhere in the house, it all runs on one schedule with one point of contact. Our technicians bring up to 12 years of experience to shaped and oversize glazing.

Key Takeaways

  • Custom and geometric windows are built to a shape or dimension stock units don’t offer – arches, rounds, trapezoids, angles, and full-height picture glass.
  • Miami’s wind-borne debris rules mean shaped windows need impact-rated glass and correct product approval, not just a nice-looking frame.
  • Expect custom shaped units to run roughly two to three times the cost of a comparable standard rectangle, plus framing and finish work.
  • Every job is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right.

When You Need Custom & Geometric Windows

Most Miami homes don’t need a custom window. When they do, the reason is usually obvious once you stand in the room. Here’s what sends people our way:

  • You have an arched or gabled wall with nothing in it. A lot of Coral Gables and Pinecrest homes have a gable end or a curved stairwell wall where a rectangle window looks slapped on. A true half-round or eyebrow unit follows the roofline and turns a blank wall into the best light in the house.
  • A stock size won’t fit the opening without ugly filler. Older Miami homes rarely have openings that match modern stock dimensions. When the gap is more than an inch or two, a made-to-measure unit beats a rectangle plus shims, trim, and a patched wall.
  • You’re chasing a specific view. Waterfront and high-rise-adjacent homes in Coconut Grove and along Biscayne Bay often want a wide, low picture window or an angled corner unit that frames the water without a mullion cutting through it. That’s a custom dimension, not a catalog item.
  • You want glass in a space a rectangle can’t reach. Under a sloped ceiling, beside a curved wall, in a clerestory above a door – geometric shapes put glass where stock windows can’t go.
  • Your HOA or historic district calls for it. Some Miami neighborhoods and historic overlays expect a particular window profile. If a standard unit breaks the look, a shaped custom window keeps you compliant and keeps the architecture intact.
  • An existing custom window has failed. Shaped units are harder to replace than rectangles, and a lot of them get “fixed” with the wrong glass. If your arched window is fogged, leaking, or stuck, we can match the profile and swap it correctly.

One honest note before we go further: custom and geometric windows are a specialty, and not every wall needs one. If a standard size works, we’ll say so. That’s part of the upfront pricing, no-surprises approach – we’d rather tell you the cheaper answer than sell you a shaped window that doesn’t earn its cost.

Our Custom & Geometric Windows Process

Shaped and oversize windows have more moving parts than a standard swap: the opening has to be built or corrected, the unit has to be engineered and approved, and the install has to be watertight in a place that gets hammered by rain and sun. Here’s how we run it from first call to final walkthrough.

  1. On-site measure and design consult. We come out, measure the actual opening (not the old window), look at the framing and wall structure, and talk through shape, size, glass, and finish. This visit is free, and you get a real design conversation, not a sales pitch.
  2. Product selection with brands you know. We work with a curated set of window partners – Andersen and Marvin among them – so you’re choosing from proven lines, not whatever’s on a shelf. For shaped units, the brand choice matters because not every manufacturer builds every geometry, and approval for Miami-Dade wind loads narrows the field further. We match the product to the shape, not the other way around.
  3. Engineering and permitting. Miami-Dade and the surrounding jurisdictions require impact-rated glazing and the correct product approval for wind-borne debris regions. We handle the paperwork, the product approval documentation, and the inspection sequence so the unit is legal and insurable when it’s done. This is where cheap bids fall apart, and it’s why we don’t skip it.
  4. Framing and opening prep. A geometric window usually needs the opening built or corrected first – a curved header, an angled rough opening, a properly flashed sill. We do that structural prep as part of the job so the unit lands square, seals right, and doesn’t leak at the corners.
  5. Installation by background-checked, uniformed technicians. The unit goes in with correct flashing, sealant, and trim, and we check operation and drainage before we call it done. Most standard-sized jobs finish in a single visit; complex shaped installs may run a couple of days depending on the framing work.
  6. Final walkthrough and the 730-Day Done Right Promise. We walk the finished work with you, confirm the glass, operation, and finish, and back the whole thing with our 730-Day Done Right Promise – if it’s not done right, we make it right. Built to last, backed in writing.

Throughout, calls are answered by a live person, 24/7. No voicemail, no waiting until Monday. If something comes up mid-project, you reach a real human.

Custom & Geometric Windows Pricing in Miami

Custom and geometric windows in Miami typically cost more than standard replacements, and the honest reason is the number of one-off parts: the shaped frame, the made-to-order glass, and often the framing to build the opening. Here’s a realistic range by type. These are ballpark figures for planning – your exact number depends on size, glass, brand, and how much framing the opening needs, and you’ll get it in writing before any work starts.

Window Type Typical Installed Range What Drives the Price
Standard rectangle replacement (baseline) Roughly $600 – $1,400 per unit Size, glass package, brand line, trim
Half-round or eyebrow arch Roughly $1,200 – $3,000 per unit Radius, glass, whether framing must be built
Full arch or circle Roughly $1,800 – $4,500 per unit Diameter, custom frame, glazing spec
Trapezoid or angled/polygon Roughly $1,500 – $3,800 per unit Number of angles, size, engineering
Oversize picture / corner glass Roughly $2,000 – $6,000+ per unit Span, weight, structural support, view glass
Framing, flashing, and opening prep Roughly $400 – $2,500 per opening Whether the wall must be built or corrected

What pushes a Miami job toward the top of these ranges: impact-rated glass for wind-borne debris regions, oversize units that need heavier framing and more than one person to set, second-story or high-reach installs that need staging, and historic or HOA requirements that limit your product options. What keeps it lower: a single shaped unit in an existing opening that’s already correctly framed, and standard brand lines rather than a premium wood or custom-finish package.

We keep pricing honest and visible. You get no-hassle upfront pricing – the number you see is the number you pay – and 0% financing for 18 months to spread a larger window project out. Projects over $10,000 also get $1,000 off. So if you’re replacing a whole run of shaped windows, or pairing custom glass with new doors, the math gets easier. Ask for the free project estimate and design consult; there’s no charge to get a real number.

Is it cheaper to repair or replace a custom window? Usually replace, especially if the glass is fogged, the frame is rotted, or it leaks at the seal. A shaped window that’s failed at the glass or frame is rarely worth patching twice. Call (833) 968-1198 and we’ll tell you which one makes sense for your unit.

Why Miami Homeowners Call Us for Custom Glass

Shaped windows are unforgiving. Get the engineering wrong and the unit fails inspection; get the flashing wrong and it leaks in the first summer storm; get the measurement wrong and a made-to-order unit is scrap. We bring the whole scope under one roofer-and-framer’s eye – measure, engineer, permit, frame, install, finish – so nothing falls between trades. And we back it with the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space.

That matters more in Miami than in most places. Our climate is a stress test for glass and seals: high humidity, salt air near the coast, and a hurricane season that doesn’t forgive a weak install. Beyond the weather, this is a market where buyers and insurers ask hard questions about window ratings and permits. Doing it right the first time protects your home’s value, not just your view. Our technicians bring up to 12 years of experience to that work, and every one of them is background-checked and arrives in uniform. When we’re done, you’ll see the whole picture on our Miami service area page and in the walkthrough, not in a vague promise.

We also keep trust visible where it counts: a live person answers the phone 24/7, estimates are free, and financing and the current promotions are stated plainly rather than buried in fine print. It all comes back to one idea – a homeowner shouldn’t have to gamble on their biggest investment.

FAQs – Custom & Geometric Windows

How much do custom and geometric windows cost in Miami?

Most custom shaped windows in Miami run roughly $1,200 to $4,500 installed depending on the shape, size, and glass, with oversize picture and corner glass reaching $6,000 or more, plus framing if the opening must be built. The single biggest cost driver is whether the wall already has a correctly framed opening or whether we have to build one. Call (833) 968-1198 for an exact quote – estimates are free.

Can you install a custom window the same day?

Installation itself is often a single visit, but a truly custom or geometric window isn’t a same-day purchase – the unit is made to order and has to be engineered and approved first, so lead time runs weeks, not hours. Stock rectangular replacements move much faster. If you’re weighing a custom shape against a standard size, call us and we’ll tell you which one fits your timeline.

Do custom windows in Miami need impact-rated glass?

In most cases, yes. Miami-Dade and nearby jurisdictions sit in a wind-borne debris region, so shaped and oversize windows generally need impact-rated glazing and the correct product approval to pass inspection and keep your insurance valid. We handle the engineering and permit paperwork so your unit meets the requirement. Call (833) 968-1198 and we’ll confirm what your specific address needs – estimates are free.

Is it cheaper to repair or replace a geometric window?

Replace, most of the time. When a shaped window’s seal has failed, the glass is fogged, or the frame is rotted or leaking, patching it rarely lasts and can cost you twice. A correctly engineered replacement solves the wind-load, water, and insulation problems at once. Call us for a straight answer on your unit before you spend money on a repair that won’t hold.

Can you match the shape of an existing arched or angled window?

Yes. We measure the actual opening and match the profile, glass, and finish so the replacement looks like it belongs on the house. Custom windows are ordered to your exact geometry, not cut from a standard size, which is why the fit holds. Call (833) 968-1198 to set up a free measure and design consult.

Get a Free Estimate on Custom & Geometric Windows in Miami

If you’ve got a shaped wall, a view worth framing, or an arched window that’s seen better days, the next step is simple. We’ll come out, measure the real opening, talk through shapes and glass, and give you a written, upfront price with no surprises. Custom and geometric windows are a specialty job in Miami, and we do it with the engineering and the paperwork handled, the install done by background-checked, uniformed technicians, and the whole thing backed by the 730-Day Done Right Promise. Call (833) 968-1198 today – a live person answers around the clock, and your estimate and design consult are free.

Written by the team at Groundwork Construction Co. of Miami, serving Miami.

Need Construction help in Miami? Licensed & insured · free written estimates
Call (833) 968-1198
Local Service Coverage

Request a Free Estimate in Miami

Tell us what you need - Groundwork Construction Co. of Miami responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch