







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Gladeview, FL: What It Costs and How Fast It Goes Up
A Chain Link Fence in Gladeview typically runs $3,500 to $9,000 for a standard residential lot, and most jobs are finished in one to three days once materials land on site. The fence itself is the easy part. The harder part in the 33147 ZIP is getting an inspected, wind-rated install that holds up through June to November. Call (833) 968-1198 and we’ll walk your property line and give you a written, line-item number before anything gets ordered.
How a Chain Link Fence Goes In, Stage by Stage

We don’t hand you a vague timeline. Here’s the actual sequence, what happens when, and where you have to make a call.
- Stage 1 – Walk and mark (day 1, about an hour). We pace the line, flag the corners and gates, and check for the buried stuff that ruins a post hole: irrigation, the septic field tie-in, cable, and the concrete from an old carport pad. You decide the fence line here, not later. Moving it six feet after the holes are dug means paying for holes that never get used.
- Stage 2 – Utility locate and permit filing (day 1-3). In Gladeview, a fence over six feet, or any fence on a corner lot within the sight triangle, usually means a Miami-Dade County permit. We file it, and we wait on the free 811 locate so nobody drives a dig bar through a gas line. You sign off on the permit scope. We don’t start digging until the marks are clear.
- Stage 3 – Demo and setting posts (day 1-2, 4 to 7 hours of work). Old fence and concrete footings come out, then we set galvanized posts in concrete and let them cure. Corner and gate posts get extra concrete and a thicker wall. That’s not upselling – a gatepost taking a hard shove from a lawn crew is where cheap fences fail first.
- Stage 4 – Rails, fabric, and tension (day 2-3). Top rail, bottom tension wire or rail, then the fabric gets stretched and tied. This is the stage you can watch and judge. The fabric should be tight enough that it doesn’t flap in a stiff afternoon gust off the Everglades. Gates get hung and adjusted so they latch with two fingers.
- Stage 5 – Inspection and walkthrough (final day). If the permit calls for an inspection, we meet the county inspector. Then we walk the finished fence with you, check the gate swing, and hand over the 730-Day Done Right Promise in writing. If something isn’t right, we make it right.
Our technicians have up to 12 years of experience, and every one of them arrives background-checked and in uniform. No mystery crews on your property. That’s the whole point of hiring a real contractor instead of a guy with a truck and a clipboard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’re Actually Choosing Between
Chain link is a category, not one product. Here’s what the choices really mean, and who each one suits.
- Gauge of the wire (11.5 vs. 12.5 gauge). The 11.5-gauge fabric is noticeably heavier and costs more. It’s the right call for a privacy screen, heavy wind exposure, or dogs that lean on the fence. The 12.5-gauge is lighter and cheaper, fine for a light-use residential line.
- Coating: galvanized vs. vinyl-clad. Bare galvanized steel is the budget choice and it lasts, but the raw silver finish is what most Gladeview homeowners want to hide behind a hedge. Vinyl-clad (typically in green or black) costs more per linear foot, looks cleaner against the house, and adds a layer of corrosion protection against the salt and humidity that eat bare metal here.
- Post and rail weight. Schedule 20 pipe is the standard weight; Schedule 40 is thicker-walled and better for a tall fence, a wide gate span, or a windy corner. Ask which one is in the quote – it’s a common place to shave cost.
- Height. Four feet is the typical residential line. Five and six feet mean more material, more concrete, and often a permit. Decide the height before the quote, because changing it after the fact means re-buying posts.
- Gates and hardware. A drive gate and a walk gate add real money and real stress to the frame. Self-closing hinges, a proper latch, and a concrete footer sized for the gate weight matter more than the finish.
- Wind-rated hardware and bracing. On exposed runs, corner and end bracing and rated tension bands cost a bit more now and save you a bent frame after a storm. This is where we don’t cut corners.
If the fence is part of a bigger yard project, homeowners often pair it with a rebuilt pad or apron – a natural hook into our Concrete Driveways & Concrete Work in Gladeview work, and into Asphalt Driveways & Resurfacing in Gladeview when the driveway needs resurfacing at the same time.
What a Chain Link Fence Costs in Gladeview, FL

For a typical residential lot in 33147, a Chain Link Fence lands between $3,500 and $9,000. That’s the honest range for this market, and a written estimate tells you where in it you actually fall. A short run with no demo sits near the bottom. A long perimeter with a new drive gate, full demo of an old fence, and a permit drives it toward the top.
The five things that move the number
- Linear feet and corners. More fence, more posts, more concrete. Every corner and end point requires bracing, so a jagged lot line costs more than a straight one.
- Existing condition. Tearing out old chain link is faster than pulling out an old wood or block wall with buried footings. If a concrete pad or footings have to be broken, that’s a demo line item.
- Gates. A drive gate is the single biggest add. It needs a heavier frame, a deeper footer, and more hardware than a walk gate.
- Material grade. Vinyl-clad, heavier gauge, and Schedule 40 all push the price up. Ask which spec is in the quote so you’re comparing like with like.
- Permit scope. A simple permit for a standard-height line is modest. A taller fence or one near the sight triangle may trigger more review and a county inspection.
What’s in the written estimate
Demo, posts, rails, fabric, tension wire, gate hardware, concrete, and the permit filing. Upfront pricing, no surprises – the number you see is the number you pay. What’s sometimes extra and always quoted separately: a new drive gate, vinyl privacy slats, and any concrete pad repair that pops up once the posts are out. We put those in writing so nobody discovers a charge halfway through.
See the difference
Before
After
Before
After
Before
AfterWhat Gladeview Homes Specifically Do to This Job
Gladeview is an unincorporated pocket of Miami-Dade around NW 79th St and the 33147 ZIP, and that matters for a fence. There’s no city hall to walk into, so every permit, inspection, and code question runs through the county. Miami-Dade’s High-Velocity Hurricane Zone rules are strict about wind-borne-debris-rated products and product approval (NOA), and those rules don’t stop at the front door – they reach into structural attachments and anything that has to survive a storm.
The housing stock compounds it. Much of this neighborhood is mid-century masonry – 1940s to 1960s concrete-block and terrazzo homes, many expanded over decades with room additions and converted carports. That legacy of informal work means we do a real pre-install survey before we set a post. Older properties here often carry unpermitted structures, and a fence line drawn blind can run straight through a hidden footing or a rear addition. On a fence job we also watch for existing fence lines that were never actually set in concrete – a common find near these old homes – because that’s why they lean after a wet summer.
The climate does the rest. Subtropical humidity, intense UV, and the June to November storm season punish anything with a weak frame. So we spec heavier posts, rated bracing, and corrosion protection, and we set concrete footings deep enough to hold through a heavy downpour. If the fence is part of a larger yard rebuild, homeowners often pair it with our Fence Installation in Gladeview work for the full perimeter scope. And if you want to see everything we cover in the area, start at our Gladeview service page. For the services behind it, our Fence Installation hub has the full picture. We’re glad to walk the line and tell you exactly what you’re working with.
Serving Gladeview, FL – Our Local Coverage Area
We serve Gladeview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Gladeview

A standard residential run is one to three days of install time on site, with the permit and utility locate adding a few days before work starts. The job is short; the prep is what takes patience. Call (833) 968-1198 and we’ll give you a firm date range with your estimate.
Often yes, especially for a taller fence or a corner lot, because all permitting here runs through Miami-Dade County rather than a local city office. We pull the permit and meet the inspector for you, so you’re not chasing paperwork. Call (833) 968-1198 to find out what your specific property needs.
Usually yes – a fence is a light structure that rarely requires any plumbing or structural work. The one exception is a hidden footing or a rear addition from the home’s unpermitted-expansion legacy, which we catch in the pre-install survey. Ask us to look at it before you commit, and we’ll tell you straight.
Most residential jobs here land between $3,500 and $9,000, depending on length, gauge, coating, gates, demo, and permit scope. The written quote itemizes each of those so the total makes sense. Call (833) 968-1198 for an exact quote – estimates are free.
Every install is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That’s a written workmanship guarantee, not a verbal handshake. Call (833) 968-1198 to go over what it covers.
Get a Free Chain Link Fence Estimate in Gladeview
Call (833) 968-1198 to schedule a free on-site estimate. We walk the line with you, check for buried utilities and old footings, and hand you a written, line-item quote – no vague ranges, no surprises. You’ll also hear about 0% financing for 18 months and $1,000 off projects over $10,000. A live person answers, day or night. Ready when you are.
Written by the team at Groundwork Construction Co.












