Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Home Additions & ADU: The Miami Owner’s Guide
We build CertainTeed-clad home additions and ADUs for Miami homeowners, and the installed price typically lands between $53,100 and $153,400 for an addition, or $106,200 to $259,600 for a detached or attached ADU, depending on footprint and finish level. The moment most owners start calling is when the part they can see is failing while the structure behind it is still sound: siding panels on a new wing chalk and warp before the framing has even settled, or a CertainTeed exterior trim piece on an ADU pops loose at a corner. That’s the point where you need a straight answer on what the component is, what it should cost, and who fixes it.

Groundwork Construction Co. of Miami is an independent service provider. We are not affiliated with CertainTeed. We work with CertainTeed products because they’re a real brand partner across our exterior and addition work, and because Miami’s sun, salt air, and four-month rainy season punish cheap cladding fast.
Key Takeaways
- CertainTeed exterior systems on additions and ADUs in Miami are installed, not stocked. We order the matched component to your product line and spec.
- Warranty coverage follows the part plus our workmanship, so matching the exact series matters more than grabbing a close-enough panel.
- Most failures we see in Miami trace to installation detail and moisture, not the material itself.
Which CertainTeed Models This Applies To
CertainTeed makes exterior cladding, trim, and accessory systems that show up on the additions and ADUs we build across Miami. The lines you’ll most often find on a South Florida project are the polymer siding series, the Cedar Impressions and Restoration Classic vinyl lines, and the coordinated trim and accessory pieces that connect them at corners, soffits, and transitions. Each line has its own profile dimensions and color lots, and a piece that looks identical on the wall may not lock into your existing panel.
The fastest way to identify what you have is to check the panel or carton label for the series name, color code, and profile number. If the box is gone, measure the exposed face width, the panel thickness, and the lock profile at the edge, then photograph the corner detail where it’s failing. Our technicians have up to 12 years of experience, and they can usually match a CertainTeed piece from those three measurements plus a color photo.
On the OEM-versus-aftermarket question: for CertainTeed exterior components, we recommend OEM or a manufacturer-approved equivalent. Aftermarket vinyl and polymer look cheaper up front, but they fade differently under Miami’s UV load and often won’t match the color lot of the rest of your wall. A mismatched panel on a new addition is visible from the street and hard to explain at resale. The comparison isn’t original versus generic here; it’s the right line versus a close-enough line that fails in two summers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Home Additions & ADU Is Failing
- Chalking or color fade on the sun-facing wall. Miami’s UV index bleaches vinyl and polymer faster than most climates; heavy chalk means the surface is breaking down and the panel is near the end of its service line.
- Panels lifting or rattling at corners. Usually a fastening or trim-detail failure, not the panel itself. Wind gets behind a loose corner during a summer storm and works the piece free.
- Moisture staining or soft spots behind the cladding. The exterior is shedding water correctly but a flashing or house-wrap detail at a transition is letting it in. This is the most common cause of interior wall damage on ADUs we open up.
- Warping or oil-canning along a panel face. Often traced to installation without proper expansion gaps; vinyl needs room to move in heat, and Miami attics and south walls get hot enough to buckle a tight panel.
- Mildew streaking that returns after cleaning. Persistent streaking on a shaded wall points to poor drainage or trapped moisture behind the siding, not just surface dirt.
Two of these are cosmetic and two are not. Chalking, fade, and mild streaking can wait a season. Lifting panels and moisture intrusion behind the wall shouldn’t, especially on a framed addition where wet sheathing turns into rot fast in Miami’s humidity. When we inspect, we open the suspect detail rather than guessing from the outside.
Replacement Cost & What’s Included
For a Miami homeowner, a full addition ranges from $53,100 to $153,400 installed, and a full ADU build runs $106,200 to $259,600. Those are whole-project numbers, not a single part. When the issue is one failed component on an existing addition, the repair is far smaller, and we quote it line by line after we’ve seen it.
What drives the number on an addition or ADU is straightforward: square footage, foundation and site work, roof complexity, window count, and the finish level you choose on the exterior. CertainTeed exterior systems sit in the mid-to-upper finish tier, and they’re worth it on a Miami build because they hold color and shed water better than budget cladding. Every Groundwork bid is upfront and itemized. The number you see is the number you pay, and there are no change orders hiding in the fine print.
The work is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right, for two full years after completion. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
Typical Miami price ranges
| Project | Installed range |
|---|---|
| Home Addition | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some checks are safe. You can photograph the failing detail, measure the panel face width, read the carton or panel label, and note where the water is coming in. Those three things let us quote faster and get the right CertainTeed component ordered the first time.
What we don’t recommend is opening the exterior wall yourself, re-flashing a transition, or crawling onto a roof to look at the cladding from above. On an addition or ADU, the detail that’s failing usually ties into the weather-resistive barrier and the roof edge, and a wrong re-flash job lets water in worse than the original. Roof-level and wall-opening work needs a trained professional with fall protection and a real repair detail behind it.
If your CertainTeed wall or trim component is failing on a Miami addition or ADU, call (833) 968-1198. A live person answers 24/7, and the estimate is free.
FAQs
Roughly 20 to 30 years for quality vinyl and polymer lines under normal conditions, but Miami’s sun and salt cut that. On a sun-exposed south or west wall, expect color fade and chalking by year 12 to 15, and plan on trim and accessory pieces wearing out before the main panels.
Often yes. A lifted panel, a failed trim piece, or a loose corner detail can usually be re-secured and re-flashed without replacing the whole wall system. If the moisture has reached the sheathing or the panels are warped across the face, repair won’t hold and we’ll tell you that plainly.
A single-component repair is usually one visit, often a few hours. Re-cladding a wall section on an addition typically runs one to three days once the matched CertainTeed material is on site. We’ll give you a real timeline with the written quote, not a guess.
We match your part to the exact CertainTeed line using the panel label, measurements, and color code, then order it through our supplier network. We’re an independent provider, not CertainTeed itself, so we order to your spec rather than pulling whatever’s on a shelf. That’s how you avoid a panel that fades at a different rate than the rest of your addition.
For a kitchen or bath inside an addition, we also work with KraftMaid, Cambria, and Silestone, so the whole project can run through one contractor from foundation to finish line.
Schedule Your Free Estimate
If your CertainTeed addition or ADU in Miami has a failing component, moisture getting in at a transition, or cladding that’s past its color and service life, call Groundwork Construction Co. of Miami at (833) 968-1198 for a free estimate. A live person answers around the clock, background-checked, uniformed technicians handle every project, and the pricing is upfront with no surprises. We’ll look at the actual detail, tell you what’s failing and why, and give you a written line-item quote backed by our 730-Day Done Right Promise. Built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.