Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence Installation in Coral Terrace, FL: What It Costs and How Long It Takes
An iron fence in Coral Terrace runs $3,500 to $9,000 installed, and a typical 100-foot residential run takes 2 to 4 working days once the shop drawings are approved. The wide gap in that range comes down to height, iron grade, whether the fence swings into a driveway approach, and how much tear-out the old fence leaves behind. Call (833) 968-1198 and we’ll walk you through a free on-site estimate for your lot.
How We Sequence an Iron Fence Install
Iron work is not a one-visit trade. The gap between signing and the trucks rolling in matters, because every panel gets fabricated to your measurements, and county inspection has to happen before the posts get filled. Here’s how it runs.
Stage 1, site visit and shop drawings (day 1, 60 to 90 minutes). We measure the actual run along the property line, confirm the setback from the county, and shoot elevations along the fence line. You’ll decide height (4, 5, or 6 feet), picket spacing, finial style, and whether gates swing or slide. This is also where you tell us the kids, the dog, the pool, and the delivery driver – all of it changes where the gates land.
Stage 2, shop drawings and county submittal (days 2 to 8). We draft the fence plan, submit it to Miami-Dade County’s Building Department, and wait on review. You’ll sign off on the drawings before submittal. This is the quietest week for you, and it’s the one most likely to move – county scheduling sets the pace, not us.
Stage 3, demolition and layout (day 1 of construction, 3 to 5 hours). The old fence, stumps, and any concrete footings come out. String lines get pulled and every post location is marked. You approve the gate swing and hardware before we dig.
Stage 4, posts and footings (day 1 to 2). Posts get set in concrete, plumb, at the depth the county requires. No panels go on before the footings cure. This is the stage where a stubborn section of old block wall or a pool deck edge forces a layout change, and we come talk to you before improvising.
Stage 5, panels, gates, and inspection (day 3 to 4). Panels get bolted and leveled, gate hardware goes in, and the county inspector signs off. You walk the line with us before final payment.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Iron Choices That Actually Change Your Price
Nobody walks into an iron fence purchase thinking about picket wall thickness. You should, because it’s the single biggest driver of what you pay and how long the fence lasts in South Florida sun.
- Wrought iron (traditional, welded, solid bar). The real thing – 5/8-inch to 1-inch solid bars, hand-forged or fabricated. Heaviest, longest-lasting, and the top of our range. Suits a homeowner who wants the gate to still line up perfectly in fifteen years.
- Tubular steel (hollow, 14 to 16 gauge). The working-horse choice for most Coral Terrace tight lots. Half the weight, half the price, and it holds up well when the coating is good. Cheaper gauges dent and rust at the welds – specify 14-gauge or heavier.
- Aluminum with iron-look finish. No rust, ever, which matters when salt air blows in off the coast. Lighter feel and it doesn’t have the weight of real iron. Good for a homeowner tired of touch-up painting.
- Finish and color. Powder-coat black is standard. Custom colors and a hand-rubbed bronze finish add cost but read as higher-end from the street.
- Gate hardware. Manual thumb-latch vs. self-closing hinge, keyed entry, and how the driveway gate handles the slope of your approach. This is a line item that gets skipped on cheap quotes, then surprises you later.
What an Iron Fence Costs in Coral Terrace, FL
Expect $3,500 to $9,000 for a residential iron fence in Coral Terrace, with most single-family jobs landing near the middle. Here’s what pushes you to one end or the other:
- Length of run. A 60-foot front-yard fence lands near the bottom of the range. A 150-foot perimeter with two gates climbs toward the top.
- Iron grade. Tubular steel runs bottom of range; true wrought iron with custom finials and a matching walkway gate sits near the top.
- Gate count and automation. Each gate adds cost. Rolling-code remote openers and keypad entry push the number further – our technicians have up to 12 years of experience with residential openers and gate systems.
- Tear-out and site conditions. Old concrete footings, root systems, or a pool deck edge in the run add labor.
- Permit scope. Because Coral Terrace falls under Miami-Dade County, a fence over 6 feet or one near the right-of-way may require additional review. We pull the permit and pass the inspection as part of the quote.
Your written estimate itemizes iron grade, gauge, finish, hardware, gates, permit, and labor – upfront pricing, no surprises. What’s typically not included: removing old plantings, relocating irrigation lines, or a custom stone or concrete base under the fence, which we’ll quote separately if you want it.
See the difference
Before
After
Before
After
Before
AfterWhat Coral Terrace Homes Specifically Do to an Iron Fence Job
This is unincorporated Miami-Dade, ZIP 33155, and that single fact changes how a fence project runs. The permit goes through the Miami-Dade County Building Department, not a city office – which means longer review windows and inspection scheduling that you have to plan around. If you’ve been looking at fencing with a neighbor in Coral Gables proper, their process runs through a city permit and ours runs through the county.
Most of the housing stock is 1950s-to-1970s single-story concrete-block ranch and modest two-story infill on tight subdivided lots. That means short front runs, fences bolted right up against the block-and-stucco walls, and gates that open into a narrow driveway approach. It also means rust-stained stucco and old, failing fence footings are common discoveries once we start digging. Searing sun, salt-laden humid air, and heavy summer downpours chew through iron coatings fast – powder-coat over proper surface prep is not a luxury here, it’s what keeps the fence from streaking rust within two seasons. And because more than one Coral Terrace block sits in the flood zone that drains toward the Coral Gables canal system, we watch footing depths and drainage at the fence line carefully. Our fence installation service covers this community along with the rest of Coral Terrace, so scheduling a walkthrough is straightforward.
Serving Coral Terrace, FL – Our Local Coverage Area
We serve Coral Terrace and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Coral Terrace
Installing an iron fence in Coral Terrace takes 2 to 4 working days once the county permit clears, with permit review adding roughly a week. The fence itself is fast; the county approval is the slow part. Call (833) 968-1198 for a site visit and a realistic calendar for your lot.
Yes, a permit is required through Miami-Dade County for fences over the height limit and any fence near the right-of-way, since Coral Terrace is unincorporated and does not run its own permitting office. We pull the permit and pass inspection as part of the written quote – it’s built in and itemized, not a surprise line.
Budget roughly $35 to $90 per linear foot installed, depending on iron grade and height. A 100-foot run typically lands in the $3,500 to $9,000 range. Call (833) 968-1198 for an exact quote – estimates are free and itemized.
Usually, yes. Iron posts are set in individual footings, not a continuous trench, so we can route around stucco walls, irrigation, and buried plumbing; we locate utility lines before digging. Where a run touches an old block wall, we flag it during the site visit so nothing gets cracked unexpectedly mid-install.
Every iron fence we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Material warranties on iron and gate hardware come from the manufacturer and run longer. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing.
Get a Free Iron Fence Estimate in Coral Terrace
If you’re thinking iron fence, the fastest way to a real number is a walk of your property. Call (833) 968-1198 – a live person answers any hour – and we’ll set a free on-site estimate. We measure the run, confirm the county permit path, and hand you a written line-item quote with iron grade, gauge, and gate hardware spelled out. Many homeowners pair the fence with our fence installation scope for a full perimeter plan, or add Patios, Walkways & Pool Decks in Coral Terrace and ADU Design & Permitting in Coral Terrace when the yard is getting a wider rework – all part of a full Fence Installation in Coral Terrace scope if you go that route.
Written by the team at Groundwork Construction Co.