Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Coral Gables, FL
We provide independent Jerith service throughout Coral Gables, from full aluminum fence installation to gate repair and section replacement. The thing that makes our work here different: every crew we send out knows the Board of Architects submittal process as well as it knows a powder-coat finish, because in Coral Gables those two things decide whether your fence goes up this month or next quarter. We’re a Jerith specialist and an independent provider, not affiliated with or authorized by the manufacturer. Reach us at (833) 968-1198 for a free estimate.

Why Coral Gables Residents Choose Us for Jerith Service
Jerith builds a specific, recognizable product: welded aluminum panels, a powder-coat finish, and post-mount hardware that has its own quirks. We work with Jerith service exclusively, which means we’ve handled the Baron Series, Riviera Series, Charleston Series, and Traditional Series enough times to know how each one ages in South Florida air. That matters in a city where the finish and profile you choose has to survive both a design review and a hurricane season.
We source OEM Jerith replacement pickets, brackets, and hardware wherever those parts still exist. For discontinued colors or series, we specify aftermarket components with equivalent alloy and powder-coat warranty so a repair doesn’t leave you with a mismatched panel. And we plan every Coral Gables job around the approval timeline, not against it. That’s the difference between a fence that clears review and one that sits in revision.
Estimates are free, pricing is upfront, and every job is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Solve in Coral Gables
What goes wrong with Jerith aluminum in Coral Gables is rarely the fence itself. It’s UV, salt, and fasteners. Here’s what we see most:
- Powder-coat chalking and fade on south-facing panels. Coral Gables sun is relentless, and darker Jerith colors absorb more heat. After several seasons you get chalky, washed-out panels on the sun-exposed run while the shaded side still looks new.
- White rust at hinges and latches. Stainless-steel screws contacting aluminum pickets set up galvanic corrosion, especially with salt-laden air moving in from the coast. The result is loose hardware and a white residue that won’t scrub off.
- Leaning or heaved posts. Coral rock makes for hard digging, and seasonal downpours test any footing that was set shallow or without drainage. Posts heave, the run misaligns, and gates start dragging.
- Gate sag after hurricane season. Repeated wind loading works undersized hinges and warps panels, so the latch stops catching and the gate scrapes the ground.
- Approval-related stalls. A fence built in a color or style the Board of Architects doesn’t approve has to come down or get revised. We see this most on renovations where a previous owner installed without sign-off.
Each of these is fixable. Most are cheaper to fix early than after a gate fails.
Jerith Service in Coral Gables: What Local Conditions Mean for Your Equipment
Here’s the fact that changes everything about fence work in Coral Gables: the city requires Board of Architects approval for new fences, including color and style, because the whole municipality runs under a Mediterranean Revival design code. That’s not a formality. A standard Jerith aluminum fence in a finish the Board hasn’t blessed can stall for weeks while the application cycles through review, and a resubmittal costs you another round.
Compare that to neighboring Miami or South Miami, where the same fence might go up without any design review at all. In Coral Gables, a contractor who hasn’t submitted fence applications before doesn’t know which Jerith series and finishes clear review cleanly, or how to prepare a submittal that avoids revisions. We do. If your property sits in a historic district, the Historic Preservation Board adds another layer, and we plan for both from the first site visit.
On the material side, the same subtropical climate that drives design standards also drives wear. A typical Jerith aluminum fence in Coral Gables shows powder-coat fade on the sun-exposed side and white rust at the hinges after several hurricane seasons. The usual cause is UV degradation plus galvanic corrosion between stainless fasteners and the aluminum, often worsened by salt-laden air. A qualified local pro would clean and touch up the affected panels with a matching Jerith-approved coating, replace corroded hardware with isolation washers, and check post footings for movement, correcting any lean before it affects gate operation.
Jerith Models & Products We Service in Coral Gables
We handle the full Jerith residential lineup: the Baron Series aluminum ornamental fence, the Riviera Series, the Charleston Series, and the Traditional Series picket fence, plus the gates that go with them. Each series has its own picket spacing, rail profile, and hardware set, so we match components to the series rather than forcing a generic part.
Parts are ordered per job. We don’t claim local stock or same-day material availability, because we’d rather tell you the honest lead time than promise a part we don’t have. When OEM is available, we use it. When a color or series is discontinued, we specify an aftermarket equivalent and put the specs in writing so you know exactly what alloy and finish warranty you’re getting.

We’re an independent provider, not affiliated with or authorized by Jerith. We simply know the product well enough to work on it correctly.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Coral Gables
Fence pricing in Coral Gables depends on run length, gate count, series, finish, and how much coral rock we hit on the dig. Here’s what the work typically runs:
| Service | Typical Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
A free estimate includes a walk of the property, measurements, a check of any prior approval or permit history, and a written line-item quote. The number you see is the number you pay. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months. Call (833) 968-1198 to schedule yours.
Serving Coral Gables, FL – Our Local Coverage Area
We serve Coral Gables and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Coral Gables
Yes. Coral Gables requires Board of Architects approval for new fences, including the color and style, under the city’s Mediterranean Revival design code. We prepare the submittal as part of the job so your fence clears review without avoidable revisions. Call (833) 968-1198 to talk through your project.
Salt air accelerates galvanic corrosion where stainless fasteners meet aluminum, which shows up as white rust and loose hinges faster than it would inland. Jerith’s powder coat holds up better than most, but it still needs periodic cleaning and touch-up on the coastal side. An annual rinse and a hardware check go a long way.
In most cases you can replace just the damaged section, as long as the surrounding panels still have sound finish and structure. We match the picket profile and hardware to your existing run, and we use OEM Jerith parts whenever they’re available. Call (833) 968-1198 for an exact quote.
Most Jerith aluminum fence installations in Coral Gables land between $4,000 and $10,000 depending on run length, gate count, series, and site conditions. Coral rock digs and design-review submittals both factor into the final number. Estimating is free, so call (833) 968-1198 for a written quote.
Repeated wind loading stresses hinges and latch hardware, and posts set shallow or without drainage will heave and lean. We check footings and set them at a depth that holds through a South Florida storm season. If your gate is already sagging, call (833) 968-1198 for an assessment.
Service Areas Near Coral Gables
We also serve homeowners in Miami, Brownsville, Miami Springs, Coral Terrace, and West Little River, along with nearby Glenvar Heights and South Miami. Every project runs through our Coral Gables service area team, so the same standards follow you across the county line.
Book Your Jerith Service in Coral Gables Today
Whether you need a new Jerith fence installed or a sagging gate repaired before the next storm, we can help. Calls are answered by a live person around the clock. Call (833) 968-1198 for a free estimate and we’ll walk your property and give you a written quote.
Written by the team at Groundwork Construction Co. of Miami.