Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Pinewood, FL: What It Costs and How Long It Takes
A chain link fence in Pinewood, FL typically runs $3,500 to $9,000, with most residential lots landing between $4,200 and $6,800 for 150 to 250 linear feet of galvanized or vinyl-coated fence at 4 to 6 feet tall. A standard residential job takes 2 to 4 working days from dig to gates swinging, assuming the permit clears first. Call (833) 968-1198 for a free on-site estimate and a written line-item quote before anything gets ordered.
How a Chain Link Fence Goes In, Stage by Stage
Most homeowners picture a crew showing up with posts and a roll of mesh. The real sequence is longer than the install itself, and knowing the stages tells you what to decide and when.
Stage 1: Site visit and layout (day 1)
We walk the property line with you, confirm where the fence actually belongs, and call in the utility locate. Florida law requires that locate before anyone drives a spade into the ground, and it usually takes 2 to 3 business days to come back. That wait is the reason a “next-day install” quote should make you suspicious.
Stage 2: Permit filing (days 1 – 10, runs parallel)
Pinewood sits in a high-velocity hurricane zone, so fence permits here get reviewed against wind-load requirements that many Florida markets never touch. We file the application, submit the product-approval documentation for the specific fence system, and wait for the sign-off. Typical window is 5 to 10 business days.
Stage 3: Demo and prep (day 1 of build)
Old fence comes out, posts and concrete footings get pulled, and the ground gets cleaned up. On a 200-foot run with rusted posts, budget half a day. If the old fence is yours to keep in some sections, tell us before we start, not after.
Stage 4: Setting posts and concrete (day 1 – 2)
Holes get dug to depth, set in concrete, and left to cure. This is the part that dictates the schedule. Posts that aren’t cured before the top rail goes on will lean within a season.
Stage 5: Mesh, rails, gates, tension (day 3 – 4)
Top rail, tension wire, mesh, and gate hardware all go on here. We tension the fabric and confirm every gate swings clean before we walk it with you. Any decisions you’ll need to make along the way: post spacing (8 vs. 10 feet), gate width, and whether you want a walk gate at all.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’re Choosing Between on a Chain Link Fence
The material questions on a chain link job are simpler than on a wood or vinyl fence, but they still move the price and the lifespan significantly.
- Galvanized vs. vinyl-coated. Galvanized steel is the budget choice at roughly $12 – $18 per linear foot installed; it holds up well but weathers to a dull gray. Vinyl-coated (often black or green) runs $16 – $24 per linear foot and holds color, resists salt air better, and blends visually. In Pinewood’s subtropical sun, the color retention of a coated system is worth the difference for most homeowners.
- Height. 4 feet is standard for a residential boundary; 5 and 6 feet cost more per foot and require taller posts. Anything over 6 feet starts triggering different wind-load calcs and, in some HOA communities, a fight.
- Post gauge. Thicker-wall posts (heavier gauge) cost more upfront but resist the wind-driven lean that becomes a recurring problem in South Florida. Ask what gauge the quote specifies.
- Gates. A single walk gate at 3 – 4 feet wide is a modest add; a double drive gate wider than 8 feet needs heavier framing and posts, and that cost is real.
- Top rail vs. tension wire. Top rail gives a cleaner look and more rigidity; tension wire is cheaper and fine for lower-visibility runs.
If you’re fencing a yard as part of a full Fence Installation in Pinewood project that also includes a gate system or a mixed-material front section, we’ll price the chain link run separately so you can see exactly where the dollars go. Our broader Fence Installation service covers the full menu if you want to compare materials.
What a Chain Link Fence Costs in Pinewood, FL
For a typical residential lot, expect $3,500 to $9,000 installed, all in: materials, labor, concrete, permit, and cleanup. The spread comes down to five factors.
- Linear footage. 100 feet at the low end, 300-plus feet at the high end. Footage is the biggest single driver.
- Existing fence removal. Pulling old posts and hauling debris adds cost, and rusted-in-concrete posts are the slow kind.
- Grade and access. A flat lot is fast; a sloped or obstructed line (trees, sheds, buried utilities) slows the dig and adds labor.
- Material system. Galvanized vs. vinyl-coated, post gauge, and gate configuration each shift the total.
- Permit scope. The high-velocity hurricane zone product-approval process adds cost over a bare-bones fence permit elsewhere.
Every Pinewood estimate we write is line-item: footage, gauge, coating, gate count, permit fee, and removal, all spelled out. Upfront pricing, no surprises. What’s included: all materials, labor, concrete, permit application, cleanup, and the 730-Day Done Right Promise on workmanship. What’s typically not: landscape repair, sod replacement if we have to trench through a lawn, or fence removal beyond the scope noted in the quote.
See the difference
Before
After
Before
After
Before
AfterWhat Pinewood Homes Specifically Do to This Job
The 33167 blocks are mostly mid-century concrete-block single-family homes from the 1950s through the ’60s, with 1970s – 80s low-rise apartments and newer infill townhomes mixed in. That matters for a fence because the property lines run against block-and-stucco walls, and setting posts close to a CMU wall takes more care than a wood-sided lot. We also see a lot of old chain link that was installed decades ago with thin posts set shallow; those posts lean, and half the time the “repair” quote is really a replacement job.
Pinewood’s high-velocity hurricane zone status means the fence system itself has to be an approved product with wind-load documentation. That’s a real requirement here, and it’s why we file the permit rather than leaving you to guess. In the low-lying blocks near the Little River, footings also have to be planned around a shallow water table, so post depth and concrete mix get attention that a dry inland lot wouldn’t need. Schedule around June through November hurricane season and we’re watching the storm track while we pour.
Homeowners often pair a new chain link boundary fence with Concrete Driveways & Concrete Work in Pinewood to fix the apron and gate approach in the same pass, or with Asphalt Driveways & Resurfacing in Pinewood when the driveway comes up to the new gate line.
Serving Pinewood, FL – Our Local Coverage Area
We serve Pinewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Pinewood
A typical residential chain link fence takes 2 to 4 working days on-site once the permit clears. The permit and utility locate together usually add 1 to 2 weeks before that, so the realistic calendar time from signed quote to finished fence is 2 to 3 weeks. Call (833) 968-1198 and we can give you a rough schedule for your lot.
In most cases, yes. Pinewood’s high-velocity hurricane zone requirements mean the fence must be an approved product with wind-load documentation, and Miami-Dade permitting handles the review. We file the permit and pull the documentation for you. Call (833) 968-1198 to talk through your specific lot and property-line situation.
Expect $3,500 to $9,000 installed for a typical residential lot, with most landing in the $4,200 – $6,800 range. Footage, material system, removal, site access, and permit scope all move the number. Call (833) 968-1198 for an exact quote; estimates are free and written line-item.
Almost always, yes. Fence posts go along property lines and don’t require digging near plumbing, electrical, or the house structure. The utility locate confirms what’s underground before we dig. Call (833) 968-1198 if you’re worried about a specific buried line or an irrigation system.
Every fence we install is covered by our 730-Day Done Right Promise on workmanship. If a post leans, a gate sags, or the install isn’t right, we make it right within that window. Manufacturer warranties on the fencing material pass through as well. Call (833) 968-1198 for details on your specific system.
Get a Free On-Site Chain Link Fence Estimate in Pinewood
Call (833) 968-1198 and a live person answers, day or night. We’ll schedule a free on-site visit, walk the property line with you, and leave you a written line-item quote covering footage, material system, permit, and removal. If it’s part of a larger project, we’ll price it separately so you can compare. $1,000 off projects over $10,000 and 0% financing for 18 months are available.
Written by the team at Groundwork Construction Co.