Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Pinewood, FL: What the Job Actually Involves
A wood fence in Pinewood typically costs $3,500 to $9,000 for a standard residential lot, and most builds run two to four days from layout to final pickets. The number that matters is linear feet, height, and how the posts get set – in 33167’s block-and-stucco yards, setting posts often means cutting into shell or working around existing concrete patios, which is where budgets separate from wish lists. Call (833) 968-1198 for a free on-site estimate; we walk the property, measure the run, and put real numbers in writing.
How We Build a Wood Fence in Pinewood, Step by Step
The sequence matters more on wood than on any other fence material, because every stage depends on the one before it. Here’s how the days actually break down.
Stage 1 – Site walk and layout (day one, 1 to 2 hours). We confirm property lines against your survey or plat, mark the fence run with stakes and string, and identify buried utilities before anything gets dug. This is where you decide gate placement, the side the “good” face points toward a neighbor, and whether the fence follows the property line or steps around it. On 1950s and 60s Pinewood lots, the line often runs through mature trees and old patio slabs, so layout is a real conversation, not a formality.
Stage 2 – Demolition and post setting (day one into day two). Old fence comes down and gets hauled off. Posts go in at 6 to 8 feet on center, set in concrete to the depth the local frost and wind requirements call for, and left to cure. In this climate, post setting is also where we plan for water: posts near the Little River blocks sit in ground that holds moisture longer, so we use pressure-treated material rated for ground contact and set footings so water drains away rather than pooling at the base.
Stage 3 – Rails, framing, and inspection (day two). Rails get attached, the frame gets squared and braced, and any permitting or inspection step for your run is scheduled. You decide at this point whether you want two or three rails, and whether the rails sit between posts (a cleaner, more modern face) or behind the pickets.
Stage 4 – Pickets and gates (day three). Pickets go up, gate hardware gets hung and adjusted, and the board spacing gets set to what you chose. This is the slow, visible day, and it’s the one most homeowners want to be home for. We show you the finished face before we call it done.
Stage 5 – Finish and walkthrough (day three or four). We clean the site, haul debris, and walk the run with you. Stain or sealer, if you’re having it done, gets scheduled for after the wood has had a few weeks to dry. The 730-Day Done Right Promise covers the workmanship from that walkthrough forward: if something isn’t right, we make it right.
Total elapsed time depends on run length, gate count, and whether demolition is happening. A short run on open ground moves fast; a long run through established landscaping with multiple gates takes longer. We give you a realistic window in the estimate, not a promise we can’t keep. Because exterior work here schedules around summer afternoon downpours and the June through November storm window, we build in weather days rather than pretending they won’t happen. If your larger project also needs a full Fence Installation in Pinewood that includes other sections and gate systems, we scope the whole perimeter together so the wood run matches the rest.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Wood Fence Choices You’ll Actually Make
Wood fencing isn’t one product. The decisions below drive both the look and the number, and each one trades something off.
- Wood species. Pressure-treated pine is the workhorse: affordable, easy to work with, and it takes stain well, but it needs re-sealing every two to three years in South Florida humidity. Cedar resists rot and insects on its own and looks better unpainted, at a higher material cost. Cypress splits the difference for a natural look. Treated pine is right for most budgets; cedar is right if you want to skip the finish and let it weather.
- Picket style and height. Dog-ear, flat-top, and stockade profiles are the common picks. Six feet is the standard privacy height in Pinewood; four feet suits front yard runs and reads more open. Height changes material and post sizing, so it’s a cost decision as much as an aesthetic one.
- Board-on-board vs. butt-jointed. Board-on-board overlaps pickets for a fully sight-tight, slightly thicker look and better wind resistance. Butt-jointed is a cleaner, denser face at a lower material cost. If you want true privacy with no gaps, board-on-board is the honest choice.
- Rails: two or three. Three rails add rigidity, especially on long runs and in a wind zone, for a modest material bump.
- Posts: set in concrete vs. driven with a footing. Concrete-set posts are the standard here and hold up under wind load. We discuss footing depth at the site walk, since it’s tied to local code requirements.
- Gate and hardware. A pedestrian gate with a self-closing hinge is standard; a double drive gate or a gate that spans a wider opening costs more because the load on the posts and frame increases.
- Stain and sealer. A finish extends the life of treated pine noticeably in this sun and rain. We quote it separately so you can see exactly what it adds.
We don’t push a brand on you for wood. What we do carry a point of view on is the material grade: we quote real product, not the thinnest stock available, because a fence that fails in five years isn’t a saving.
What a Wood Fence Costs in Pinewood, FL
A typical residential run here lands between $3,500 and $9,000, and that range holds across the material and style choices above. Five things push a job to one end or the other:
- Linear feet. The single biggest factor. A standard lot perimeter runs a few hundred feet; a large corner property can double that. Price scales roughly with length.
- Height and style. Six-foot board-on-board costs more per foot than a four-foot butt-jointed run, both in material and labor.
- Demolition and access. Removing and hauling an old fence adds cost. A run the crew can walk straight down is cheaper than one that threads between a pool cage and a shed.
- Gate count and hardware. Each gate adds framing, hardware, and adjustment time.
- Site conditions. Cutting into solid concrete or working around existing slab and landscaping adds labor. This is where Pinewood’s block-and-stucco yards and older patios show up in the number.
A written estimate from us lists the run length, post spacing, material and grade, gate count, demolition, and finish as separate line items, so you can see where the money goes. What’s typically not included unless you ask: landscaping repair beyond the fence line, moving sprinkler heads or low-voltage lighting, and stain or sealer if you’re adding it later. Upfront pricing means the number in the estimate is the number you pay, with no change orders mid-job. If the project is over $10,000, our $1,000 off promotion applies, and 0% financing for 18 months is available so a larger perimeter project doesn’t have to wait.
See the difference
Before
After
Before
After
Before
AfterWhat Pinewood Homes Do to This Job
Pinewood sits in Miami-Dade’s high-velocity hurricane zone, and that changes a wood fence job in ways most of inland Florida never deals with. Every fence here has to meet the windborne-debris and product-approval requirements of the Florida Building Code, which means the posts, footings, and hardware we use aren’t generic – they’re specified and inspected. Permit scope on a fence run varies, but wind-load engineering is not optional in this zone, and we plan for it in the estimate rather than discovering it mid-build. Older block-and-stucco yards in 33167 also mean we often tie into or work around existing concrete, patio slabs, and shells rather than open dirt, and near the low-lying blocks toward the Little River, a shallow water table means we think hard about how post footings drain before we set them.
The housing stock here runs mid-century, 1950s and 60s concrete-block single-family homes with mature trees and established landscaping, plus 1970s and 80s low-rise apartments and newer infill townhomes. A wood fence on an older Pinewood lot is usually replacing something past its service life, and what we see failing most is post rot at the ground line and leaning runs from hardware that gave out decades ago. Humidity and storm-season wind are the two forces that age a wood fence fastest here, and the material and footing choices above are how we push back on both. We work across Pinewood and the surrounding area, and we schedule exterior runs around the storm watch calendar rather than through it. If the driveway or patio is part of the same refresh, homeowners often pair this with our Paver Driveways in Pinewood work, since the fence line and the pavers meet at the same edge and are easier to plan together.
Serving Pinewood, FL – Our Local Coverage Area
We serve Pinewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in Pinewood
Most runs take two to four days from layout to final walkthrough, with post setting curing overnight between day one and day two. A short run on open ground can finish in two days; a long perimeter with multiple gates and demolition takes longer. Call (833) 968-1198 for a realistic window on your specific run – estimates are free.
Fence permitting in Pinewood depends on height and placement, and because 33167 is in a high-wind zone, the structural requirements are stricter than on an inland fence. We confirm the permit scope for your run and pull what’s required. Call (833) 968-1198 and we’ll walk through it for your property – estimates are free.
No. Our estimates are fixed for the scope written, and the number you see is the number you pay, with no change orders mid-job. What can change the scope is a decision you make – adding a gate, upgrading to cedar, adding stain – which we quote before doing it. Call (833) 968-1198 for a written line-item estimate – it’s free.
Yes, with planning. We lay out posts to work between established trees and around patio slabs rather than through them, and we set the run to the property line so we’re not disturbing more than we need to. Plantings right on the line may need pruning or relocation, and we flag that at the site walk. Call (833) 968-1198 to schedule an estimate.
Workmanship on a wood fence is covered by our 730-Day Done Right Promise – if it isn’t right, we make it right for two years after the walkthrough. Material warranty depends on the product you choose and comes with the manufacturer’s coverage. Call (833) 968-1198 to get the details in your written estimate.
Get a Free Wood Fence Estimate in Pinewood
Call (833) 968-1198 to schedule a free on-site estimate for a wood fence in Pinewood. We measure the run, check the ground and utility layout, confirm what permitting requires for your height and placement, and leave you with a written line-item quote the same visit. A live person answers the phone around the clock, so you’re not leaving a message and waiting until Monday. See our full Fence Installation service for the wider scope, or ask about pairing the fence with Concrete Driveways & Concrete Work in Pinewood while the crew is on site.
Written by the team at Groundwork Construction Co.