Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Coral Gables, FL: What It Costs and How the Work Runs
A wrought iron fence in Coral Gables typically runs $3,500 to $9,000 for a residential property, with most single-family lots landing between $4,500 and $6,800 depending on linear footage, height, and finish. The work itself takes two to four weeks from signed proposal to final inspection, and architectural review can add two to six weeks on top of that. Call (833) 968-1198 for a free on-site estimate and a line-item quote you can compare line by line.
How a Groundwork Iron Fence Project Moves, Stage by Stage
Most homeowners picture a crew showing up with panels and leaving by lunch. An iron fence doesn’t work that way. It’s a fabricated product, and the sequence matters as much as the installation. Here’s what actually happens.
Stage 1: Site visit and pre-submittal research (day 1)
We walk the property line with you, measure the run, note grade changes, and photograph the existing fence, gate hardware, and any coral rock walls or terracotta coping the new fence will meet. You’ll tell us what the fence needs to do: keep a dog in, define the front yard, screen a pool. From that we sketch a layout and flag anything that touches the public right-of-way, since that’s where review gets involved.
Stage 2: Design review submission (weeks 1 through 6, varies)
Coral Gables reviews exterior changes through its Board of Architects before a building permit is issued. Submittals move faster when they arrive complete: scaled drawings, material and finish samples, and photos of the streetscape. Homeowners decide fence height, picket profile, and finish color during this window, because those are the exact items reviewers comment on.
Stage 3: Fabrication (two to three weeks after approval)
The approved design goes to the fabricator. Panels are cut, welded, and finished off site. You’ll choose between a shop-applied powder coat and a hand-applied paint finish before this stage locks, since changing finish after fabrication means sandblasting and starting over.
Stage 4: Demo, footings, and setting (two to four days on site)
Old fence comes out first. Posts are set in concrete footings sized to the fence height and wind exposure, then cured before panels hang. On most residential runs we’re setting posts on day one and hanging panels by day two or three. Gates get their hinges and hardware last.
Stage 5: Final inspection and walkthrough (day four, plus the inspection schedule)
We walk the finished line with you, check gate swing and latch alignment, touch up any field welds or scratches, and confirm the inspection is on the books. You get the written workmanship paperwork at this point, covered by our 730-Day Done Right Promise. If anything’s off, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Material grade. Solid wrought iron, welded steel with an iron-like profile, and aluminum made to look like iron are the three real choices. Wrought iron is heaviest and priciest; steel is the common middle; aluminum costs less and resists rust better but dents more easily.
- Finish. Powder coat holds color evenly and needs less repainting. Hand-applied paint has a slightly richer look but wants a recoat every few years in South Florida sun and salt air.
- Height and picket spacing. Four feet is standard for a front-yard run; five to six feet suits pool enclosures and side yards. Picket spacing affects both privacy and code compliance where a pool is involved.
- Gate style. Manual swing gates are the default. Automated gates add cost and wiring, and need their own power source and safety sensors.
- Post anchoring. Set-in-concrete posts versus surface-mounted base plates. Concrete footings hold up better against wind load; base plates are for surfaces where you can’t dig, like a finished paver edge.
We walk you through each of these with samples in hand during the estimate. If you’re already planning a wider yard project, it’s often smart to look at the whole scope together through Fence Installation in Coral Gables so the fencing, driveway, and grading tie in cleanly.
What Iron Fence Costs in Coral Gables, FL
Residential iron fence pricing here lands between $3,500 and $9,000, and the spread comes down to four things: linear footage, height, material grade, and finish. A 100-foot four-foot steel run in powder coat sits near the bottom of that range. A 200-foot six-foot wrought iron run with an automated gate and custom scroll work pushes toward the top.
The variables that move the number most:
- Linear footage and corners. Straight runs price cleanly; every corner, return, and gate opening adds a post and labor.
- Existing conditions. Removing an old fence, cutting through coral rock, or working around mature oak roots adds demo and prep time.
- Finish selection. Powder coat over a standard color is priced in; specialty colors and hand-applied paint add cost.
- Review scope. If your project requires Board of Architects sign-off, that review cycle is real time and real paperwork, and we build it into the quote rather than surprise you later.
- Gates and automation. A single pedestrian gate is modest; a driveway gate with an operator, keypad, and safety hardware is a different line item entirely.
A written estimate from us is itemized: footage, grade, finish, gates, footings, demo, and the review or permit scope. What’s typically not included: repair to landscaping the old fence damaged, electrical work for an automated gate, and any masonry repair where an old post pulled free of a coral rock wall.
See the difference
Before
After
Before
After
Before
AfterWhat Coral Gables Homes Specifically Do to This Job
No two cities treat an iron fence the same way, and Coral Gables is at the strict end. The city’s Board of Architects reviews exterior changes, and under the Mediterranean Revival design code that review can extend down to finish color. That means the same fence that gets installed in neighboring Coral Gables‘ nearby communities in two weeks can sit in submittal here for a month before a fabricator touches metal. We plan for that review cycle up front and submit complete packages so we’re not resubmitting.
The housing stock shapes the work just as much. Most of what we see is 1920s Mediterranean Revival and Mission-style homes, coral rock (oolitic limestone) construction from George Merrick’s original planned community, and Spanish-style commercial buildings downtown. Setting a fence post into that ground means knowing when you’ll hit oolitic limestone and how to anchor without cracking a historic wall. And the climate dictates the spec: hurricane season runs June through November, and Florida Building Code high-velocity hurricane zone requirements govern post spacing, footing depth, and gate anchoring on nearly every job here. A fence that meets generic residential standards isn’t enough.
Serving Coral Gables, FL – Our Local Coverage Area
We serve Coral Gables and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Coral Gables, FL
Installation on site runs two to four days for a typical residential run, but the full timeline from signed proposal to finished fence is two to four weeks, plus two to six weeks if architectural review is required. The review cycle drives most of that delay. Call (833) 968-1198 and we’ll give you a realistic schedule for your property.
Yes, most iron fence projects here require a permit, and exterior changes can trigger Board of Architects review. Because Coral Gables operates a design-review regime, the fence height, picket profile, and finish color all sit in scope. We handle the submittal and inspection coordination as part of the job. Call (833) 968-1198 to talk through your specific property.
In most cases, yes. We set footings around existing root zones and anchor to coral rock walls with surface-mounted plates where digging isn’t possible. The honest exception: if the old fence pulled loose from a wall and cracked the masonry, some repair is unavoidable. We flag that at the site visit. Call (833) 968-1198 for a free on-site look.
Expect $3,500 to $9,000 for a residential run, with most jobs landing between $4,500 and $6,800. Linear footage, height, material grade, finish, and gate complexity all move the number. Call (833) 968-1198 for an exact quote, and estimates are free.
No. Our quote is itemized upfront and the number you see is the number you pay. If we discover something in the ground during prep (an old footing, a surprise utility line) we stop and talk to you before a change is made. Every job is covered by our 730-Day Done Right Promise. Call (833) 968-1198 to get your estimate started.
Get a Free Iron Fence Estimate in Coral Gables
Call (833) 968-1198 and you’ll reach a live person, any hour of the day. We’ll ask about your property line, your timeline, and what the fence needs to do, then schedule a free on-site estimate. You’ll get a written line-item quote covering footage, material, finish, review scope, and inspections, so you can compare it against any other bid without guesswork. From foundation to finish line, built to last, backed in writing.
Written by the team at Groundwork Construction Co.