Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Fountainebleau, FL: What You’re Actually Buying
Paver driveways in Fountainebleau, FL typically run $7,000 – $18,000 and take three to five working days from demo to first drive. That covers excavation, a compacted crushed-stone base sized to Miami-Dade’s soil and drainage conditions, a sand-set or stabilized-joint paver field, and edge restraint. Most of our Fountainebleau jobs land near the middle of that range because the lots are tight and the base prep is the real work. Call (833) 968-1198 for a free on-site estimate and a written line-item quote.
How a Paver Driveway Comes Together, Stage by Stage
Paver work is mostly invisible. What you see at the end is a day or two of laying; the prep underneath decides whether it still looks level after five hurricane seasons. Here’s the actual sequence and where you make decisions.
Stage 1 – Site check and layout (day 1, half day). We measure the drive, confirm slope away from the structure, and locate utilities and any existing irrigation. You decide the field pattern and the border course here, because the border drives the cutting layout later. This is also when we flag whether the entry apron needs reworking to meet the swale.
Stage 2 – Demolition (day 1, remainder). Existing concrete or asphalt comes out and goes to a licensed disposal site. On a typical Fountainebleau single-family drive that’s a one-day job with a machine and a dumpster. You decide nothing during demo; you get a photo walkthrough of what we found under the slab, which matters more than you’d think on older 33172 properties.
Stage 3 – Base prep and compaction (day 2, full day). This is the part that separates a driveway that lasts from one that ruts. We excavate to depth, lay and compact the crushed-stone base in lifts, and check grade with a laser. Base depth increases where we’ve found soft or organic soil, or where the drive will carry a heavier vehicle. If your drive doubles as access to a detached workshop or garage, tell us now – we adjust base depth and paver thickness accordingly.
Stage 4 – Edge restraint and bedding sand (day 3, morning). Edge restraint goes in before the pavers, not after. It’s a concrete or spiked plastic edge that keeps the field from spreading under load and heat. You won’t see it once the job is done, and it’s the single most-skipped step in cheap paver work.
Stage 5 – Paver lay, cuts, and joint sand (days 3 – 4). Field pavers go down, borders get cut to the edge, and we set the joint sand with a plate compactor. You decide the joint sand type here – regular sand is fine for most drives; a stabilized polymeric joint makes more sense where the drive drains toward a swale or where you’d rather not re-sand in two years.
Stage 6 – Cleanup and first drive (day 5, morning). We sweep, check the whole field for lippage, and walk the job with you before final payment. The drive is ready to use the same day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Be Choosing Between
Most of the price swing on a paver driveway is material, not labor. Here’s the honest trade-off on each choice.
- Concrete pavers vs. clay brick pavers: Concrete is the standard choice for a driveway and the cheaper one, typically $4 – $8 per square foot installed. Clay brick runs higher and holds color longer in the South Florida sun, but it costs meaningfully more and isn’t the right call on a tight budget.
- Standard 60mm vs. 80mm pavers: 60mm is fine for a standard residential drive. If the drive carries a heavy truck, trailer, or RV, or your property has an oversized vehicle, ask for 80mm – it costs more per unit but resists point-loading and rutting far better.
- Paver thickness of the base vs. thickness of the paver: A thicker paver on a thin base still fails. Spend the money on base depth first if you have to choose.
- Sand-set vs. polymeric-stabilized joints: Sand-set is the lower-cost standard and needs occasional re-sanding. Polymeric joint sand costs a few hundred dollars more and locks the joint against washout during the June-to-November storm season.
- Pattern: Running bond and herringbone are the two most common; herringbone interlocks better and resists edge creep, which matters on a drive that gets backed into daily. Basketweave reads dressier. Your border course is often a contrasting color from the same Belgard family.
What Paver Driveways Cost in Fountainebleau, FL
Plan on $7,000 – $18,000 for a paver driveway in Fountainebleau. The low end is a straightforward single-car drive over sound base, standard 60mm concrete pavers, sand joints. The high end is a wider drive, more excavation, thicker base, upgraded pavers, and a stabilized joint.
Here’s what moves the number:
- Square footage and shape: A straight 400-square-foot drive and a curved 700-square-foot drive with two walkovers aren’t the same job. Every cut and every turn adds labor.
- What’s underneath: Removing a sound concrete drive is a different cost from finding failed subgrade, roots, or an old asphalt layer where you didn’t expect one.
- Base conditions: South Florida’s high water table and sandy soils can require deeper or engineered base in spots. We find this on the site evaluation, not after demo begins.
- Paver grade and pattern: Standard concrete running bond sits at the bottom of the range; clay brick or complex herringbone with borders pushes toward the top.
- Permits and site constraints: A drive that changes the entry apron or crosses a swale needs Miami-Dade review and a tighter inspection sequence. That’s labor and time on the front end.
Your written estimate itemizes each of these – demo, disposal, base, pavers, edge, joints, cleanup – so there’s no line that shows up mid-job. If the site check surfaces something the original walk didn’t see, we price it as a change order before we touch it, not after. No-hassle upfront pricing, the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Fountainebleau Properties Specifically Do to This Job
Fountainebleau runs through ZIP 33172, the dense unincorporated Miami-Dade corridor west of the Florida Turnpike. It’s mostly 1970s-to-2000s concrete-block and stucco construction – mid-rise condos, garden apartments, townhomes, and strip retail – so most of the driveways we’re called about sit behind a single-family home or townhome wedged between larger buildings. What that changes: lots are tight, and access is the constraint more often than the design. We’re often working with neighbors’ parked cars on one side and a lot line on the other, so the paver staging has to be planned around it.
The other local factor is drainage. The corridor sits on Miami-Dade’s limestone and sandy soils, and heavy summer rain doesn’t soak in the way it does inland – it sheets. That makes slope and joint-sand choice more than cosmetic details. We set a slightly steeper pitch away from the structure than you might see on a drier site, and we lean toward polymeric joint sand where the drive drains toward the swale, because a washout joint becomes a rut becomes a broken edge over a couple of storm seasons.
On permits: Miami-Dade County’s product-control system (NOA) for hurricane-rated materials is stricter and more paperwork-heavy than most neighboring jurisdictions, and anything touching the driveway approach, right-of-way, or site drainage triggers a county review. For a straight paver replacement without a change to the apron, you typically don’t need a building permit – but your HOA may still require architectural approval, and we’ll tell you which applies before we schedule. If the wider scope turns into a full Driveway & Pavers in Fountainebleau project – pavers along with a walkway, apron, and edge drain – we handle it as one plan.
We cover the whole corridor and the surrounding cities, including Olympia Heights, Coral Terrace, Miami Springs, and Glenvar Heights. You can see our full Fountainebleau service area for what else we do here. Homeowners often pair a new drive with ADU Design & Permitting in Fountainebleau or a Garage Conversion ADU in Fountainebleau, since the driveway needs to carry the access anyway. And if you’re weighing paver against concrete or asphalt, the Driveway & Pavers overview is the place to start.
Serving Fountainebleau, FL – Our Local Coverage Area
We serve Fountainebleau and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Fountainebleau
A typical paver driveway in Fountainebleau takes three to five working days from demo to first drive. Base prep is one full day; laying and cutting is one to two; the rest is edge, joints, and cleanup. Weather is the only real variable – afternoon thunderstorms in the June-to-November season can push a day. Call (833) 968-1198 to get a firmer schedule on your specific drive.
A straight paver replacement usually doesn’t require a Miami-Dade building permit. You do need one if the work changes the driveway apron, the right-of-way, grading that affects drainage, or site plan elements. Your HOA may also have its own approval process regardless. We’ll confirm which applies during the free estimate – call (833) 968-1198 and we’ll walk you through it.
Expect $7,000 – $18,000 for a paver driveway in Fountainebleau. Where you land depends on square footage, what’s being removed, base depth, paver grade and thickness, pattern complexity, and whether a permit or swale rework is involved. A written line-item quote pins it down. Call (833) 968-1198 for your free on-site estimate.
Yes – most Fountainebleau paver jobs stay within the existing drive footprint and don’t disturb utilities. We’re replacing the surface and rebuilding the base, not relocating gas, water, or electrical. If a utility runs under the drive at shallow depth, we’ll note it during the site check and plan accordingly, but it rarely changes the plan. Call (833) 968-1198 to schedule a walkthrough.
Every paver driveway we install is covered by our 730-Day Done Right Promise – if the workmanship isn’t right, we make it right, for two full years. That’s one of the longest workmanship guarantees in the residential construction space. Paver manufacturer warranties run separately on the product itself. Call (833) 968-1198 with questions about what’s covered.
Get a Free Paver Driveway Estimate in Fountainebleau
We’ll come out, measure the drive, check the base and drainage, and hand you a written line-item quote – no pressure, no vague numbers. Estimates are free and there’s no obligation. Our technicians have up to 12 years of experience with paver driveways across Fountainebleau, and calls are answered by a live person, 24/7. Call (833) 968-1198 to schedule yours. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co. of Miami.