A Groundwork company - serving Miami, FL

CGI Fence Installation in Miami, FL

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Fence Installation: The Miami Owner’s Guide

CGI fence installation in Miami typically runs $4,130 to $10,620 for a complete residential run, and we usually schedule the work within the same week your estimate is approved. Most Miami owners find us after a windstorm has knocked a section out of plumb, or after a post starts to wobble in ground that never truly dries out. CGI’s aluminum and ornamental lines are built to look good for a long time, but Miami’s salt air, sandy soil, and summer squalls treat fence hardware hard. When a section fails, it rarely fails quietly: you’ll see it in a gate that won’t latch, a leaning post, or powder coat that’s flaking near the ground line.

Construction workers preparing for a professional residential fence installation project. in Miami, FL

Call (833) 968-1198

Which CGI Models This Applies To

We install CGI fence systems across their residential lines, including the aluminum ornamental, pool-code, and privacy styles common on Miami lots. The single biggest compatibility gotcha is post size and wall thickness: CGI’s standard residential aluminum posts and their heavier commercial/pool-code posts look identical from the outside but take different brackets and caps. Order the wrong bracket and it will not seat, no matter how much you torque it. Before ordering anything, find the sticker or stamp on the original post – it usually lists the series and post gauge – or measure the post’s outside dimension and wall thickness with calipers. Matching hardware to a stamped series beats guessing every time.

The OEM-versus-aftermarket call matters here too. CGI-branded brackets and caps fit the first time, but quality aftermarket equivalents in the same gauge and finish are widely available and often cost less. The trade-off is that a substandard aftermarket bracket in a high-salt Miami environment can corrode faster than the original. We’re an independent installer and not affiliated with CGI, so we’ll tell you honestly when OEM is worth the premium and when a solid aftermarket match is the smarter buy.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Fence Installation Is Failing

Here’s what Miami owners actually call us about, and what’s usually going on underneath:

  • Leaning or wobbling posts. Sandy Miami soil plus heavy summer rain lets water pool at the post base, softening the footing. The post didn’t fail – the ground did.
  • Gate that drags or won’t latch. A sagging hinge post or a swollen, out-of-square gate frame. Left alone, it puts twisting stress on the whole run.
  • Powder coat flaking or chalking near the base. Salt air and standing splash water eat coatings from the bottom up. Once bare metal shows, corrosion moves fast in Miami’s humidity.
  • Corroded or loose brackets and fasteners. Cheap fasteners are the first thing to go in salt air. Loose brackets let panels rattle and work the post holes wider in wind.
  • Rust streaks or finish dulling on a section facing the coast. The panels closest to open salt breeze degrade first, so one side failing faster than the other is a sign of the environment, not a bad fence.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Full CGI fence installation in Miami generally lands between $4,130 and $10,620, with the final number driven by run length, post count, gate hardware, and whether existing footings can be reused or need resetting. The low end fits a shorter aluminum run with standard posts; the high end covers longer spans, pool-code posts, custom gates, and full removal of the old fence. We quote parts and labor as separate line items so you can see exactly what you’re paying for, and every install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. No-hassle upfront pricing means the number you see is the number you pay.

DIY or Call Us?

You can safely check a few things yourself: measure and photograph the post stamp, look for rust and loose fasteners, and note whether the footing is soft by probing near the base with a screwdriver. That information helps us match parts fast. Where DIY goes wrong is at the footing and alignment stage – a fence post set in Miami’s sandy, waterlogged soil needs the right depth and base to stay plumb through a rainy season, and a run that’s a quarter-inch out of line will make every gate drag. Setting posts and squaring gates is finicky, back-straining work that’s easy to get subtly wrong and expensive to redo.

If you’d rather have it done correctly the first time, call us. Our technicians have up to 12 years of experience matching CGI parts to the right model, and estimates are free. Call (833) 968-1198 to schedule yours.

FAQs

How long does a CGI fence last in Miami’s climate? A well-installed CGI aluminum fence typically lasts 15 to 20-plus years in Miami, but salt air and humidity wear the finish and footings faster than in drier climates. Coast-facing panels often show finish wear years before inland sections, so expect the hardware and coatings nearest the water to need attention first.

Can the fence be repaired instead of fully replaced? Often yes – a single leaning post or a sagging gate can usually be reset or re-hung without replacing the whole run. If the powder coat is failing across multiple panels or the footings are soft throughout, a section rebuild makes more sense than piecemeal fixes. Call (833) 968-1198 and we’ll give you a straight answer for free.

How long does the swap take? Most single-section repairs and re-hangs finish in one visit, while a full run install typically takes one to two days depending on length and how many footings need resetting. We confirm the schedule when we quote. Call (833) 968-1198 for an exact timeline and price.

How do you source the right CGI part? We identify your fence series from the post stamp or precise measurements, then source OEM CGI parts or a quality aftermarket match in the same gauge and finish. We’ll walk you through the OEM-versus-aftermarket call so you’re not paying a premium you don’t need. Estimates are free – call (833) 968-1198.

We also work with brand partners like KraftMaid, Cambria, and Silestone across our kitchen and bath work, and calls are answered by a live person 24/7. For questions about your CGI fence or to price a repair in Miami, reach out today.

Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 968-1198
Local Service Coverage

Request a Free Estimate in Miami

Tell us what you need - Groundwork Construction Co. of Miami responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch