Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Hialeah: What It Takes and What It Costs
Asphalt driveway paving in Hialeah typically runs $3,500 – $9,000 for a full new surface, and resurfacing an existing drive usually lands between $1,800 and $4,500 depending on square footage and base condition. Most residential drives here are finished in two to three working days, with a curing window of about 24 to 48 hours before you park on fresh pavement. Call (833) 968-1198 for a free on-site estimate, and we’ll walk your drive, check the base, and put an upfront number in writing.
Our Process, Stage by Stage
Asphalt work in Hialeah is won or lost before the first load of mix shows up. We treat every drive like a small excavation project, because that’s what it is.
Stage 1: On-site assessment and base check (day 1, 45 – 60 minutes)
We measure the footprint, probe the existing base, and check how water moves off the slab toward your swale or street. In Hialeah’s older block-home neighborhoods, plenty of drives have been patched a dozen times, and the crack pattern tells us whether resurfacing will hold or the base is gone. You decide here whether we’re talking a true mill-and-resurface or a full replacement. We hand you a written, line-item estimate the same visit.
Stage 2: Permitting and scheduling (3 – 10 business days)
Work that touches the right-of-way, the swale, or a Hialeah driveway apron usually needs a permit and a final inspection. We pull the permit, handle the inspection sequence, and lock your start date. If you’re inside an HOA, we get approval on file too, so there are no surprise stop-work orders mid-job.
Stage 3: Demolition and grading (day 2, roughly 4 – 6 hours)
We break out failed asphalt, strip the topsoil or old base, and grade for positive drainage away from the house and toward the street. Correct slope matters more here than in drier markets: Hialeah’s summer downpours are short and heavy, and a drive that holds a half-inch of standing water will be potholed in two seasons. A laser level and a string line tell the truth where eyeballs don’t.
Stage 4: Base installation and compaction (day 2 – 3, 4 – 8 hours)
We lay and compact the base in lifts, typically 4 to 6 inches of crushed aggregate, thicker where a heavy truck or second vehicle will sit. Compaction is done with a plate or roller in passes, not a one-and-done. This is the stage you never see on a finished drive and the one that decides whether your surface lasts ten years or three.
Stage 5: Paving, rolling, and cleanup (day 3, 3 – 5 hours)
Hot mix asphalt arrives at placement temperature, gets screeded to grade, then compacted with a roller while it’s still workable. We cut clean edges, haul off debris, and block the drive. You’ll keep foot traffic off for about 24 hours and vehicles off for 48 to 72 hours depending on weather. At each stage, you decide on sealcoat timing, edge style, and where the expansion joints land.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Weigh Before We Start
You’ll make two or three real decisions on a Hialeah asphalt job. Here’s what each one costs you long-term.
- Resurface vs. full replacement. Resurfacing (an overlay of 1.5 to 2 inches of fresh asphalt) is fast and cheap, but only works if the base is intact and cracks haven’t migrated up. Full replacement costs more and outlasts a patchwork overlay by years. Ask for the base inspection.
- Hot mix vs. cold patch for repairs. Cold patch is fine for a temporary pothole fix before a hurricane, but it’s not a permanent surface. Anything you’ll drive on for a decade is hot mix, period.
- Sealcoat timing. Fresh asphalt should cure 6 to 12 months before its first seal. After that, sealing every 2 to 3 years in South Florida heat and sun slows oxidation and keeps that black color from fading to gray.
- Edge treatment. A clean asphalt edge against a concrete curb or a paver border holds up better than a feathered edge that crumbles into the lawn.
- Drainage additions. A channel drain or a sloped swale costs more but solves standing water that newer, flatter lots tend to collect.
What Asphalt Driveways & Resurfacing Costs in Hialeah, FL
For most Hialeah residential drives, expect the paving itself to fall in the $3,500 – $9,000 band, with resurfacing typically under $4,500. Full driveway replacement, when the base is gone, runs $5,000 – $14,000. Here’s what moves the number:
- Square footage. A single-car drive of 250 – 400 sq ft sits at the low end; a driveway built for two vehicles or a rear parking pad pushes toward the top.
- Base condition. Solid base means a straight overlay. Failed base means excavation, hauling, and new aggregate, which is the biggest line item on the job.
- Access and demolition. Tight lots, fenced side yards, and drives that need a bobcat squeezing between a block wall and a palm tree add labor hours.
- Permits and inspections. Any apron or right-of-way work brings permitting and inspection into the number, and Hialeah’s requirement is real.
- Drainage corrections. Grading, swales, and channel drains that weren’t in the original scope.
Our written estimate lists each of those lines so you can see exactly what you’re paying for. Nothing else shows up on the invoice without a signature from you first.
See the difference
Before
After
Before
After
Before
AfterWhat Hialeah Homes Do to Asphalt Work
Hialeah is a dense, largely Spanish-speaking owner-investor market where the housing stock is overwhelmingly 1950s – 1970s single-story block and stucco homes. That era of build means a lot of the drives we see were poured once, patched for decades, and are now sitting on base that’s been cooked by subtropical sun and drained poorly through our summer downpours. We work across 33014, 33013, and 33016 regularly, where Hialeah’s housing is packed tight and a lot of drives are shared, alley-loaded, or fit against a block wall with inches to spare. Alleys and small pads mean grading has to be exact, and we plan for a mix truck that may not be able to swing into the lot. Permits, inspections, and the whole job conversation happen in Spanish with many of our Hialeah clients, and we operate that way. Hurricane-season wind and flood-elevation rules shape how we grade and where we set the finished surface. When we cover Hialeah, we do it as a local job, not a drive-by from out of town.
Serving Hialeah, FL – Our Local Coverage Area
We serve Hialeah and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Asphalt Driveways & Resurfacing in Hialeah
Most Hialeah drives are paved in 2 – 3 working days from demolition to final rolling. The base work is the slow part; the asphalt goes down in a few hours. Add 3 – 10 business days up front if the job needs a permit and inspection.
Any work that touches the apron, right-of-way, or swale in Hialeah generally needs a permit and a final inspection, and we pull it for you. Pure resurfacing inside the property line sometimes skips the permit, but verify before you plan around that. We confirm the scope on the site visit so you’re not guessing.
Yes, if the base is sound and the cracks haven’t migrated. An overlay of 1.5 – 2 inches of fresh asphalt is the fastest path back to a smooth drive. If we find failed base on the probe, we’ll tell you straight and price a replacement, not a patch that fails next summer.
Sealcoat every 2 – 3 years is the right rhythm for Hialeah’s sun and rain. Fresh asphalt should cure 6 – 12 months before the first seal. Skipping it accelerates oxidation and turns the surface gray in a couple of seasons.
Every asphalt driveway we pave is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If it isn’t done right, we make it right.
Get Your Free Estimate
Call (833) 968-1198 for a free on-site estimate on Asphalt Driveways & Resurfacing in Hialeah. A real person answers around the clock, and the visit is straightforward: we walk the drive, probe the base, check drainage, and give you a written, line-item number the same day. No pressure, no surprise add-ons. Reach out to see why we’re the right crew for the job.
Written by the team at Groundwork Construction Co.