Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Bathroom Remodeling: The Miami Owner’s Guide
A Mighty Buildings bathroom remodeling project in Miami typically runs $10,620 to $33,040 installed, depending on the panel condition, fixture package, and whether tile and waterproofing need replacement. We work on Mighty Buildings homes across Miami and can usually get an assessment scheduled within days, with most straightforward bathroom swaps completed in one to three site visits. Owners usually find out something’s wrong when a shower pan starts flexing underfoot, when caulk lines at the panel seams keep reopening after every re-caulk, or when a vanity cabinet pulls away from the wall because the anchor points never got backing in the factory panel. That’s the moment the calls start, and it’s the moment you want a contractor who’s actually touched this construction system.

Which Mighty Buildings Models This Applies To
Mighty Buildings builds its units around a 3D-printed or panelized shell, and the bathroom assemblies inside those shells don’t follow the same dimensional rules as a stick-built Miami home. The interior wall studs often sit on non-standard centers, the tub and shower surrounds are set into recesses sized to the factory module, and the drain rough-in, supply stub-outs, and vent stack positions are locked to that specific floor plan. Before we quote anything, we pull the model designation off the data plate inside the unit or from the as-built drawings if you have them, then take actual field measurements of the wet wall. That’s how we match the right shower pan, the right vanity width, and the right trim kit instead of ordering a stock piece and hoping it lands.
For most Mighty Buildings retrofit work, OEM-matched panels and surrounds are worth the premium on anything that has to seal against the shell geometry, while fixtures like the faucet, toilet, and vanity are fine as quality aftermarket equivalents because they aren’t tied to the module dimensions. If a factory part is discontinued, we don’t force a fit. We measure, fabricate, and document what we did. And to be clear on who we are: Groundwork Construction Co. of Miami is an independent service provider, not affiliated with Mighty Buildings. We also work with KraftMaid, Cambria, and Silestone on finish selections for these bathrooms.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Bathroom Remodeling Is Failing
Mighty Buildings bathrooms fail in predictable ways, and most of them trace back to how water moves through a panelized shell in Miami’s humidity.
- Shower pan flex or soft spots underfoot. The pan substrate has lost adhesion or moisture has gotten beneath the membrane, and every step pushes water further into the framing.
- Caulk lines at panel seams reopening within weeks. The panels are moving against each other because the sealant lost bond to the substrate, not because you used the wrong caulk.
- Vanity cabinet separating from the wall. Factory backing wasn’t placed where the cabinet anchors landed, so the screws are holding into panel skin rather than structure.
- Musty smell that returns after cleaning. Water is trapped behind a surround or under the floor tile, and Miami’s year-round humidity keeps that cavity wet enough to grow mold.
- Peeling paint or bubbling drywall near the shower or tub. A slow leak at a supply line or drain connection is wicking into the panel edge and showing up on the finish side.
Replacement Cost & What’s Included
Bathroom remodeling on a Mighty Buildings home in Miami runs $10,620 to $33,040 for a full remodel, and a small bathroom remodel lands in the $5,900 to $14,160 range. A walk-in shower installation is $5,310 to $14,160, a tub-to-shower conversion is $4,130 to $11,800, a shower replacement alone is $3,540 to $10,030, and a vanity installation is $945 to $3,540. What drives the number up: tile and waterproofing replacement, non-standard panel dimensions requiring custom trim, and any hidden water damage in the floor or wall cavity. What drives it down: reusing existing fixtures, keeping the layout, and catching a slow leak before it spreads.
You get a written line-item quote before we start, upfront pricing with no change orders hidden in the fine print, and the work backed by our 730-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check the obvious things yourself: look for soft spots in the shower pan, press on the vanity cabinet to see if it moves, inspect caulk joints at panel seams, and note any musty smell that persists after cleaning. Anything past that is where DIY on a Mighty Buildings bathroom goes sideways. Cutting into a shower pan or a panelized wet wall without knowing where the waterproofing membrane and the structural backing sit means you’re one wrong cut away from opening a cavity you can’t close, and if a supply line is involved, you’re adding water damage to the bill. There’s no electrical or gas risk in most of these jobs, but the water and moisture damage from a botched attempt can run into the thousands. Call (833) 968-1198 and we’ll tell you honestly whether it’s a repair or a replacement.
FAQs
Factory panels and surrounds hold up well, but the wet-side components – the shower pan membrane, the caulk joints, the drain seal – typically show wear in 8 to 15 years in Miami’s climate because of the constant humidity and heavy daily shower use. Latex-sealed panels move more in Miami than in dry climates, so joint maintenance matters more here. Call (833) 968-1198 for an assessment if yours is past that window.
Sometimes, yes. A single failed caulk line, a loose vanity anchor, or a leaking faucet cartridge is a repair, not a remodel. Once water has gotten behind a panel or into a shower pan substrate, it’s a replacement. We tell you which one it is after we look. Call (833) 968-1198 for a free estimate and we’ll walk you through what we find.
A vanity or fixture swap is usually one day. A shower replacement or tub-to-shower conversion typically takes 2 to 4 working days, and a full remodel on a Mighty Buildings home runs 1 to 3 weeks depending on whether the panel dimensions require custom trim fabrication. Call (833) 968-1198 and we’ll give you a realistic schedule for your model.
We start from the model designation on your unit’s data plate or as-built drawings, take field measurements of the wet wall and opening, then source OEM parts where the factory geometry matters and quality aftermarket equivalents where it doesn’t. Original match matters most on panel seams and shower surrounds; anything that doesn’t seal against the shell can be standard. Call (833) 968-1198 to schedule a free estimate and we’ll document every part we specify.
Schedule Your Mighty Buildings Bathroom Estimate in Miami
If your Mighty Buildings bathroom is leaking, flexing, or just worn out, call Groundwork Construction Co. of Miami at (833) 968-1198 for a free estimate. We answer with a live person – 24/7, no voicemail – and we’ll tell you exactly what needs to happen. Every project is backed by our 730-Day Done Right Promise. The number you see is the number you pay.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.