Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tile Roofing in Olympia Heights: What It Costs and How Long It Takes
Tile Roofing in Olympia Heights typically runs $8,000 to $20,000 for a full replacement on a standard single-story ranch home, and $600 to $2,500 for targeted repairs when the underlayment or a field of tiles has failed. Most full tile jobs here take five to nine working days once the permit is approved, with the county review adding two to four weeks before that.
We’re Groundwork Construction Co. of Miami, and tile is one of the most common roof types we work on in ZIP 33165. Call (833) 968-1198 and a live person answers, day or night, to set up your free estimate.
Key Takeaways
- Full tile replacement: $8,000 – $20,000 depending on square footage, tile type, and how much decking needs repair.
- Targeted tile repair: $600 – $2,500 for cracked tiles, slipped courses, or failed flashing.
- Timeline: 2 – 4 weeks for Miami-Dade permit review, then 5 – 9 working days on the roof.
- Concrete tile is the workhorse; clay and slate-look products cost more and weigh more.
- We back all tile work with the 730-Day Done Right Promise.
How We Do a Tile Roof in Olympia Heights, Step by Step
Stage 1: Inspection and written scope (day 1). We walk the roof, check the decking from the attic side where accessible, and photograph the underlayment condition. You get an upfront priced scope that separates decking repair from the tile work itself, so you’re not guessing later. This is also where we confirm whether your existing tile can be salvaged or matched.
Stage 2: Permit package and product approval (week 1 – 3). Miami-Dade requires a permit for tile re-roofing, and each tile product needs a current Notice of Acceptance on file. We assemble the package, including the wind-load calculations for your roof geometry. You decide on tile profile and color during this window, since the product approval has to match the material you pick.
Stage 3: Tear-off and decking repair (days 1 – 2 on site). Old tile comes off, and the crew inspects the decking board by board. Rotted or delaminated sheathing gets replaced and documented with photos. This is where budgets sometimes move, and we tell you before we proceed rather than after.
Stage 4: Underlayment and flashing (days 2 – 3). In this climate the underlayment is the actual waterproofing layer, so we install a high-temp self-adhered membrane at the eaves and valleys and a secondary layer across the field. New drip edge, valley metal, and pipe boots go in before a single tile is laid.
Stage 5: Tile install, ridge, and final inspection (days 3 – 9). Field tiles, hip and ridge caps, and ventilation get set. The county inspector signs off, and we do a final water test at the most vulnerable transitions before we hand you the paperwork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Tile Options You’ll Choose Between in Olympia Heights
Tile is not one product. Here’s what the choice actually looks like:
- Concrete barrel or S-tile: The most common choice on Olympia Heights ranch homes. Heavy (roughly 9 – 11 lbs per square foot installed), durable for 30-plus years, and priced in the middle of the range. Good UV performance and a wide color palette.
- Clay tile: Better color retention than concrete over the long haul and a classic look, but it costs more and chips more easily. Suits homes where the original roof was clay and you’re matching it.
- Flat-profile concrete tile: A cleaner, more modern line than barrel. Same weight class, similar price, and it reads well on the low-slope sections common to 1960s Olympia Heights homes.
- Composite or synthetic tile: Lighter than real tile, so it can work where the structure won’t carry the weight. Costs about the same as clay and, honestly, doesn’t have the same lifespan track record in South Florida heat.
- Underlayment grade: This is the quiet cost driver. A standard felt layer is cheaper; a high-temp self-adhered membrane costs more up front and is the better call under intense summer sun and heavy seasonal downpours.
What Tile Roofing Costs in Olympia Heights, FL
Plan on $8,000 to $20,000 for a full tile roof replacement on a typical single-story Olympia Heights home, and $600 to $2,500 for repairs. Here’s a line-item view of what moves the number:
| Scope | Typical range |
|---|---|
| Targeted tile repair (cracked tiles, flashing, slipped courses) | $600 – $2,500 |
| Underlayment replacement under existing tile (tile re-lay) | $4,500 – $11,000 |
| Full tile roof replacement, standard ranch home | $8,000 – $20,000 |
| Decking repair (per sheet, added when rot is found) | Quoted line by line |
What pushes a job toward the high end: larger roof area, a hip-and-valley layout that slows the crew, clay instead of concrete, significant decking replacement, or a low-slope section that needs a membrane system instead of tile. What keeps it low: a simple gable roof, sound decking, and staying with a standard concrete tile.
A written estimate from us lists the tear-off, decking allowance, underlayment spec, tile product with its product approval, flashing, ridge, and disposal. What it won’t include unless we flag it: structural repairs discovered mid-job or re-decking beyond the allowance. We tell you before the number changes. Call (833) 968-1198 for a free on-site estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Heights Homes Specifically Do to This Job
The housing stock here is the story. Most of Olympia Heights is single-story concrete-block and stucco ranch homes built from the 1950s through the 1970s, many with original carports, terrazzo floors, and flat or low-slope roof sections. That matters for tile work in two ways. First, the transition between a sloped tile field and a flat-roof section is where leaks start, and it needs proper flashing and membrane detailing, not a smear of sealant. Second, when carports and porches have been converted into enclosed rooms over the decades, the rooflines get complicated, and we’ve seen plenty of these conversions in the neighborhoods off Bird Road and near the Palmetto Expressway where the tie-in was never flashed correctly to begin with.
Because this is unincorporated Miami-Dade, every re-roof goes through county permitting and the High-Velocity Hurricane Zone product approval process. Post-Andrew wind code means your tile, fasteners, and attachment method all need matching documentation, and an incomplete submittal stalls the job. We assemble that package as part of the service.
The local climate does the rest. Intense summer sun breaks down cheap underlayment fast, and the seasonal deluges find any weak point at valleys and penetrations. Tile itself holds up; it’s what’s underneath that fails first. If the wider project involves anything beyond the roof, it’s often part of a full Roofing in Olympia Heights scope, and homeowners frequently pair a re-roof with Impact Windows & Doors in Olympia Heights to bring the whole envelope up to current standards. We cover Olympia Heights and the surrounding areas, and you can see our broader Roofing work anytime.
Serving Olympia Heights, FL – Our Local Coverage Area
We serve Olympia Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tile Roofing in Olympia Heights
A full tile replacement takes five to nine working days on the roof, plus two to four weeks for Miami-Dade permit review before we start. Repair jobs are often a single visit. Call (833) 968-1198 for a timeline specific to your roof.
Yes, a full tile re-roof requires a Miami-Dade County permit, and the tile product needs an active Notice of Acceptance. Minor repairs like replacing a handful of cracked tiles typically don’t. We handle the permit package and inspections as part of the job.
Not safely in this climate. The underlayment is the real waterproofing layer, and it can’t be inspected or replaced with old tile left in place. A full tear-off is the standard here, and it’s what lets us catch decking problems early.
Most repairs run $600 to $2,500 depending on how many tiles are involved and whether flashing or underlayment needs attention. Call (833) 968-1198 for an exact quote – estimates are free.
Every tile roof we install is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. Manufacturer warranties on the tile and underlayment apply on top of that. We put the terms in writing before work begins.
Get a Free Tile Roofing Estimate in Olympia Heights
If your tile roof is past due or you’re weighing repair against replacement, start with a free on-site estimate. Call (833) 968-1198 and a live person picks up, any hour. We’ll inspect the roof, explain what we find, and hand you an upfront written price with no surprises. Financing options include 0% for 18 months, plus $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.