Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Home Additions & ADU: The Miami Owner’s Guide
If you’re planning a home addition or ADU in Miami and want Silestone quartz surfaces as part of the build, our team installs those counters, vanities, and wet-bar tops with a typical project price of $53,100 – $153,400 for a home addition and $106,200 – $259,600 for a full ADU. In most cases the surfaces are templated after framing and drywall are done, then installed on a set schedule, not the same day. Owners usually discover a surfaces problem late: seams that won’t close at a corner built out of square, a counter cut too tight against an exterior wall that expands in Miami heat, or a slab marked for one section that doesn’t match the fabrication drawings. When a finished Silestone top is already in place and failing, it shows up as a visible crack near a sink cutout, a hazy ring where water sat, or a seam that opens and closes with the seasons.

Which Silestone Models This Applies To
Silestone surfaces aren’t a mechanical part with a serial number you replace like a garage spring. The piece you’re matching is usually a solid quartz slab from a specific Silestone color line, and color matters because the pattern runs through the body of the material. Some colors, particularly the jumbo-format slabs, come from taller stock that lets one slab span an island up to a certain width without a seam. If your build needs a run wider than what your chosen color offers, you’re either seaming it or choosing another color in the line. That’s the compatibility gotcha most Miami owners hit after the fact.
To identify what you have, look for the fabricator’s label on the underside of the overhang or an etched mark inside a cutout. Slab thickness is usually 2cm or 3cm, and the fabrication edge profile was likely built for 3cm. Measure the existing slab and note the color name from any paperwork the previous fabricator left. On the OEM question: Silestone factory pieces match perfectly, and quality third-party fabricators can replicate many profiles if they have the right template and blade. For visible additions work, match the color exactly; for a hidden top like a laundry counter, a carefully matched alternative is a reasonable call. Groundwork Construction Co. of Miami is an independent service provider and is not affiliated with Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Home Additions & ADU Is Failing
- A hairline crack radiating from a sink or cooktop cutout. Quartz is strong in compression but brittle at a tight inside corner, and a fabrication cut that wasn’t eased leaves a stress point. Miami’s daily temperature swings through an unconditioned addition aggravate that corner until it splits.
- A seam that visibly opens and closes. Silestone moves with temperature and humidity like any stone. In an addition or ADU that sits on a slab with no thermal break, seams set with a rigid epoxy bond can telegraph that movement instead of absorbing it.
- Hazy rings or a dull patch near a sink. Quartz is non-porous but not stain-proof from harsh cleaners. A citrus or vinegar-based cleaner left sitting etches the polish, and some Miami tap water leaves mineral haze that reads like damage.
- An edge that’s come unbonded from its substrate. On a cantilevered island overhang, a loose build-up strip under the slab lets the front edge flex when someone leans on it. That flex eventually shows as a chipped arris.
- A top that’s out of level against the cabinets. If the additions walls or cabinets settled after installation, the Silestone slab can’t follow. You’ll see gaps, uneven overhang, or a backsplash that separated at the wall joint.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Silestone repair or replacement inside a larger additions or ADU project, here’s what a Miami owner typically pays. These are installed ranges, parts and labor, not slab-only pricing.
| Scope | Installed range |
|---|---|
| Home addition (full project) | $53,100 – $153,400 |
| ADU construction | $106,200 – $259,600 |
| Garage conversion | $35,400 – $94,400 |
| Countertop installation (per surface) | $2,360 – $7,670 |
| Bathroom vanity installation | $945 – $3,540 |
| Kitchen island installation | $3,540 – $11,800 |
The range for a Silestone-specific swap depends on slab availability in your color, whether a new template is needed, and how much cabinet or drywall work is involved. Upfront pricing, no surprises: you get a written line-item quote before any demolition. Work is covered by our 730-Day Done Right Promise, and that’s in writing.
DIY or Call Us?
An owner can safely check a few things. Confirm the color name, measure the slab and overhang, photograph the crack or seam, and note whether the damage is near a cutout. What you shouldn’t do is attempt to cut, seam-bond, or lift a Silestone slab yourself. A 3cm quartz section over a typical island is heavy enough to cause serious injury if it slips, and an improperly bonded seam can fail later with a load on it. Cutting quartz also releases silica dust, which requires wet-cutting and proper respiratory protection, not a shop vacuum in a closed garage. Our technicians have up to 12 years of experience with templates, seams, and cutouts. For a free estimate on your additions or ADU surfaces, call (833) 968-1198.
FAQs
Silestone quartz typically holds up for 15 – 25 years when it’s installed over a stable substrate and cleaned with a pH-neutral product. The failure points in Miami are usually installation-related, not the slab itself: an unsupported overhang, a tight cutout, or a seam bonded rigidly across a moving joint. If your build is showing any of those, call (833) 968-1198 for an honest assessment. Estimates are free.
Sometimes yes. A clean chip at an edge can often be filled and polished to match, and a loose seam can be re-bonded if the substrate is corrected first. A crack that runs from a cutout to the edge, or a slab that’s already delaminated, usually needs replacement. We’ll tell you which one you’re looking at. Call (833) 968-1198 for a free estimate.
A single surface swap is often a one-day install once the template is done and the slab is in hand, but the template itself usually happens after cabinets or framing are complete. Lead times for a specific Silestone color can add days or more to ordering. We schedule the work so it fits the build sequence, not the other way around. Call (833) 968-1198 to talk through your timeline.
We source Silestone through our network of verified material partners, matching your color and slab format to the project before work begins. We also work with Cambria, KraftMaid, and Kohler across our kitchen and bath projects. We don’t stock slabs, so lead time depends on the color and quantity. Upfront pricing means you know the material cost before we order. Call (833) 968-1198 for a free estimate and design consult.
Planning an addition or ADU in Miami and want the surfaces done right the first time? Call Groundwork Construction Co. of Miami at (833) 968-1198 for a free estimate. A live person answers 24/7, technicians are background-checked and arrive in uniform, and projects over $10,000 qualify for $1,000 off and 0% financing for 18 months. From foundation to finish line, we build it and back it in writing.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.