Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Windows & Doors: The Miami Owner’s Guide
We install Belgard-compatible windows and doors across Miami, and the honest answer most owners need first is this: a full window replacement here runs $5,310 – $17,700, while impact-rated window installation runs $9,440 – $29,500 depending on opening size, glass package, and how many units you’re replacing. Groundwork Construction Co. of Miami is an independent service provider and is not affiliated with Belgard; we source the right parts to match your existing units and install them to spec.

Owners usually discover the problem the same way. A bedroom window starts sticking in the afternoon heat, or a sliding door drags a half-inch off its track by summer. Then come the water stains on the interior sill after a hard rain, or the AC bill that climbs $40 – $60 a month with no explanation. In Miami, salt air and year-round humidity accelerate all of it. By the time a homeowner calls us, the seal is usually gone and the frame has already started to rot.
Which Belgard Models This Applies To
Belgard’s window and door line covers several series across vinyl, aluminum, and impact-rated frames, and parts are not interchangeable across them. The fastest way to identify what you have is to check three places: a manufacturer label on the top or side of the frame (usually behind the interior trim), the glass etching in the corner of the pane, and the rough opening measurements taken from inside the frame. A model number alone won’t tell us the part; the measurements and series code together do.
Here’s the compatibility gotcha most homeowners miss: the same nominal size across two Belgard series will not share weatherstripping, corner gaskets, or roller assemblies. A replacement sash from a different series can look identical on the shelf and still leak at the sill within a season. That’s why we measure and cross-reference the series code before we order, rather than matching by eyeball. When a Belgard part is discontinued or on a long lead time, a quality aftermarket equivalent is a legitimate option, and in South Florida’s climate an impact-rated equivalent is often the smarter long-term choice. We tell you which path we recommend and why before you approve anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Windows & Doors Is Failing
- Condensation between the panes. That fog means the sealed glass unit has failed and the inert gas is gone. It won’t clear on its own, and the insulation value drops immediately.
- The window won’t latch or seal flush. Usually a worn lock, a sagging sash, or a warped frame. In Miami humidity, a frame that swells and sticks by noon and frees up at night is a humidity problem, not a hardware problem.
- Water on the interior sill after rain. Failed weatherstripping or a clogged weep channel. Left alone, this is what rots the frame and the drywall below it within a couple of seasons.
- Sliding doors that drag, jump, or wobble. Worn rollers or a bent track. A door that’s off its track by more than a quarter inch is a security problem, not just a nuisance.
- Drafts and a climbing AC bill. Air infiltration around the sash or through a failed seal. This is the most expensive symptom to ignore in Miami, where cooling costs run year-round.
The lifespan reality here is shorter than national averages suggest. A standard non-impact window seal that would last 20 years in a dry climate commonly fails in 10 – 12 in coastal Miami because of UV exposure and salt air. If your windows are past that mark and starting to fog, plan for replacement rather than chasing repair after repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Pricing in Miami depends on glass package, opening count, and whether you’re matching existing openings or resizing them. These are installed ranges, parts and labor together, with no line-item surprises:
| Scope | Installed Range (Miami) |
|---|---|
| Window replacement (standard) | $5,310 – $17,700 |
| Impact window installation | $9,440 – $29,500 |
What moves the number: single unit versus whole-home, standard glass versus impact-rated (required in much of Miami-Dade), frame material, and whether we’re reframing a damaged opening. We give you a written line-item quote before any work begins, and the price you see is the price you pay. Labor is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. On jobs over $10,000 you can take $1,000 off, and we offer 0% financing for 18 months to spread the cost.
DIY or Call Us?
You can safely do a few things yourself: wipe down the tracks, clear the weep channels at the bottom of the frame, tighten visible hinge screws, and confirm the model label location so you have it ready when you call. That’s about where it stops being safe.
Window and door replacement on an upper floor is a two-person job with fall risk, and on impact-rated units the glass is heavy and the anchoring has to hit studs squarely – a self-installed unit that isn’t anchored right is a hazard in a Miami storm. Poor sealing is the other quiet failure: a window that looks fine but leaks at the sill costs you the frame and the wall around it. We handle the anchoring, sealing, and code-required impact ratings correctly. Call (833) 968-1198 to schedule your free estimate.
FAQs
Plan on 10 – 12 years for the sealed glass unit on non-impact windows in coastal Miami, and 20+ years on the frame itself if it’s maintained. UV and salt air shorten seal life more than the national averages suggest. Call (833) 968-1198 for an exact quote – estimates are free.
Often yes for hardware – rollers, locks, weatherstripping, and tracks are serviceable and far cheaper than a new unit. Once the sealed glass unit has fogged, though, the glass has to be replaced, not repaired. We’ll tell you honestly which one you’re dealing with.
A single window or door is a few hours; a full-home replacement typically runs one to three days depending on unit count and whether we’re matching existing openings. Most single-unit jobs are completed in a single visit. We confirm the schedule in your written quote.
We measure the opening, read the series code off the frame label, and cross-reference the correct part before ordering. When a Belgard part is discontinued or back-ordered, we present a quality aftermarket equivalent and let you approve it before we order. We don’t carry stock on hand and don’t claim to; we source the right match to your window. Call (833) 968-1198 for a free estimate.
If your Belgard windows or doors are fogging, sticking, or leaking, the fix starts with a phone call. Groundwork Construction Co. of Miami answers every call with a live person, 24/7, and we’ll send background-checked, uniformed technicians to take measurements and give you upfront pricing with no surprises. This is the same standard we hold across our window and door work and our full line of trusted brand partners – KraftMaid, Cambria, Silestone, and others – and every job is backed in writing by our 730-Day Done Right Promise. Call (833) 968-1198 to schedule your free estimate today.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.