A Groundwork company - serving Miami, FL

Ameristar Driveway & Pavers in Miami, FL

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Driveway & Pavers: The Miami Owner’s Guide

We install and service Ameristar paver and driveway systems across Miami, and a full paver driveway replacement in this market typically runs $8,260 to $21,240, with most of the work completed over a few scheduled visits rather than in a single day. Concrete driveway replacement runs $5,310 to $14,160, and sealing an existing Ameristar surface runs $295 to $825. Ameristar makes interlocking concrete pavers and segmental retaining wall systems, not a mechanical “part,” so a failing Ameristar driveway in Miami usually announces itself through movement: pavers shifting out of line, joints washing out after heavy rain, efflorescence blooming across the surface, or edge pavers creeping toward the swale. Those symptoms point to a base, drainage, or joint problem rather than one broken component, which is why the fix is almost always a rebuild from the subgrade up.

professional windows & doors service in Miami, FL

Call (833) 968-1198

Key Takeaways

  • Ameristar is a paver and hardscape brand. There’s no motorized part to swap on a driveway, so “replacement” means re-laying the system on a corrected base.
  • The number one cause of failed paver driveways in Miami is water, not traffic. Flat subgrades and undersized base depth are behind most of what we tear out.
  • Installed paver driveway pricing in Miami starts around $8,260 and climbs with square footage, base depth, geotextile, and edge restraint.
  • Groundwork Construction Co. of Miami is an independent contractor and is not affiliated with Ameristar. We source compatible materials and handle the install.

Which Ameristar Models This Applies To

Ameristar builds segmental pavement under product families with specific face dimensions and thicknesses, and matching those is the whole game. Most residential driveways we see in Miami use a 60mm paver for foot and vehicle traffic; retaining wall units run thicker and lock together with a different profile. If you’re replacing individual units instead of the whole field, you need the exact face size, thickness, color line, and laying pattern from your original order, because a 60mm unit from one family won’t sit flush against a neighboring family’s 80mm product, and dye lots shift between production runs.

To identify what you have, lift a paver from a low-traffic corner or the edge course and read the stamp on the underside. That imprint is your model identifier. Measure the face and the thickness with a tape, and photograph the laying pattern before anything gets disturbed. If you’re buying more of the same, take those measurements to a masonry supplier rather than guessing from a website photo.

The OEM-versus-aftermarket call matters here. Genuine Ameristar units in your exact dye lot may be discontinued or require a minimum order that doesn’t match a small repair. A quality compatible paver from a different manufacturer can match the thickness and face module, but the color will read slightly different in Miami’s hard sunlight, so we usually isolate the patch or re-lay a full band. Our technicians have up to 12 years of experience reading these matches on site. We don’t carry stock or keep parts on a truck; materials get sourced to your job after we confirm the spec.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Driveway & Pavers Is Failing

The symptoms below are worth reading closely, because each one points to a specific root cause. What shows on the surface in Miami is rarely the real problem.

  • Pavers rocking or sinking underfoot. That’s base failure, not a bad paver. Water has reached the bedding layer and the compacted subgrade has lost its density.
  • Sand joints washing out after rain. Miami’s summer downpours strip joint sand fast when the surface isn’t pitched correctly, and once the joints open, the base starts migrating.
  • Efflorescence, the white chalky bloom. Mineral salts are migrating to the surface because moisture is trapped in the base or wicking from the soil. It’s a moisture signal, not a cosmetic nuisance.
  • Edge pavers creeping outward or dropping at the swale. The edge restraint has failed or was never anchored properly, so the field has nothing holding its outer course.
  • Widespread cracking across multiple units. Repeated load stress on an undersized base, sometimes compounded by root heave from nearby trees, which is common in older Miami neighborhoods with mature canopy.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s the honest split of what we install and what it runs in Miami. These are installed prices, materials and labor together, and the number we quote is the number you pay.

  • Paver driveway installation: $8,260 to $21,240
  • Driveway replacement: $5,900 to $16,520
  • Concrete driveway installation: $5,310 to $14,160
  • Driveway sealing: $295 to $825

What moves the range: total square footage, base depth required for Miami’s soil and rain load, geotextile fabric, edge restraint type, and whether existing material has to be hauled off. We give you a written line-item breakdown so you can see material and labor separately. Every install is covered by our 730-Day Done Right Promise, and with 0% financing for 18 months plus $1,000 off projects over $10,000, a full rebuild is easier to budget than most owners expect.

DIY or Call Us?

There are things you can safely check yourself, and things that waste your weekend and your money. Safe to do: read the stamp on a lifted paver, photograph the pattern, confirm the pitch of the surface with a level, and note where standing water lingers after a storm. Those notes help us quote accurately.

Where DIY goes wrong on an Ameristar system is the base. Homeowners routinely re-set pavers on an inch of new sand over failed subgrade, and within one Miami rainy season the surface is rocking again. A proper repair means excavating to a compacted, graded subgrade, laying and compacting the base in lifts, setting edge restraint into concrete, and re-sanding the joints. That takes plate compactors, laser levels, and a drainage plan. There’s no dangerous tension or live wiring here, but a shallow base on Florida’s water table is a guaranteed do-over. Call (833) 968-1198 and we’ll walk you through what your driveway actually needs.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 968-1198
Local Service Coverage

Request a Free Estimate in Miami

Tell us what you need - Groundwork Construction Co. of Miami responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch