Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The Miami Owner’s Guide
We install and service Boral windows and doors across Miami, and most replacement jobs land between $5,310 and $17,700 installed for standard window replacement, while full impact-rated installations run $9,440 to $29,500. If a Boral unit in your home has stopped sealing, stopped sliding, or started fogging between the panes, the fix is usually a specific part rather than the whole unit. Most of these jobs are done in a single visit once we’ve matched the part to your exact model.

Miami owners usually find the problem the same way. A door starts dragging on the sill during the wet season, a crank handle spins without moving the sash, or you notice condensation trapped inside a sealed glass unit after a storm. That’s the moment this page is built for: you know which window or door is failing, and you need the part matched correctly, priced honestly, and installed without a second trip.
Key Takeaways
- Boral windows and doors use model-specific hardware; the part has to match the series and size, not just the brand.
- Installed replacement pricing in Miami runs $5,310 – $17,700 for standard units and $9,440 – $29,500 for impact-rated windows.
- Salt air, humidity, and storm-season wind load are the three things that wear Boral hardware out fastest in South Florida.
- Groundwork Construction Co. of Miami is an independent service provider and is not affiliated with Boral.
- Every installation carries our 730-Day Done Right Promise, with upfront pricing and no surprises.
Which Boral Models This Applies To
Boral makes windows and doors across several product families, and the hardware isn’t interchangeable between them. Before we order anything, we identify your exact unit three ways: the manufacturer label etched or stamped on the glass or frame, the model and series number on the sash edge or sill, and physical measurements of the frame, sash, and hardware mounting holes. A rollers-and-track assembly for one series won’t seat in another because the track depth and roller diameter differ by fractions of an inch. That’s the compatibility gotcha that sends a lot of Miami homeowners back to the store with the wrong part.
For Boral specifically, the OEM-versus-aftermarket decision matters less than fit. High-quality aftermarket hardware made to Boral’s spec can work well for rollers, weatherstripping, and screen frames. Where we lean OEM is on multi-point locking hardware, tilt-latch mechanisms, and any impact-rated unit, because the rating depends on the hardware meeting the tested assembly. When a wrong part compromises the impact rating, the unit is no longer compliant with Miami-Dade’s wind-load requirements, and that’s a problem at resale or insurance renewal. We source through Boral’s parts channel for those components and explain the aftermarket alternatives for the simpler parts so you can choose with real information. We don’t stock parts and we don’t carry them on a truck; we order the correct part for your unit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Windows & Doors Is Failing
- Door dragging or hard to slide: Worn rollers or a failed pivot hinge lose their tolerance over time, usually accelerated by humidity swelling the track. If the sash drags on one side, the roller or hinge is the culprit, not the frame.
- Crank spins but the sash doesn’t move: The operator arm has stripped its internal gear or separated from the sash bracket. You’ll feel it turn freely with no resistance, which means the operator needs replacing.
- Condensation or fog between the panes: The seal on the insulated glass unit has failed, letting humid Miami air inside. This isn’t a hardware problem; the glass unit itself needs replacing.
- Drafts, water intrusion, or whistling wind: Weatherstripping, sweeps, or glazing gaskets have compressed or cracked. In Miami, UV exposure breaks down these seals faster than in cooler climates, often within 7 to 10 years on west-facing units.
- Latch or lock won’t engage cleanly: The multi-point lock has fallen out of alignment with the strike, or the handle set has worn. This one affects security as well as function, so it’s worth fixing promptly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for Boral-compatible window replacement in Miami runs $5,310 to $17,700, and impact-rated window installation runs $9,440 to $29,500. The range comes down to three things: whether you’re replacing a part or a whole unit, the size and number of units involved, and whether impact-rated glass is required. Single-part fixes like a roller assembly, operator, or weatherstripping sit at the low end because it’s labor and a small part. Full unit swaps with impact glass sit at the high end because the unit, the hardware, and the installation labor all factor in.
Our pricing is upfront and the number you see is the number you pay. We itemize the part and the labor so you can see what you’re buying, and every installation is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right. We’re honest about one thing: replacing hardware on a window or door is often a half-day job for one unit, but matching a discontinued Boral series can add a few days for sourcing. We tell you that upfront rather than surprise you later.
DIY or Call Us?
You can safely check a lot of this yourself. Verify the manufacturer label and model number, measure the frame and hardware, note whether the sash drags or the glass is fogged, and run your hand around the frame for drafts. That information helps us match the part on the first call. Where DIY goes wrong: removing a sealed impact-rated glass unit without proper support risks injury and voids the wind-load rating if it’s reinstalled wrong, and forcing a stuck multi-point lock can crack the frame or break the mechanism. Glass handling is the risk that matters most here, and we’d rather you let a trained technician handle anything involving the glass unit or the locking assembly.
If you’re not sure which side of the line your repair falls on, call us. We answer the phone with a live person 24 hours a day, and we’ll tell you honestly whether it’s a DIY check or a job for a technician. Call (833) 968-1198 for a free estimate.
FAQs
Boral windows and doors typically last 15 to 25 years in Miami, but hardware like rollers, weatherstripping, and seals wear out faster because of salt air, humidity, and UV exposure, often needing replacement in 7 to 12 years. The unit itself may be fine while the hardware fails first. Call (833) 968-1198 for an exact quote, and estimates are free.
Yes, in most cases a failing Boral window or door can be repaired rather than fully replaced, as long as the glass unit and frame are intact. Worn rollers, operators, latches, and weatherstripping are common repairs. When the sealed glass unit has failed or the frame is compromised, replacement is the honest answer. Call (833) 968-1198 and we’ll tell you which category your unit is in.
Most single-part replacements on a Boral window or door take under two hours per unit, so a typical Miami job is done in a single visit. If the part isn’t a stock item for a discontinued series, sourcing can add a few days. We confirm the timeline before we schedule. Call (833) 968-1198 for a free estimate.
We source your part from Boral’s parts channel after verifying your exact model with the glass label, sash stamp, and physical measurements, so we’re not guessing. For simple hardware we can also explain quality aftermarket equivalents that match Boral’s spec, and you choose. We don’t stock parts, so the correct part is ordered specifically for your unit. Call (833) 968-1198 to get started.
Yes, we install and service hardware and units across window and door brands, though Boral work is a specialty, and we also work with trusted partners including KraftMaid, Cambria, and Silestone across other trades. Let us know what you have and we’ll confirm whether it’s a fit. Call (833) 968-1198 for a free estimate.
Groundwork Construction Co. of Miami works as an independent service provider and is not affiliated with Boral. We’re here to match the right part to your unit, price it honestly, and install it correctly. Call (833) 968-1198 to schedule your free estimate. Live person, 24/7, and every installation backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.