Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Coral Terrace, FL: What the Job Actually Involves
Custom & Geometric Windows in Coral Terrace usually means arched, radius, angled or trapezoid units built to fit a specific opening in a concrete-block wall, not a standard off-the-shelf rectangle. A single arched or radius window typically takes 6 to 10 weeks from template to install because the unit is fabricated to order, and a full set of geometric openings across a front elevation generally runs $8,000 – $25,000. Call (833) 968-1198 and we’ll walk your openings and give you a written line-item price.
How We Sequence Custom & Geometric Windows in Coral Terrace
Geometric units leave no room for guessing, so the sequence is fixed. Here’s what actually happens, stage by stage.
Stage 1: Template and field measure (day 1, about 2 hours)
An arched or angled opening in a 1960s block-and-stucco wall is never square, so we template the opening in place rather than trusting a tape measure. You decide the glass package here: laminated impact glass versus insulated impact glass, and a clear or bronze tint. This is also where we confirm whether the opening is truly radius or a segmented arch, because the two are fabricated differently.
Stage 2: Fabrication (weeks 1 through 6 to 10)
The order goes to the manufacturer, and lead time is the longest part of the job. Most curved and radius units in South Florida are built to order; brands like PGT and CGI are common choices for HVHZ-rated assemblies here, though availability drives which line we quote. You approve the shop drawing before anything is cut.
Stage 3: Permit through Miami-Dade County (overlaps fabrication, 2 to 4 weeks)
Because Coral Terrace is unincorporated, window permits go through Miami-Dade County rather than a municipal office, and inspection scheduling runs on the county’s calendar. We handle the submittal and pull the permit; you don’t touch the paperwork. This runs while the units are being built so it doesn’t add time to the schedule.
Stage 4: Demo, prep and setting (1 to 3 days per elevation)
We remove the old unit, inspect the rough opening for rot or failed flashing, and re-frame if the block is out of true. Geometric windows need a solid, square buck behind them, so some openings require new framing or a poured sill before the unit goes in. This is the stage where older homes surprise you.
Stage 5: Flashing, sealing, stucco and final inspection (2 to 4 days)
Waterproofing is the whole game in this climate. We flash the perimeter, seal, and patch stucco to match, then the county inspects the installation. Once it passes, we do a final walkthrough with you and the 730-Day Done Right Promise covers the workmanship in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make on Custom & Geometric Windows
The window itself is only half the decision. These are the trade-offs worth knowing before you commit.
- Frame material: aluminum vs. vinyl vs. wood-clad. Aluminum holds a tight radius cleanly and suits modern geometric shapes; vinyl is the budget choice but struggles with tight curves; wood-clad (Andersen and Marvin both build radius units) gives a warm interior but costs more and needs care in humid air.
- Glass: laminated impact vs. insulated impact. Laminated impact glass is the South Florida standard for wind-borne debris protection and is what most HVHZ assemblies are rated around; insulated impact units add thermal comfort at a higher price.
- Shape: true radius vs. segmented arch vs. angled/trapezoid. A true radius costs more to fabricate than a segmented arch that approximates the curve, and angled units are priced largely on how many unique panes they require.
- Finish: anodized, painted, or factory color-match. Standard finishes are cheaper and faster; a custom color extends lead time.
- Grille and divided-light patterns. Decorative grids add cost per unit and slow fabrication, so decide the pattern at template, not after.
What Custom & Geometric Windows Cost in Coral Terrace, FL
Custom and geometric window projects in Coral Terrace generally fall in the $8,000 – $25,000 range, with a single arch or radius unit often landing between $1,200 and $4,000 installed depending on size and glass. Five variables push a job toward the low or high end:
- Number and size of openings. One accent window is a small job; a full curved front elevation is not.
- Shape complexity. True radius and multi-pane geometric units cost more to fabricate than standard rectangles.
- Rough-opening condition. Failed flashing, rot, or out-of-square block framing means added framing and stucco work.
- Glass and frame grade. Laminated impact glass and wood-clad frames sit at the top; standard impact with aluminum sits lower.
- Permit scope. A county permit covers the units and inspection; structural changes to the opening are separate.
A written estimate from us itemizes the units, the glass, the flashing and stucco, the permit, and the labor, so nothing shows up later as a surprise. What it typically doesn’t include is structural re-framing beyond the opening, interior trim finishing if you want custom casing, or painting. The number you see is the number you pay, and 0% financing for 18 months plus $1,000 off projects over $10,000 is available on larger jobs.
See the difference
Before
After
Before
After
Before
AfterWhat Coral Terrace Homes Do to This Job Specifically
Coral Terrace sits in ZIP 33155, unincorporated Miami-Dade just south of Coral Gables, and the housing stock here is mostly 1950s-to-1970s single-story concrete-block ranch and modest two-story infill on small subdivided lots. That matters for geometric windows in two ways. First, the same job that would need a Coral Gables city permit a few blocks north runs through Miami-Dade County’s process here, and county inspection scheduling shapes when we can close an opening. Second, older block-and-stucco walls are rarely square, so arched and angled units often need fresh framing or a poured sill before setting. Add subtropical sun, salt-laden humid air and heavy summer downpours, and failed flashing or stucco cracking around a new opening turns into a mold risk fast, which is why wind-rated HVHZ assemblies and careful waterproofing are non-negotiable here. Many of these homes also sit in or near the flood zone that drains toward the Coral Gables canal system, so we pay close attention to sill height and sealing on ground-floor openings.
Serving Coral Terrace, FL – Our Local Coverage Area
We serve Coral Terrace and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Custom & Geometric Windows in Coral Terrace
Plan on 7 to 12 weeks from template to final inspection, with most of that time spent on fabrication and the county permit. The physical installation itself is usually a few days per elevation. Call (833) 968-1198 to get a realistic timeline for your openings.
Yes, window replacement and new geometric units require a permit through Miami-Dade County, since Coral Terrace is unincorporated. We pull the permit and schedule the inspection as part of the job, so it isn’t something you handle. Call (833) 968-1198 with your address and we’ll confirm the scope.
Usually yes, if the opening already exists or can be fitted within the existing wall between studs and headers. Cutting a brand-new arched opening in a load-bearing block wall is a structural change and adds cost and engineering. We’ll tell you honestly which situation you’re in during the estimate.
Expect $8,000 – $25,000 for a full geometric window project, with a single arch or radius unit often $1,200 – $4,000 installed. Shape complexity, glass grade and rough-opening condition move the price most. Call (833) 968-1198 for an exact quote; estimates are free.
The 730-Day Done Right Promise covers our workmanship for two years, backing the manufacturer’s warranty on the units themselves. If something isn’t right, we make it right. Call (833) 968-1198 to start your estimate.
Get a Free Estimate on Custom & Geometric Windows in Coral Terrace
If you’re planning custom or geometric windows in Coral Terrace, call (833) 968-1198 for a free on-site estimate. A live person answers around the clock, we’ll template your openings and walk you through glass and frame options, and you’ll get a written line-item price with no surprises. Many homeowners pair the window work with Concrete Driveways & Concrete Work in Coral Terrace or Asphalt Driveways & Resurfacing in Coral Terrace while we’re on site. It’s part of a full Windows & Doors in Coral Terrace scope, and you can see our wider Windows & Doors work or check that we cover Coral Terrace and nearby areas.
Written by the team at Groundwork Construction Co.