Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Windows & Doors: The Miami Owner’s Guide
We install and service Schluter-compatible windows and doors here in Miami, typically landing between $5,310 and $17,700 for standard replacement and $9,440 to $29,500 for impact-rated units. Schluter’s window and door hardware line covers tilt-turn mechanisms, multi-point locking gear, hinges, handles, and gasket systems, and most failures show up as a sash that won’t seat, a handle that turns without engaging, or a draft you can feel across the frame. The parts themselves are rarely the mystery. Getting the right series match is where owners get stuck.

Groundwork Construction Co. of Miami is an independent service provider. We’re not affiliated with Schluter, but we know their hardware the way a Miami installer should, because the climate here stress-tests every seal and lock point on a schedule.
Key Takeaways
- Schluter hardware identification starts with the model label on the sash edge, not the frame.
- Salt air and humidity along Biscayne Bay corrode cheap aftermarket lock gear in 3 to 5 years; marine-grade OEM parts last longer.
- Impact-rated units in Miami-Dade need hardware that matches the NOA (Notice of Acceptance) on file, or the assembly loses its rating.
- Most hardware swaps finish in a single visit; full sash or unit replacement takes longer.
Which Schluter Models This Applies To
Schluter’s window and door hardware isn’t one universal kit. The tilt-turn and casement series use different gear than their lift-slide and fixed-frame lines, and the lock strip geometry changes between the older profiles and current production. Before you order anything, find the identification label: on Schluter units it’s usually a small plate on the top or side edge of the operable sash, sometimes inside the frame rebate. That sticker carries the model code, profile system, and production date. Photograph it.
Here’s the gotcha that catches people: the same handle style fits multiple Schluter series, but the spindle length and lock cam spacing differ. A handle that looks identical won’t engage if the cam is even 3mm off. Measure the spindle, the backset, and the distance between lock points before you buy.
OEM versus aftermarket is a real decision for Schluter. Their OEM gear carries the marine-grade coatings that hold up in Miami’s salt air. Quality aftermarket equivalents exist and cost less, but you need to verify the corrosion rating and confirm the part carries the same profile dimensions. For impact-rated assemblies in Miami-Dade, aftermarket hardware can void the product approval unless it’s part of the tested assembly. We check the NOA before we source anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Windows & Doors Is Failing
- Handle turns but the sash won’t lock. The multi-point cam has worn or slipped out of alignment, often after years of sun-driven expansion and contraction.
- You feel air moving across the frame on a windy day. The gasket has hardened or compressed, which happens fast in Miami humidity and UV exposure.
- The sash sags and drags on the sill. Hinge pins or the corner joint have loosened, and the weight of an impact-rated sash accelerates the wear.
- Corrosion or white powder around the lock strip. Salt air has gotten into the gear mechanism and started eating the finish and the metal underneath.
- Water stains or a soft spot at the sill or corner. The frame seal has failed and moisture is getting behind the assembly, which is a water-intrusion problem, not just a hardware one.
If you’re seeing two or more of these, the hardware is telling you it’s near the end of its service life. In Miami, that conversation tends to happen earlier than owners expect.
Replacement Cost & What’s Included
Hardware-only replacement on a Schluter-compatible unit usually runs a few hundred dollars per opening, parts plus labor, depending on the series and how many lock points you’re replacing. Full window replacement in Miami runs $5,310 to $17,700 for standard units and $9,440 to $29,500 for impact-rated installation. Door hardware and full door swaps follow similar lines.
What drives the range: the Schluter series, whether the part is OEM or a verified aftermarket equivalent, the number of operable openings, and whether we’re matching hardware to an existing NOA-approved assembly. We quote parts and labor as separate line items so you see exactly what the hardware costs and what the install costs. That’s upfront pricing, no surprises, and every install carries our 730-Day Done Right Promise. If the work isn’t right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely handle the diagnosis: find the sash label, photograph the model code, measure the spindle and backset, and note which openings fail. That information saves real time on the quote.
Where DIY goes wrong: impact-rated windows and doors in Miami are engineered assemblies. Swapping hardware without matching the tested configuration can compromise the rating that protects your home in a storm, and a misaligned multi-point lock can crack the sash profile when you force it. Replacing the hardware wrong once usually costs more than having it done right.
Our technicians have up to 12 years of experience matching Schluter hardware to the right series. Calls are answered by a live person, 24/7. Call (833) 968-1198 and we’ll schedule a free estimate.
FAQs
Expect 8 to 12 years for OEM hardware in Miami’s salt air, and 3 to 5 years for unprotected aftermarket gear. UV exposure and humidity along the coast shorten that. If your units are past the 10-year mark and the locks are getting stiff, the hardware is due. Call (833) 968-1198 for an exact quote, and estimates are free.
Sometimes, yes. A handle, a single hinge, or a gasket can usually be swapped without replacing the whole assembly. Multi-point lock gear that’s corroded through typically gets replaced as a unit. We’ll tell you which one you’re looking at during the estimate. Call (833) 968-1198 to schedule it.
Most hardware-only replacements finish in a single visit, often under two hours per opening. Full sash or unit replacement across multiple openings in a Miami home usually takes one to two days depending on count and access. We confirm timing in the written estimate. Call (833) 968-1198 to get yours.
We work from the model code on your sash label and cross-reference it against the profile system and production date, then confirm OEM or verified aftermarket availability. For impact-rated units, we check the Miami-Dade NOA before ordering so the replacement doesn’t compromise your rating. We don’t claim to stock parts or carry them on a truck. Call (833) 968-1198 and we’ll start the match.
Other Brands We Service
We also install and service windows and doors from KraftMaid, Cambria, and Silestone cabinetry and surface lines when a full project is in scope, plus the broader set of brand partners we work with across every trade. From foundation to finish line, one contractor, backed in writing.
When your Schluter hardware fails, you want a straight answer, an honest line-item price, and a crew that shows up on time. Call Groundwork Construction Co. of Miami at (833) 968-1198 to schedule your free estimate. We answer live, 24/7. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.