Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Windows & Doors: The Miami Owner’s Guide
We install, repair, and replace Tamko-compatible windows and doors across Miami, and a full window replacement generally runs $5,310 to $17,700, while impact-rated installation runs $9,440 to $29,500 depending on opening count, glass package, and product line. We don’t promise same-day swaps on planned window and door work because every opening has to be measured, permitted, and ordered to match your Tamko profile and frame; what we do promise is a written line-item quote before any work starts. Most Miami owners discover a problem the same way: a window that suddenly won’t latch before a storm, a patio door dragging on its track, or fog between the panes after a summer of humidity. That’s usually the point where they start hunting for a specific part and land here.

Key Takeaways
- Tamko windows and doors fail from heat, salt air, and hurricane-cycle stress before they fail from age.
- We’re an independent installer, not affiliated with Tamko, and we match parts to your actual model and measurements.
- Impact window installation in Miami runs $9,440 to $29,500; standard replacement runs $5,310 to $17,700.
- Every project is backed by our 730-Day Done Right Promise and upfront pricing with no surprises.
Which Tamko Models This Applies To
Tamko’s window and door line is broad enough that guessing gets expensive. The company built its reputation on roofing and waterproofing before expanding into window and door products, and the residential lines most Miami homes carry fall into vinyl new-construction and replacement frames, plus sliding glass and hinged patio doors. Before we order anything, we find the manufacturer’s label – usually on the head jamb of the frame or the edge of the operable sash – and we pull the series name, size code, glass designation, and any impact rating printed there. A tape measure alone tells you the rough opening; it doesn’t tell you the sill height, the weatherstrip profile, or whether the unit is a dedicated impact assembly.
That distinction matters in Miami. A window rated for impact service is built around laminated or laminated-plus-polycarbonate glass and a reinforced frame and hardware set. Swap in a non-rated sash or a hardware kit meant for a standard unit and you’ve quietly dropped the opening below code for the wind zone, which can complicate insurance and inspection. On the OEM-versus-aftermarket question, our rule is simple: match the OEM spec on anything structural or impact-rated, and use a quality aftermarket equivalent only where fit and rating are genuinely identical. On older Tamko units where the exact replacement sash is no longer produced, we source a rated equivalent and document the substitution in writing so you have a paper trail.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Windows & Doors Is Failing
- Fogging or condensation sealed inside the glass. That’s a failed insulated glass seal, not a cleaning problem. Once the desiccant is saturated, the unit can’t recover and the only fix is glass replacement.
- A sash that won’t stay up, or a door that drags. Worn balances, rollers, or hinges lose tension over time. In Miami, constant humidity swells wood and corrodes steel hardware faster than dry climates do.
- Water staining at the interior sill or drywall below. This usually points to failed weatherstrip, a clogged weep system, or sealant that’s cracked after years of sun. Find it early and it’s a repair; ignore it and it becomes rot.
- Drafts or daylight visible around the frame. Air infiltration means the weather seal or glazing gasket has given up. It shows up on your power bill before it shows up on your wall.
- Hard-to-turn locks, or a latch that no longer lines up. Hardware misalignment often follows frame movement or settling. On impact-rated units, a lock that won’t fully engage is a real safety gap, not a nuisance.
Replacement Cost & What’s Included
For Miami, window replacement typically runs $5,310 to $17,700, and impact window installation runs $9,440 to $29,500. What pushes you toward the top of a range: larger openings, second-story access, impact-rated glass, custom sizes, and door units rather than windows. What keeps you near the bottom: standard sizes, single-story access, and a straightforward swap into a sound frame.
Our quotes are line-item and upfront – the number you see is the number you pay. That means the product, the hardware and weatherstrip, removal and disposal of the old unit, sealant and flashing, and the labor to set and finish it, all spelled out. Permits are pulled where Miami requires them, and inspections are passed before we call the job done. Every install carries our 730-Day Done Right Promise: if it’s not done right, we make it right. On a $10,000-plus project, $1,000 off applies, and 0% financing for 18 months spreads the rest out.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things you can check safely on your own. Look for the manufacturer label and write down the series and size code. Test every lock and latch by hand. Run a hose at low pressure against the outside of the frame and watch the interior sill for a few minutes. Clean the weep holes at the bottom of the frame with a soft brush. Those steps cost nothing and give us real information.

Where DIY goes wrong on windows and doors is the part that involves lifting glass, releasing tensioned hardware, or re-flashing an opening. A mis-set sash or a poorly flashed frame doesn’t fail the day you install it. It fails two summers later, when water has already gotten behind the drywall. And on an upper-floor opening, a dropped sash is a serious injury risk – that’s a job for trained hands with the right equipment. Our technicians have up to 12 years of experience, are background-checked, and arrive in uniform. Call (833) 968-1198 for a free estimate and we’ll tell you honestly whether you’re looking at a part swap or a full unit.
FAQs
A well-installed Tamko window or door typically gives 15 to 25 years in Miami, but the coastal climate shortens that window. Salt air corrodes hardware and sun degrades sealant faster here than inland, so we often see hardware and weather seals fail years before the frame or glass does – which is why we check those first. Call (833) 968-1198 for an exact quote – estimates are free.
Often, yes. A failed balance, roller, hinge, or weatherstrip on a Tamko unit can usually be repaired without touching the frame, and that’s the cheaper way out when the glass and frame are still sound. Once the insulated glass seal has failed or the frame is cracked, replacement becomes the honest answer. We’ll tell you which one you’re facing. Call (833) 968-1198 for a free estimate.
Most single-window swaps are completed in a single visit, and a whole-home job is scheduled in stages so your home stays sealed between visits. Impact-rated units and custom sizes can add lead time for the product itself, which we confirm in the written quote before you commit. Call (833) 968-1198 to schedule your free estimate.
We identify your unit from the manufacturer label and field measurements, match the OEM spec where the part is structural or impact-rated, and document any rated equivalent we substitute. We don’t claim to stock Tamko parts or carry them on a truck – we source to your specific unit. Call (833) 968-1198 for an exact quote – estimates are free.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.
Get Your Free Estimate
Whether you’re in Coral Gables, Kendall, or Miami Beach, a failed window or door only gets more expensive the longer it waits. Call (833) 968-1198 for a free project estimate and design consult, and a live person will answer – 24 hours a day, 7 days a week, no voicemail. We’ll pull the Tamko specs, walk the openings with you, and put a fixed, upfront number in writing. From foundation to finish line, built to last, backed in writing.