Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors: The Miami Owner’s Guide
We install and service PGT windows and doors across Miami, and installed pricing runs from about $5,310 to $17,700 for standard replacement glass and units, up to $9,440 to $29,500 for full impact-rated PGT installations – most jobs we handle in a single visit once the right part is matched. PGT is Florida’s best-known impact window and door manufacturer, and owners usually land on this page after a Miami storm, when a sliding glass door stops latching, a casement crank grinds to a halt, or a window fogs between the panes and they realize the sealed unit is gone. Groundwork Construction Co. of Miami is an independent service provider, not affiliated with PGT, and we work with the genuine and quality-equivalent parts that keep these units performing in Miami heat and hurricane season.

Which PGT Models This Applies To
PGT makes several lines, and knowing which one you have decides which part fits. The big series you’ll run into in Miami homes are WinGuard (impact-rated aluminum), PremierVue, and the aluminum and vinyl lines PGT has produced for decades. WinGuard dominates South Florida because it meets the Miami-Dade County impact code that most homes built or updated since the 1990s carry. The catch is this: WinGuard runs across multiple generations, and the rollers, latches, and balances changed between them, so a part off a newer door often will not fit an older PGT slider even though the frame looks identical.
To identify yours, look for the PGT label etched on the glass corner or the manufacturer’s sticker on the door jamb or window frame. That label carries the series name and a date code. If it’s gone, we measure the panel height, width, and thickness – PGT sliders use specific roller and track dimensions that don’t swap with generic aftermarket hardware. On the OEM decision: brand-new PGT parts give you a guaranteed fit and finish, while quality aftermarket equivalents cost less and work fine for high-wear pieces like rollers and weatherstripping, as long as they’re specified to your series. Glass and frame components we always match to the original spec.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Windows & Doors Is Failing
PGT units are built for Florida, but the heat, humidity, and salt air in Miami find the weak points. Here’s what owners report when a part is giving out:
- Fogging or condensation between the panes. The insulated glass unit’s seal has failed, letting moisture in. Once that happens the glass has to be replaced – it won’t clear on its own, no matter how good the window was when it was installed.
- The sliding door is hard to open or drags on the track. Usually worn rollers or a track packed with sand and grit. Rollers are the highest-wear part on any PGT slider, and in Miami the constant opening and closing to catch a breeze wears them down faster than you’d expect.
- The latch, handle, or lock won’t engage. A latch that stops catching is a security problem first and an inconvenience second. Often the strike or the latch mechanism itself has worn or shifted out of alignment.
- A casement or awning won’t stay open, or the crank grinds. These use a crank operator and a window balance, and both wear out. A balance that’s lost tension makes the sash slam down or refuse to hold.
- Water intrusion at the frame or leaking during storms. Failed weatherstripping, a bad seal, or a shifted panel lets Miami’s driving rain in. This one gets worse fast, so it’s worth a look before hurricane season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Miami, replacing the failed part on a PGT window or door generally breaks down like this, installed:
- Sealed glass unit replacement (fogged window): $5,310 to $17,700 for standard replacement; $9,440 to $29,500 for full impact-rated PGT installation.
- Sliding door rollers, tracks, and hardware: typically at the low end of these ranges, and often the most economical fix on the page.
- Latch, lock, or handle replacement: a smaller line item within the same range.
- Casement operator and balance: hardware-level repair, priced by the part matched to your series.
The range moves with the part, the series, and whether we’re swapping glass only or a full impact-rated unit. You get upfront pricing – the number we quote is the number you pay, no mid-job surprises – and the work is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. We source parts to your series spec, not a one-size-fits-all generic.
DIY or Call Us?
Some of this you can safely check yourself. Look at the glass label to find your PGT series. Wipe and vacuum the slider track. A stuck latch is sometimes just alignment. But here’s where DIY goes wrong: replacing rollers on a heavy impact-rated sliding door means lifting and reseating a panel that weighs far more than a standard door, and a dropped impact panel can crack the glass or hurt someone. Setting a sealed glass unit requires it to sit flush and airtight – a poor seal just means it fogs again in a year and lets Miami rain in. Ladders, sharp glass, sharp aluminum, and a hurricane-rated assembly that has to close right when the wind picks up are not a solo afternoon project.
For anything beyond a wiped track or a tightened screw, call us at (833) 968-1198. Our technicians have up to 12 years of experience with impact windows and doors, they’re background-checked and arrive in uniform, and most single-part swaps we finish in one visit. A live person answers the phone around the clock.
FAQs
Most PGT window and door frames last well over a decade, but the wear parts – rollers, balances, weatherstripping, latches – are the first to go, often in the 5-to-10-year range under heavy use, and the sealed glass unit’s seal is what typically fails first in Miami’s heat and humidity. Call (833) 968-1198 and we’ll tell you whether you’re looking at a part swap or a larger repair; estimates are free.
Often yes – a roller, latch, balance, or operator can be swapped without replacing the whole window or door, which is why diagnosing the exact part matters. Fogged glass, though, can’t be repaired; the sealed unit itself has to be replaced. Call (833) 968-1198 for an exact quote on which path fits your PGT unit.
Most single-part replacements – rollers, latches, hardware, a casement operator – we complete in a single visit, while a full sealed glass unit or impact panel replacement takes longer and we’ll confirm the timeline when we see the unit. Call (833) 968-1198 to schedule and we’ll give you a straight answer on timing.
We match the part to your PGT series and date code from the glass label or jamb sticker, using genuine PGT components where fit and finish matter and quality aftermarket equivalents for high-wear pieces like rollers and weatherstripping. We don’t claim to carry parts on a truck – we source the right one for your unit. Call (833) 968-1198 for a free estimate.
Whether you’re dealing with a fogged impact window, a dragging slider, or a latch that won’t lock before storm season, Groundwork Construction Co. of Miami can get the right part in and set it to spec. We also work with KraftMaid, Cambria, and Silestone across our other trades, but PGT windows and doors are what we’re talking about here – and we’re ready to talk about yours. Call (833) 968-1198 for your free estimate, and reach a live person any hour of the day or night.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.