A Groundwork company - serving Miami, FL
T

Therma-Tru Windows & Doors in Miami, FL

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Windows & Doors: The Miami Owner’s Guide

We install and service Therma-Tru windows and doors across Miami. Most single-unit swaps run $5,310 – $17,700 for standard replacement, while full impact-rated Therma-Tru systems (required in much of Miami-Dade) fall in the $9,440 – $29,500 range, including removal, flashing, finishing, and permit handling where required. A healthy Therma-Tru door or window has a smooth, quiet, weather-tight feel. When it’s failing, most Miami owners notice it in one of three ways: a door that suddenly drags or won’t latch, glass that lets in water during a summer storm, or a multi-point lock that won’t engage squarely.

Roofing professional installing metal step flashing on a residential home roof in Miami, FL

Call (833) 968-1198

This page is for owners who already have a Therma-Tru product and a specific part or unit that’s failing. We’ll walk you through how to identify the right replacement, what dies first in Florida’s weather, and what a fair Miami price looks like. Groundwork Construction Co. of Miami is an independent service provider and is not affiliated with Therma-Tru.

Key Takeaways

  • Most Therma-Tru replacement work on a single unit is done in one visit; multi-point hardware swaps can take longer.
  • In Miami-Dade, most exterior Therma-Tru doors require impact-rated glass (NOA-approved) to pass inspection.
  • Hardware and weatherstrip swaps start in the low hundreds; full-system replacement starts around $5,310 and climbs to $29,500 for impact-entry systems.
  • Our team has up to 12 years of experience with Therma-Tru and comparable premium door brands.

Which Therma-Tru Models This Applies To

Therma-Tru builds entry doors under several lines (Fiber-Classic, Smooth-Star, and the premium Traditions/Signature series) plus the patio doors and many sidelight/transom combinations. The correct part depends on the door’s construction and age. Fiberglass and steel doors use different hinge and lock hardware; Smooth-Star doors typically run a 3-point multipoint lock, while Fiber-Classic can run either a single-point or a multi-point. Patio doors have their own rollers, tracks, and glazing assemblies.

Two ways to identify the right part before you buy:

  1. Find the Therma-Tru label. On most doors it’s a small sticker on the hinge side of the door slab or on the top edge of the door. It gives the model line, door slab size, and the hardware group. Photograph it before you call anyone.
  2. Measure, then measure again. Slab thickness (1¾” is standard for entry, but patio doors and pocket configurations vary) and the distance between hinge screws on the existing route matter as much as the model number. On older doors installed before 2010, hardware is often discontinued and needs to be swapped with a current equivalent.

OEM Therma-Tru parts are the safest match. Quality aftermarket hardware (Prime-Line, Endura, Hoppe) is common, cheaper, and reliable when sized correctly, but the fit can be off by a millimeter or two and that’s where a straight-line install goes wrong. If installing new windows to pair with your Therma-Tru doors, we also regularly install and service KraftMaid, Cambria, and Silestone cabinetry and surfaces in adjacent rooms, which is worth noting if you’re coordinating interior trim.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Windows & Doors Is Failing

Most of what we see in Miami comes from two pressures: heat and humidity on the sealer, and salt air on the hardware. Here are the five symptoms we hear most often.

  • Door drags or won’t latch in summer. Fiberglass slabs expand in the heat and the strike plate drifts out of alignment. This is the number one Miami symptom, and it’s usually adjustable with a hinge and strike fix rather than a new door.
  • Water inside or around the door during storms. Worn weatherstrip, threshold sweep, or corner seals let wind-driven rain in during hurricane season. Left alone, the door frame rots from the bottom up.
  • Multi-point lock will not engage or sticks. The locking mechanism or the handle/gear assembly is worn or misaligned. On a fiberglass Therma-Tru, this typically means replacing the lock body or the gear rack, not the whole door.
  • Foggy or condensation inside insulated glass. The factory seal on the sealed unit has failed. This affects the glass, not the door, and a glazing-only swap is often the right answer.
  • Sagging hinges or a hard-thud closing. Screws in the slab strip out or the hinge bindles wear out. On a 20-year-old door in Miami, hinge-and-screw replacement is one of the cheapest, highest-value fixes.

A failed door in Miami is not just a comfort issue. If it’s a rear or side entry with weather intrusion, that’s a security and water-damage risk, and it should be checked before the next storm.

Replacement Cost & What’s Included

Miami pricing for Therma-Tru replacements sits in the same range as any premium door brand, because most of the cost is the unit itself plus the labor to fit it cleanly into an existing opening. Standard window replacement runs $5,310 – $17,700. Full impact window installation of the type most Miami-Dade homes now require runs $9,440 – $29,500.

What drives the range: unit size (a 6’8″ single entry costs meaningfully less than a double door with sidelights), glass package (impact-rated vs standard), hardware (single-point vs multi-point lock), and frame condition (whether the existing rough opening is reusable or rotted). An impact-rated Therma-Tru entry with a multi-point lock installed cleanly will sit toward the top of the range; a standard-size window swap sits near the bottom.

Item Installed Range
Window replacement (standard) $5,310 – $17,700
Impact window installation $9,440 – $29,500
Entry door hardware swap (lock body, hinges, sweep) Priced within the window replacement range above; ask for a line-item quote
Full entry door or patio slider replacement Priced within the installation range for your unit type

Every quote from Groundwork Construction Co. of Miami is written, line-item, and includes removal, disposal, flashing, finish work, and permit handling where required. All work is covered by the 730-Day Done Right Promise. Therma-Tru-specific parts and units are sourced after confirming your model and size.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

There’s a real split here. Small hardware swaps on a single entry door, like tightening hinges, adjusting the strike plate, or replacing a worn threshold sweep, are within reach for most homeowners, and we’re happy to say so. But we recommend a trained, insured professional for anything involving the sealed glass unit, a multi-point lock body on a fiberglass door, or whole-door replacement. Impact-rated glazing in Miami-Dade has to meet code (NOA approval), an install that isn’t flashed correctly will leak within one hurricane season, and a misaligned multi-point lock can leave the door unable to open from the inside. If you’re weighing it, call (833) 968-1198 and we’ll tell you honestly whether it’s a hardware fix or a replacement.

FAQs

Schedule a Free Therma-Tru Estimate in Miami

Whether it’s a stuck multi-point lock, foggy glass, or a door that no longer closes squarely, we’d rather look at it than guess. Groundwork Construction Co. of Miami handles Therma-Tru windows and doors across the area with upfront pricing, background-checked technicians, and our 730-Day Done Right Promise on every job. Calls are answered by a live person, 24/7, and estimates are free. Call (833) 968-1198 today to schedule your free estimate.

Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 968-1198
Local Service Coverage

Request a Free Estimate in Miami

Tell us what you need - Groundwork Construction Co. of Miami responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch