Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Miami Springs, FL: What It Costs and How Long It Takes
Walk-in showers & shower remodeling in Miami Springs typically runs $5,310 to $14,160, and most jobs move from demo to final glass in three to four weeks once materials are on site. A simple curbless shower with a prefab pan can be finished faster; a custom mortar-bed shower with a bench and frameless glass sits at the top of that range. Call (833) 968-1198 for a free on-site estimate and a written line-item quote before anything gets torn out.
How a Walk-In Shower Comes Together, Stage by Stage
We don’t hand you a “we handle everything” promise and disappear. Here’s the actual sequence, what gets decided when, and roughly how long each part takes.
Stage 1: Measure, moisture check, and layout (day 1)
We measure the existing shower or tub alcove, check the subfloor and the wall behind the tile, and look for the soft spots that show up in older Miami Springs homes. You decide the footprint here: curbless or 4-inch curb, linear drain or center drain, bench or no bench. This visit is where we flag anything that could push the price, before demolition starts.
Stage 2: Demo and rough-in (days 2 – 4)
Out comes the old tile, the pan, and whatever’s hiding behind the wall. If the drain needs to move or the valve is being relocated, that plumbing happens now, and the rough plumbing gets inspected before anything closes back up. Our technicians have up to 12 years of experience on this exact stage, and it’s the one that decides whether the rest of the job goes smoothly.
Stage 3: Waterproofing and pan build (days 4 – 6)
This is the stage that separates a shower that lasts from one that leaks in five years. We build the sloped mortar bed, apply a bonded waterproofing membrane to the walls and floor, and get the pan flood-tested where the local inspection requires it. The moisture that ruins showers in this climate starts here if it’s rushed.
Stage 4: Tile, trim, and fixtures (days 6 – 12)
You’ve already picked tile, grout, and finish by now, so this stage runs on schedule. Wall tile, floor tile, niche, bench top, and the shower valve trim all go in. Grout and sealant cure for a couple of days before the glass is measured, so plan on a short pause here.
Stage 5: Glass, final inspection, walkthrough (days 12 – 21)
Tempered glass is templated after tile is set, fabricated, and installed, usually a week to ten days out. Then the final inspection and a walkthrough where we test the drain, check the door swing, and hand you the care sheet. Most Miami Springs jobs land inside a month; specialty glass and imported tile are the two things that stretch it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decisions on this job come down to five or six trades, and each one has a real cost and a real trade-off.
- Shower pan: a prefab acrylic or fiberglass pan runs cheaper and installs fast, but it flexes over time and limits your tile patterns. A custom mortar bed with a waterproof membrane costs more and lasts decades. It’s the better call for a curbless design.
- Waterproofing system: a bonded sheet membrane or a liquid-applied coating over cement board. Both work; the membrane is more forgiving in a wet-room build, the liquid system is faster. Either way, it’s not a place to cut corners.
- Wall tile: porcelain and ceramic are the practical workhorses here, and they handle Miami-Dade humidity without complaint. Large-format slabs mean fewer grout lines to scrub; smaller mosaic is easier around a niche and bench.
- Glass: frameless 3/8-inch tempered glass gives you the cleanest look and the highest price. A semi-frameless door with a fixed panel trims the cost without cheapening the room.
- Fixtures and valve: a thermostatic valve with a rain head and hand shower runs more than a standard pressure-balance valve, but it’s the upgrade most homeowners notice every morning.
Kohler is a fixture line we work with often on these builds, and it pairs well with a custom tile shower. Budget-grade fixtures are where most people regret a shortcut later; the valve behind the wall is hard to swap.
What Walk-In Showers & Shower Remodeling Costs in Miami Springs, FL
Plan on $5,310 to $14,160 for a walk-in shower build in Miami Springs. A straight tub-to-shower conversion with standard materials sits near the bottom. A custom curbless shower with a bench, niche, frameless glass, and premium fixtures pushes toward the top.
Four variables move that number the most:
- Size and layout: a 36-by-48-inch alcove is the budget case. Expanding into a walk-in footprint means moving walls and re-routing plumbing, which adds labor and inspection scope.
- Existing condition: hidden rot, a failed previous pan, or a subfloor that needs repair adds days and dollars once the wall opens up.
- Plumbing and electrical moves: relocating the drain, adding a niche light, or swapping to a thermostatic valve adds trade work and permit scope.
- Material grade: porcelain with a stock pan versus stone-look slab tile, custom glass, and a designer valve. The material swing alone can be several thousand dollars.
A written estimate itemizes demolition, rough-in, waterproofing, tile labor, glass, fixtures, permit, and cleanup. What it typically excludes: structural repairs discovered after demo, and any change of mind on tile once it’s ordered. No-hassle upfront pricing means the number you see is the number you pay, and there are no change orders unless the scope actually changes. $1,000 off projects over $10,000 and 0% financing for 18 months help when the job lands in the upper range.
See the difference
Before
After
Before
After
Before
AfterWhat Miami Springs Homes Specifically Do to This Job
Miami Springs is a 1920s planned “airport city,” and that history shows up in the walls. Most of the homes we work in around the canal-and-street grid and off the streets near the golf course were built between the 1920s and 1950s in Mediterranean Revival and Mission style, with stucco over concrete block or hollow clay tile and original wood casement or jalousie windows. When we pull a shower out of one of those bathrooms, the framing behind the tile is often original, and moisture has usually found its way in through the decades. That makes this work structural and moisture-driven more often than cosmetic.
The permitting angle matters here too. Miami Springs runs its own building department, and the design review cares about the town’s character in a way that contractors working in neighboring Hialeah or Doral don’t run into. A shower remodel is interior work, so it clears faster than a roof or an addition, but the plan review and inspection still go through the town, and we pull the permit and pass the inspection as part of the job. The May-to-October rainy season is another factor: an open bathroom can’t sit unprotected while an afternoon downpour rolls through, so we schedule demo and closure tightly. Homeowners often pair a shower project with Bathroom Remodeling in Miami Springs when they decide to take the whole room at once, and with exterior work like Roof Replacement & Installation in Miami Springs or Metal Roofing in Miami Springs when the roof is on the same timeline.
Serving Miami Springs, FL – Our Local Coverage Area
We serve Miami Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Miami Springs
Most jobs take three to four weeks from demo to final inspection, with glass fabrication being the usual hold-up. A simple alcove shower with standard materials can finish closer to two and a half weeks. Call (833) 968-1198 to get a timeline for your specific bathroom.
Yes, if you’re moving plumbing, changing the drain, or adding electrical, and Miami Springs issues that permit through the town’s own building department, not the county. Cosmetic tile replacement on an existing shower sometimes qualifies without one, and we’ll tell you which applies. We pull permits and pass inspections as standard scope.
In most cases, yes. If the drain and valve stay where they are, the conversion is a straight swap and stays near the low end of the range. Moving the drain to center a linear drain or add a bench is what triggers the plumbing work and the bigger number.
Expect $5,310 to $14,160 for a walk-in shower build, with the top of the range for custom waterproofing, frameless glass, and premium fixtures. Every project carries the 730-Day Done Right Promise, backed in writing. Call (833) 968-1198 for an exact quote, and the estimate is free.
Not unless the scope changes. Our written line-item quote fixes the price, and hidden damage found after demo is the one exception, which we document and price before doing the extra work. No surprise invoices.
Get a Free Estimate on Your Miami Springs Shower
Call (833) 968-1198 to schedule a free on-site estimate for walk-in showers & shower remodeling in Miami Springs. A live person answers, day or night. On the visit we measure the space, check the walls and floor, talk through layout and materials, and leave you with a written line-item quote. Our team covers Miami Springs, and we treat the whole job, from demolition through final inspection, as Bathroom Remodeling work worth doing right the first time. From foundation to finish line, backed in writing.
Written by the team at Groundwork Construction Co..