Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Home Additions & ADU: The Miami Owner’s Guide
We build and install home additions and ADUs on Dvele structures in Miami, and for a feature of this scope, most owners come to us when they’re ready to price a real, permitted addition or a detached unit to back a Dvele home. Installed pricing in Miami runs from $53,100 to $153,400 for a home addition and $106,200 to $259,600 for a full ADU, and every bid we hand you is a written line-item quote with no change-order surprises. You typically discover you need this guide when your project has outgrown a sketch on the back of a napkin – the family’s grown, the home office won’t fit, or a Dvele delivery schedule means you need the addition dried in and inspected before the rest of the build moves forward.

Groundwork Construction Co. of Miami is an independent service provider. We are not affiliated with Dvele, we don’t manufacture, sell or stock Dvele parts, and no parts ride on our trucks. What we do is plan, permit and build the addition or ADU that attaches to or sits beside a Dvele structure, using the same measurements, connection details and load-path logic the Dvele system expects.
Key Takeaways
- Typical installed ranges in Miami: home addition $53,100 – $153,400; detached ADU $106,200 – $259,600; garage conversion $35,400 – $94,400.
- We’re an independent builder, not Dvele – we build compatible additions, we don’t source Dvele’s own components.
- Every project is covered by our 730-Day Done Right Promise, backed in writing.
- Permits get pulled and inspections passed – the single biggest reason an addition stalls is a skipped permit.
- Calls are answered by a live person, 24/7. No voicemail.
Which Dvele Models This Applies To
Dvele builds a range of prefab and panelized homes across several model lines and square footages, and the addition or ADU we design has to match what’s actually on your site – not a catalog name on a brochure. The first thing we do is read your Dvele plan set: structural drawings, wall-panel layout and the connection points the manufacturer intended. That drawing set is your compatibility key. A common gotcha in Miami is assuming your Dvele’s wall panel system, roof pitch and floor elevation will accept a standard stick-built addition without a designed tie-in. They often won’t, and a mismatched tie-in between a panelized Dvele wall and a block-and-frame addition is where moisture intrusion starts – precisely the wrong outcome in Miami’s humidity.
Here’s how to identify what you actually need:
- Pull your Dvele plan set. The title block and structural sheets name the model and any optional packages. That document outranks any part number you find stamped on a panel.
- Measure the tie-in zone. Note the exterior wall depth, floor-to-ceiling height and roof pitch. Those three dimensions drive the addition design more than any brand label.
- OEM vs. aftermarket for Dvele. For a builder-founded addition, we’re not buying Dvele components – we’re matching our construction to Dvele’s design intent. There’s no “Dvele-branded” brick or truss. The compatibility decision is about structural connection and drainage, and it’s made against the drawing set.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Home Additions & ADU Is Failing
When the addition (or the plan for one) goes wrong on a Miami property, it shows up in predictable ways. Here’s what we see:
- Joint separation at the tie-in. Cracks or daylight at the seam between the Dvele structure and the addition usually mean the two building systems settled differently. Dvele’s panelized walls and a conventional block addition move independently, and without a properly designed connection that gap is where problems begin.
- Roof leaks at the tie-in valley. Miami’s summer downpours expose any weak flashing detail. If you’re seeing water stains at the intersection within the first rainy season, the transition detail failed or was never built correctly.
- Permit red flags in your records. If your addition or ADU has an open or cancelled building permit in Miami-Dade records, that’s a red flag, not paperwork noise. Unpermitted additions are one of the most common and costly findings on Dvele properties we inspect.
- Wet slab or pooling at the new footprint. South Florida’s high water table and flat lots mean drainage from a new addition must be designed, not assumed. Standing water against the addition wall after any storm points to a grading or foundation elevation error.
- Growing cracks in finished drywall. Interior cracks radiating from a new-construction wall often trace to foundation or framing issues the original plan under-built for. In a Miami home, they’re worth diagnosing early rather than patching twice.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing depends on the scope: a home addition in Miami typically runs $53,100 – $153,400, a detached ADU $106,200 – $259,600, and a garage conversion $35,400 – $94,400. What drives the range is size, foundation type, tie-in complexity, materials and permitting. We show up front what you’ll get:
- Home Addition: $53,100 – $153,400 installed.
- ADU Construction: $106,200 – $259,600 installed.
- Garage Conversion: $35,400 – $94,400 installed.
Every quote is line-item, so you see what’s labor, what’s materials and what’s permit costs. The number you see is the number you pay – no change-order surprises. All workmanship is covered by our 730-Day Done Right Promise, whether it’s an addition or a kitchen remodel built with KraftMaid or Cambria.
DIY or Call Us?
A home addition is not a parts swap. There’s no safe DIY path when you’re tying a new structure into a Dvele’s load path, designing drainage on South Florida’s high water table, and pulling a building permit that gets inspected. This is genuine structural and life-safety work, not a weekend project. What an owner can do: gather your Dvele plan set, check your permit history, and note where you see cracking, leaks or pooling. That record helps us diagnose fast. When the scope goes beyond a patch, call us – Groundwork Construction Co. of Miami is licensed independent of Dvele and every job comes with the 730-Day Done Right Promise.
FAQs
A properly built, permitted and drainage-designed addition on a Dvele structure should last as long as the home – decades – provided the tie-in and roof details hold up to Miami’s hurricanes and humidity. Most of the durability risk sits in the connection and drainage design, not the materials themselves. Call (833) 968-1198 for an exact scope.
Often yes. Minor joint separation or a roof tie-in leak can sometimes be repaired rather than rebuilt, but it depends on what the inspection finds. Call (833) 968-1198 and we’ll tell you honestly whether a repair or a new build is the right call.
A home addition typically runs several months, and a full ADU takes longer, including design, permits and Miami-Dade inspections. We give you a written schedule at the start, not a verbal guess. Call (833) 968-1198 for a timeline for your project.
We source construction materials and components for the addition ourselves – we do not touch Dvele’s own parts or represent that we do. We match our build to your Dvele design intent, and we pull from trusted brand partners across the trades. Call (833) 968-1198 to talk through materials.
Ready to price your Dvele addition or ADU in Miami? Call Groundwork Construction Co. of Miami at (833) 968-1198 for a free project estimate and design consult. Live person, 24/7. Every project covered by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.