Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Windows & Doors: The Miami Owner’s Guide
We install Atlas-compatible windows and doors across Miami, and the most common job we’re called for is a failed window or door unit being swapped out: a typical replacement window installation in Miami runs $5,310 – $17,700, while impact-rated window work runs $9,440 – $29,500, and most single-unit swaps are finished in a day. (We’re an independent service provider, not affiliated with Atlas.) Owners usually figure out something’s wrong the same way: a window that won’t latch shut before a storm, condensation fogging the glass on its own, a patio door that drags on the track after the rainy season, or water staining the drywall beside a frame that passed inspection two years ago. Miami’s salt air, humidity and hurricane code requirements make every one of those symptoms more urgent here than in most of the country.

Which Atlas Models This Applies To
Atlas builds window and door lines in vinyl, aluminum and impact-rated configurations, and the part you need depends entirely on which series you have. Start by finding the manufacturer label, usually stuck on the top or side of the sash or on the frame behind the head jamb. Write down the model and series numbers, the glass type (single-pane, insulated, or impact laminated), and the rough opening dimensions.
Here’s the compatibility gotcha that trips up most Miami homeowners: an Atlas impact-rated unit and a standard unit can share the same exterior dimensions but use completely different glazing, frame reinforcement and hardware. If you order replacement glass or hardware for the wrong configuration, it won’t pass Miami-Dade product approval and won’t hold up to a hurricane. Match the model number exactly, not just the opening size.
On the OEM-vs-aftermarket question, OEM parts guarantee the fit and rating; quality aftermarket equivalents can save money on standard hinges, locks and weatherstripping, but for impact-rated glazing and frames we recommend OEM every time so the unit keeps its approval.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Windows & Doors Is Failing
- Fogging or condensation inside the glass. A broken seal on insulated or impact glazing lets in moisture that no amount of wiping will fix; the unit needs replacement glass or a new sash.
- Sticky or misaligned latches and locks. Atlas multi-point hardware gets worn or the frame shifts in Miami’s heat, so the lock stops catching right before storm season.
- Water intrusion or staining around the frame. Failed weatherstripping and caulk open the door to wind-driven rain; in Miami this shows up fast and can rot the surrounding wall if left.
- A patio or entry door that drags on the track. Rollers and hinges wear down, and the door sags enough that it won’t close flush, defeating the seal.
- Hairline cracks or chips in impact glass. Any damage to laminated safety glazing is a security issue and a code concern, and it won’t pass an inspection in Miami-Dade.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Miami, a standard replacement window installation runs $5,310 – $17,700, and impact window installation runs $9,440 – $29,500, depending on unit size, glass type and whether the frame has to be reworked. That range covers the part, labor, sealant, flashings and clean-up. We give you an upfront, line-item number before work starts: the price you see is the price you pay, and every install is backed by our 730-Day Done Right Promise.
What pushes the number up: impact-rated glazing, oversized or odd-shaped units, and any rot or structural repair found behind the frame. What holds it steady: straightforward swaps where the existing opening and frame are sound. We confirm which one you’re facing at the free estimate.
DIY or Call Us?
You can safely check a few things yourself: open and close each unit to spot drag or misalignment, look for fogging between the panes, feel for drafts at the edges, and check the label for your model number before you call. That saves time and gets you an accurate quote faster.
Where DIY goes wrong is glazing and frame work. Impact-rated glass is heavy, expensive and easy to break during a swap, and a window or door that isn’t seated and flashed correctly will leak in the first Miami downpour. Storm-rated hardware also has to match the unit’s approval, and a loose unit can fail a wind-load test. For anything beyond tightening a hinge, call us at (833) 968-1198 and we’ll tell you honestly what your Atlas unit needs.
FAQs
Most Atlas units run 20 – 25 years in a moderate climate, but Miami’s salt air, humidity and intense sun shorten the hardware and weatherstripping life to roughly 10 – 15 years, and glazing seals can fail sooner on the west-facing side of a home.
Sometimes. Fogged insulated glass or a single broken sash can often be reglazed for less than a full unit swap, but a cracked impact pane or a warped frame usually means full replacement. We’ll tell you which at the free estimate – call (833) 968-1198.
Most single-unit replacements are completed in a day, and a set of windows is usually done in one to three days depending on count and any frame repair. We confirm the timeline in writing before we start.
We match the label’s model and series number to the exact OEM hardware or glazing, so the unit keeps its Miami-Dade product approval; for standard hardware we can quote a quality aftermarket equivalent to save money. Either way, the part and the labor are covered by our written workmanship guarantee.
If your Atlas window or door is failing, don’t wait for the next storm to find out. Call Groundwork Construction Co. of Miami at (833) 968-1198 for a free estimate, and we’ll confirm the part, price it honestly, and schedule the install. We also handle KraftMaid, Cambria and Silestone for the rest of your home.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.