Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Olympia Heights, FL: What It Costs and How Long It Takes
A tub-to-shower conversion in Olympia Heights typically runs $3,500 to $10,000 and takes five to eight working days from demo to final inspection. The job means pulling the tub and its surround, reworking the drain and valve to fit a shower pan, waterproofing the walls and floor, and setting new tile or a solid-surface panel system. Most of the homes we work on here are mid-century ranch houses in ZIP 33165 where the original tub is pushing fifty years old. Call (833) 968-1198 for a free on-site estimate.
How the Work Actually Runs, Day by Day
Conversions are sequenced jobs, and the sequence is what keeps them on schedule. Here’s the order we follow, and what you’ll be deciding at each stage.
Stage 1: Measure and permit (before demo, 3 to 7 business days)
We measure the alcove, check the drain location and valve depth, and confirm whether the existing framing can take a shower pan without modification. Most conversions in Olympia Heights need a plumbing permit and an inspection, and the paperwork goes in before anything gets torn out. You decide here on tile or panel, and whether the valve moves.
Stage 2: Demo and rough-in (day 1, roughly 4 to 6 hours)
Tub, surround, and old backer come out. We inspect the framing and subfloor behind the walls, which is where surprises live in 1960s concrete-block homes. The drain gets relocated to a centered shower position, and the valve gets swapped to a pressure-balance or thermostatic unit. If you’re moving the valve off the existing wall, that decision has to be made before day 1, not during.
Stage 3: Waterproofing and pan (day 2)
The shower pan goes in and the walls get a bonded waterproofing membrane tied continuously into the drain flange. This is the stage that determines whether the shower leaks in year eight. It is also the stage we never compress. You’ll see it before tile goes up.
Stage 4: Tile and fixtures (days 3 through 6)
Wall tile, floor tile, niche, and trim go in, followed by the showerhead, valve trim, and door or curtain rod. Grout and sealant cure before the shower gets used. If you picked a solid-surface panel system instead of tile, this stage compresses to about a day and a half.
Stage 5: Inspection and walkthrough (day 7 or 8)
The plumbing inspection is scheduled, we walk the finished shower with you, and the work falls under our 730-Day Done Right Promise. If something isn’t right, we make it right, and that commitment is in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make, and What Each One Actually Costs You
Almost every decision on a conversion comes down to three things: how the walls are finished, what the pan and drain look like, and how much glass you want. Here’s the honest version of each.
- Porcelain or ceramic wall tile ($0 to $2,500 added): The most durable and easiest to clean, and the most labor. Large-format tile (12×24 or bigger) means fewer grout lines and less scrubbing, but the walls have to be dead flat. Smaller tile forgives a wavy wall. Either holds up for decades in this climate.
- Solid-surface panel systems (saves roughly $800 to $1,800 vs. tile): Acrylic or composite panels go up fast, have almost no grout, and suit a rental or a fast flip. The trade-off is a plastic look and a shorter lifespan than tile, and panels can’t be patched invisibly if they crack.
- Shower pan material: A tiled mud-set pan with a linear drain costs more but lets you run large floor tile and looks built-in. A prefabricated acrylic or fiberglass pan costs less, installs faster, and is the practical call if the floor framing is uneven.
- Glass and enclosure (typically $600 to $2,200): A frameless glass panel opens the room and is the visual payoff of the conversion. A framed sliding door costs much less and gives you a place to hang a towel. Glass choice drives the finished look more than tile choice does.
- Valve and fixtures (roughly $250 to $900 in parts): A basic pressure-balance valve is code-minimum and fine. A thermostatic valve with a separate volume control costs more and gives you precise temperature, which matters in a household with kids or older adults.
Finish selection should also account for what this climate does to bathrooms. High humidity and year-round heat mean mold pressure is constant, so continuous waterproofing and good exhaust fan sizing matter more here than in a dry market.
What Tub-to-Shower Conversion Costs in Olympia Heights, FL
Expect $3,500 to $10,000 for a tub-to-shower conversion in Olympia Heights. The low end is a standard alcove with a prefabricated pan, panel walls, and the valve staying where it is. The high end is a tiled shower with a linear drain, frameless glass, a relocated valve, and some framing repair behind the wall.
Five variables push the number up or down:
- Alcove size: A standard 60-inch tub opening fits a stock pan. A wider or oddly framed alcove needs a custom pan and added labor.
- Existing condition: Rot, failed backer board, or a rusted drain assembly found during demo adds repair time. In homes built in the 1950s through the 1970s, this is common.
- Moving plumbing or electrical: Relocating the drain to center it, moving the valve to a different wall, or adding a light and exhaust fan all add scope and inspection items.
- Material grade: Tile versus panel, frameless versus framed glass, stock versus designer fixtures.
- Permit scope: A plumbing permit and inspection is standard. Structural changes or a wall move trigger more review and more time.
Every written estimate we hand over itemizes labor, materials, permit fees, and disposal, with upfront pricing and no surprises once the walls come open. Financing at 0% for 18 months is available, and projects over $10,000 qualify for $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Heights Homes Specifically Do to This Job
Olympia Heights is a mid-century suburban pocket of unincorporated Miami-Dade, and the housing stock tells you what to expect before you ever open a wall. Most of these homes are single-story concrete-block and stucco ranches built from the 1950s through the 1970s, many with original terrazzo floors and bathroom tile that’s been patched two or three times. When we pull a tub in a home off Southwest 40th Street or near the Coral Way corridor, we routinely find a drain assembly at the end of its life, backer board that’s failed at the wet wall, and framing that’s been notched by an earlier remodel.
Permitting here runs through Miami-Dade County, not a city building department, since the neighborhood is unincorporated. That matters: plumbing permits and inspections are handled at the county level, and the county’s product approval process is strict enough that specifying a shower valve or drain without a valid approval notice can stall a job. We assemble the permit package before demo for exactly that reason. Because these homes sit on the limestone ridge with high humidity and heavy summer downpours, we detail waterproofing and exhaust ventilation with mold pressure in mind, not just code minimum.
If the conversion is one piece of a larger project, it’s often part of a full Bathroom Remodeling in Olympia Heights, and homeowners sometimes pair a bath scope with exterior work like Metal Roofing in Olympia Heights or Tile Roofing in Olympia Heights while the house is already under permit. We cover the whole of Olympia Heights and the surrounding neighborhoods, and our Bathroom Remodeling service handles everything from a single shower to a gut renovation. Material partners on bathroom scopes include Kohler for fixtures, with GAF and CertainTeed specified when roofing is bundled in.
Serving Olympia Heights, FL – Our Local Coverage Area
We serve Olympia Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Olympia Heights
Five to eight working days for a standard alcove conversion, from demo to final inspection. Panel systems move faster and land near four to five days. Call (833) 968-1198 for a schedule estimate after we see the space.
Yes, in almost every case. Converting a tub to a shower changes the drain and valve, which is plumbing work requiring a county permit and inspection in unincorporated Miami-Dade. We pull the permit and schedule the inspection as part of the job.
Usually yes, if the existing drain is already centered or close to it and the valve wall stays put. That’s the lower-cost path. If the drain is offset or the valve needs replacing anyway, centering the drain adds a modest amount to the job. Call (833) 968-1198 and we’ll tell you which case you’re in.
$3,500 to $10,000, depending on pan type, wall material, glass, and whether framing or drain repair comes up during demo. We provide a written, itemized estimate before work begins so the number you see is the number you pay.
Every conversion is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If something isn’t done right, we make it right, and the technicians on your job are background-checked and arrive in uniform.
Get a Free Estimate for Your Olympia Heights Conversion
Call (833) 968-1198 and a live person answers, day or night. We’ll set a time to walk your bathroom, measure the alcove, check the drain and framing, and hand you a written, itemized estimate with the permit scope included. No pressure and no vague numbers. If the tub has to go, we’ll tell you exactly what the swap takes and what it costs before anything is torn out.
Written by the team at Groundwork Construction Co.