Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Kitchen Remodeling: The Miami Owner’s Guide
Cambria quartz is engineered stone, so “Cambria parts” in a kitchen almost always means the things that hold it up or sit on top of it: the cabinets, the sink cutout and undermount brackets, the backsplash tile, and the LED undercabinet lighting. When one of those fails, we match the replacement to your existing Cambria slab thickness, edge profile, and cabinet layout rather than asking you to start over. A full Cambria kitchen remodel in Miami runs $16,520 to $53,100 installed, and smaller kitchens land between $10,620 and $23,600.

Most owners here don’t discover a problem until something gives. The undermount sink starts pulling away from the Cambria edge and you can see daylight underneath. A cabinet box swells after a humid summer and the slab above it rocks when you press on the corner. Or the backsplash grout line behind the cooktop turns black no matter how hard you scrub. In Miami, humidity and salt air find the weak points faster than almost anywhere else, and that’s usually where the first call comes from.
Key Takeaways
- Most Cambria kitchen “part” failures in Miami trace back to cabinets, sink brackets, or backsplash sealing, not the quartz itself.
- Countertop-only installation runs $2,360 to $7,670; cabinet installation runs $4,720 to $15,340.
- A 3cm Cambria slab weighs roughly 18 to 20 lbs per square foot, which is why failing cabinets can’t simply be patched.
- All work is covered by the 730-Day Done Right Promise, backed in writing.
Which Cambria Models This Applies To
Cambria sells quartz by design line rather than by part number, and the series names matter when you’re replacing anything that touches the slab. The natural collection (British, Welsh, Cornish, Coastal groups) tends to run in classic 2cm and 3cm thicknesses. The newer luxury and signature designs often favor 2cm or a specific slab format that changes how an undermount sink gets braced and how an edge gets profiled. When we quote a replacement, we ask for the design name from your original paperwork or the small mark on the underside of the slab, not just a photo.
Identifying the right trim, bracket, or backsplash piece in a Cambria kitchen comes down to three measurements: slab thickness (2cm or 3cm), the edge profile (eased, beveled, or a decorative built-up edge), and the exact cabinet-box dimensions underneath. An OEM bracket or trim piece matched to the original spec keeps the slab sitting the way it was engineered to. Quality aftermarket equivalents are fine for things like sink clips, LED channel, or tile trim as long as the load rating and material match. Where owners get burned is buying generic parts for a Cambria-specific cutout and finding out the hard way that the support was never sized for a 20-lb-per-square-foot slab.
Groundwork Construction Co. of Miami is an independent service provider and is not affiliated with Cambria. We work with the slab you have and source the parts that fit it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Kitchen Remodeling Is Failing
- Undermount sink pulling away from the slab. The epoxy or clip system that held the sink to the Cambria has failed, usually because the cabinet box shifted or the original bracket wasn’t rated for the sink’s weight. Left alone, the sink drops and can crack the quartz edge above it.
- Cabinet boxes swelling or delaminating under the countertop. Miami humidity plus a slow leak from the dishwasher or sink finds the particleboard first. When the box softens, the Cambria slab above it starts to rock and the seams open.
- Cracks radiating from a cutout corner. A sink or cooktop cutout creates a stress point in the quartz, and a cabinet that flexed or a counter that got hit can start a hairline crack that travels. Cracks in engineered stone don’t heal on their own.
- Backsplash grout or caulk failing behind the cooktop. Heat, grease, and humidity break down the seal, and water works behind the tile. In Miami this is one of the most common reasons a Cambria backsplash has to come off for resealing or replacement.
- LED undercabinet lighting flickering or dead in sections. Usually a failed driver or a corroded connection where the kitchen’s humidity got into an unsealed junction. A dead strip is easy to spot; the failed driver behind it isn’t.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Every quote from Groundwork is upfront pricing with no surprises: the number you see is the number you pay, and you get a written line-item breakdown of parts and labor before anyone touches the kitchen. Here’s what Cambria kitchen work runs in Miami:
| Job | Installed Range (Miami) |
|---|---|
| Full kitchen remodel, Cambria included | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What drives the range is cabinet-box condition, whether the slab needs to come off to repair what’s underneath, the backsplash material, and island size. Parts and labor are quoted separately so you know exactly what you’re paying for. The workmanship carries the 730-Day Done Right Promise – if it’s not done right, we make it right – and we’re proud to serve Miami and nearby communities with that same standard.

DIY or Call Us?
Some things you can safely check yourself. Look under the sink for daylight, water stains, or a bracket that’s backed out. Press down on each corner of the Cambria to see if the cabinet rocks. Check the caulk line behind the cooktop for gaps. What you shouldn’t do is try to lift or re-seat a 20-lb-per-square-foot stone slab yourself, or loosen a sink bracket while the slab is still loaded. Engineered stone fails suddenly and without warning, and the consequences are not just a cracked counter – it’s a kitchen out of service for weeks. Beyond those checks, call a professional.
If something looks off, call Groundwork Construction Co. of Miami at (833) 968-1198 for a free estimate. A live person answers 24/7.
FAQs
How long does Cambria quartz last in a Miami kitchen? A properly supported and sealed Cambria slab routinely lasts 20 to 30 years, and often longer. The failure point is almost never the quartz; it’s the cabinet box underneath, the sink bracket, or the backsplash seal. Those are what we replace.
Can a failing Cambria countertop be repaired instead of replaced? Often yes. If the slab is intact and only the support or sink bracket failed, we can lift and re-seat the slab without replacing it. If there’s a crack through the cutout, replacement is usually the safer call.
How long does a Cambria countertop or cabinet swap take? A countertop-only installation is typically 1 to 2 days. A cabinet installation under a Cambria slab generally takes 2 to 4 days depending on layout and whether a new sink or island is involved.
How do you source Cambria-compatible parts? We match to your design name, slab thickness, edge profile, and cabinet dimensions, then source OEM where it matters and quality aftermarket where it’s safe. You get the parts line-item in the written quote before we order.
We also work with KraftMaid, Silestone, and Kohler on the same projects, so you can keep your kitchen coordinated from foundation to finish line.
Ready to price your Cambria kitchen work? Call Groundwork Construction Co. of Miami at (833) 968-1198 for a free estimate. Live person, 24/7. Ask about 0% financing for 18 months and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.