Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Home Additions & ADU: The Miami Owner’s Guide
We build and install Barrette-compatible home additions and ADU packages in Miami, and the typical installed range runs $53,100 – $153,400 depending on square footage, whether the unit is attached or detached, and how much of the structure ties into your existing roofline. Owners usually find out something is wrong the same way: a hairline crack that keeps reopening along the addition’s tie-in wall, a door that stopped latching square, or a soft spot under the threshold after a wet season. The building part itself rarely announces failure. What fails is the interface, the flashing, the sealants, and the hardware that hold a new structure to an old one.

Which Barrette Models This Applies To
Barrette’s outdoor living and structure lines cover a wide field, from its aluminum and vinyl railing and fencing systems up through pergolas, pavilions, and outdoor structures, and those components are what most attached additions and detached ADUs lean on for code-compliant site work, privacy, and covered outdoor space. Identifying the right replacement part starts with the label, not a photo. Barrette stamps or prints model and series information on rails, posts, and connection hardware, and on fence and railing lines that label is often on the inside face of a post or the underside of a top rail. Measure the actual post face, rail profile, and hardware center-to-center spacing, because a rail that looks identical at arm’s length is often a different series with a milled profile that won’t accept the connector you have.
For the OEM or aftermarket call: Barrette-specific connectors, post caps, and mill-finish hardware are worth sourcing as OEM when the profile is proprietary, because a generic connector that “fits” can load the joint the wrong way. Fasteners, anchor bolts, and standard flashing are fine as quality equivalents, and we spec those against Miami-Dade product approval rather than against brand. Note plainly: Groundwork Construction Co. of Miami is an independent service provider and is not affiliated with Barrette. We source parts to your model, we don’t guess at them.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Home Additions & ADU Is Failing
- A recurring crack along the tie-in wall. The addition is moving at a slightly different rate than the original house, usually because the footing or the ledger connection isn’t carrying load the way it was designed to. Patching the crack without finding the movement just moves the problem to the next wet season.
- Doors and windows that no longer latch square. Racking in the frame, most often from a footing that was set shallow for Miami’s soil or a header that’s undersized for the opening. When a door starts binding in June and frees up in January, that’s movement, not hardware.
- Soft spots or staining at the wall base. Water is getting past the flashing at the roofline intersection or under the threshold, and it’s been doing it long enough to saturate the sheathing. South Florida’s afternoon storms find that leak in the first real summer.
- Rust streaks or pitting on Barrette rail and connector hardware. Salt air and humidity inland from Biscayne Bay shorten the life of fasteners dramatically compared to inland markets. It’s cosmetic until it isn’t, then it’s a structural connection that’s lost section.
- Pooling water against the addition’s foundation. Grade that was set flat instead of pitched away, which in Miami means standing water against the base of a wall for months at a time. That’s the leading cause of premature footing and stucco failure.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Miami homeowners, the honest numbers: a home addition runs $53,100 – $153,400 installed, an ADU build runs $106,200 – $259,600, and a garage conversion that turns existing space into living area runs $35,400 – $94,400. What drives you toward the top of a range is site work, engineering and permitting on a Miami-Dade lot, whether the unit is detached, and how much of the structure requires new electrical and plumbing. Parts-plus-labor is line-itemed; you see the connector, the flashing, the hardware, and the labor as separate lines instead of a lump sum.
Every project carries our 730-Day Done Right Promise – if it isn’t done right, we make it right. Pricing is upfront with no surprises, and we back it with $1,000 off projects over $10,000 plus 0% financing for 18 months.
DIY or Call Us?
You can safely check a handful of things: look for the post label, note whether cracking is vertical or diagonal, watch for daylight or stains at the tie-in, and confirm water runs away from the foundation rather than toward it. Where it goes wrong is at the structural connection. Moving a post, re-flashing a wall intersection, or shimming a footing to fix a crack requires engineering judgment, and guesswork there can compromise the load path on a structure people will sleep in. You’ll do a diagonal repair with a tube of sealant, it’ll hold three months, then the wet season finds it again.
Call (833) 968-1198 and we’ll schedule a free estimate and design consult. Calls are answered by a live person 24/7, and every technician on your job is background-checked and in uniform.
FAQs
Barrette’s aluminum and vinyl systems are engineered for decades, but the realistic service life in Miami depends on what it’s connected to. Salt air, humidity, and a wet season that runs nearly year-round accelerate hardware corrosion and sealant failure far faster than the material itself degrades, which is why fasteners and flashing need inspection every few years while the rail or panel is fine. Call (833) 968-1198 for an exact quote, and the estimate is free.
Often yes. A single failed connector, post cap, or section of flashing can be replaced without touching the structure, and a localized crack can sometimes be routed and repaired if the movement has stopped. We won’t promise a repair on a structural connection until we’ve confirmed the underlying cause. Call (833) 968-1198 and we’ll tell you honestly which side of that line you’re on.
A hardware or single-section swap is usually a single-visit job, and most of those run half a day to a full day. Rework that touches the tie-in wall, flashing, or a footing is scheduled as a proper job with a written scope, because rushing it is what causes the callback. Call (833) 968-1198 for a realistic timeline on your structure.
We identify your Barrette model from the labels and measurements on the structure first, then source the matching series part, comparing OEM against quality approved equivalents where the profile allows. For Miami-Dade, we verify product approval on every component that’s part of the structural or weather-resistive assembly. Call (833) 968-1198 – the estimate and design consult are free.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.