A Groundwork company - serving Miami, FL

Boral Windows & Doors in Miami, FL

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Windows & Doors: The Miami Owner’s Guide

We install and service Boral windows and doors across Miami, and most replacement jobs land between $5,310 and $17,700 installed for standard window replacement, while full impact-rated installations run $9,440 to $29,500. If a Boral unit in your home has stopped sealing, stopped sliding, or started fogging between the panes, the fix is usually a specific part rather than the whole unit. Most of these jobs are done in a single visit once we’ve matched the part to your exact model.

Two professional roofers removing old shingles into a disposal dumpster in Miami, FL

Call (833) 968-1198

Miami owners usually find the problem the same way. A door starts dragging on the sill during the wet season, a crank handle spins without moving the sash, or you notice condensation trapped inside a sealed glass unit after a storm. That’s the moment this page is built for: you know which window or door is failing, and you need the part matched correctly, priced honestly, and installed without a second trip.

Key Takeaways

  • Boral windows and doors use model-specific hardware; the part has to match the series and size, not just the brand.
  • Installed replacement pricing in Miami runs $5,310 – $17,700 for standard units and $9,440 – $29,500 for impact-rated windows.
  • Salt air, humidity, and storm-season wind load are the three things that wear Boral hardware out fastest in South Florida.
  • Groundwork Construction Co. of Miami is an independent service provider and is not affiliated with Boral.
  • Every installation carries our 730-Day Done Right Promise, with upfront pricing and no surprises.

Which Boral Models This Applies To

Boral makes windows and doors across several product families, and the hardware isn’t interchangeable between them. Before we order anything, we identify your exact unit three ways: the manufacturer label etched or stamped on the glass or frame, the model and series number on the sash edge or sill, and physical measurements of the frame, sash, and hardware mounting holes. A rollers-and-track assembly for one series won’t seat in another because the track depth and roller diameter differ by fractions of an inch. That’s the compatibility gotcha that sends a lot of Miami homeowners back to the store with the wrong part.

For Boral specifically, the OEM-versus-aftermarket decision matters less than fit. High-quality aftermarket hardware made to Boral’s spec can work well for rollers, weatherstripping, and screen frames. Where we lean OEM is on multi-point locking hardware, tilt-latch mechanisms, and any impact-rated unit, because the rating depends on the hardware meeting the tested assembly. When a wrong part compromises the impact rating, the unit is no longer compliant with Miami-Dade’s wind-load requirements, and that’s a problem at resale or insurance renewal. We source through Boral’s parts channel for those components and explain the aftermarket alternatives for the simpler parts so you can choose with real information. We don’t stock parts and we don’t carry them on a truck; we order the correct part for your unit.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Windows & Doors Is Failing

  • Door dragging or hard to slide: Worn rollers or a failed pivot hinge lose their tolerance over time, usually accelerated by humidity swelling the track. If the sash drags on one side, the roller or hinge is the culprit, not the frame.
  • Crank spins but the sash doesn’t move: The operator arm has stripped its internal gear or separated from the sash bracket. You’ll feel it turn freely with no resistance, which means the operator needs replacing.
  • Condensation or fog between the panes: The seal on the insulated glass unit has failed, letting humid Miami air inside. This isn’t a hardware problem; the glass unit itself needs replacing.
  • Drafts, water intrusion, or whistling wind: Weatherstripping, sweeps, or glazing gaskets have compressed or cracked. In Miami, UV exposure breaks down these seals faster than in cooler climates, often within 7 to 10 years on west-facing units.
  • Latch or lock won’t engage cleanly: The multi-point lock has fallen out of alignment with the strike, or the handle set has worn. This one affects security as well as function, so it’s worth fixing promptly.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for Boral-compatible window replacement in Miami runs $5,310 to $17,700, and impact-rated window installation runs $9,440 to $29,500. The range comes down to three things: whether you’re replacing a part or a whole unit, the size and number of units involved, and whether impact-rated glass is required. Single-part fixes like a roller assembly, operator, or weatherstripping sit at the low end because it’s labor and a small part. Full unit swaps with impact glass sit at the high end because the unit, the hardware, and the installation labor all factor in.

Our pricing is upfront and the number you see is the number you pay. We itemize the part and the labor so you can see what you’re buying, and every installation is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right. We’re honest about one thing: replacing hardware on a window or door is often a half-day job for one unit, but matching a discontinued Boral series can add a few days for sourcing. We tell you that upfront rather than surprise you later.

DIY or Call Us?

You can safely check a lot of this yourself. Verify the manufacturer label and model number, measure the frame and hardware, note whether the sash drags or the glass is fogged, and run your hand around the frame for drafts. That information helps us match the part on the first call. Where DIY goes wrong: removing a sealed impact-rated glass unit without proper support risks injury and voids the wind-load rating if it’s reinstalled wrong, and forcing a stuck multi-point lock can crack the frame or break the mechanism. Glass handling is the risk that matters most here, and we’d rather you let a trained technician handle anything involving the glass unit or the locking assembly.

If you’re not sure which side of the line your repair falls on, call us. We answer the phone with a live person 24 hours a day, and we’ll tell you honestly whether it’s a DIY check or a job for a technician. Call (833) 968-1198 for a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 968-1198
Local Service Coverage

Request a Free Estimate in Miami

Tell us what you need - Groundwork Construction Co. of Miami responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch