Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Miami Owner’s Guide
CGI kitchen remodeling in Miami typically runs $16,520 – $53,100 installed, depending on cabinet layout, countertop material, and how much of the room gets touched. We handle CGI-compatible cabinet and door systems alongside KraftMaid, Cambria, and Silestone so you’re working with a contractor who knows the line, not one guessing at it. Scheduling a free estimate takes a call, not a form, and we’ll give you a firm written number before any work starts.

Most owners don’t wake up planning a remodel. They discover the problem slowly: a cabinet door that won’t close flush, a drawer box that sags under a load of pots, a soft spot near the sink base after a season of Miami humidity. One hinge gives out, and suddenly the whole run feels loose. That’s where we come in: not to sell you a full gut, but to tell you honestly what failed, what it costs to fix, and whether a partial rebuild gets you another decade out of the room.
Key Takeaways
- CGI-compatible kitchen work in Miami runs $16,520 – $53,100 installed; small kitchens land near the low end at $10,620 – $23,600.
- Humidity is the number one killer of cabinet boxes and drawer hardware in South Florida, more than wear and tear.
- We’re an independent contractor and not affiliated with CGI or any manufacturer.
- Live person answers our phone 24 hours a day, and every estimate is free and in writing.
Which CGI Models This Applies To
CGI cabinetry and door systems get referenced by series rather than by a single part number, and that trips a lot of homeowners up when they’re trying to match a replacement door or drawer front. Before you order anything, open a door and look at the inside face of the cabinet box. You’ll usually find a sticker or ink stamp with the series name, the box depth, and the door style code. Write those three things down. They’re what determines whether a door hangs correctly and whether a replacement drawer box slides into the existing glides.
Depth is where people get burned. Standard base cabinets are 24 inches deep, but CGI runs and some of their upgraded lines sit at slightly different depths depending on when the box was built. A door that’s the right width and wrong depth catches on the frame or leaves a gap at the corner. Measure the actual door, not the opening, and measure from hinge edge to strike edge. That number, to the sixteenth of an inch, is the one you give a supplier.
On the OEM-versus-aftermarket question: for hinges and drawer slides, quality aftermarket equivalents from brands like Blum or Grass are often as good or better than the original CGI hardware, and they last longer in Florida humidity. For door fronts and cabinet boxes, matching the original is usually the only way to get a clean look, because finishes and profiles change year to year. We source both, and we’ll tell you which route makes sense for your room instead of upselling you into a full replacement when new hardware solves the problem.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Kitchen Remodeling Is Failing
- Doors that won’t stay closed or won’t sit flush. The hinge plates have loosened their bite in the particleboard or the hinge itself has worn. In Miami, this happens fast because seasonal humidity swells the board and shrinks it back, loosening screws a little more every cycle.
- Drawer boxes that sag or grind when you pull them. The drawer slide has lost its bearing race, often from years of a heavy pot drawer being overloaded. Grinding means metal on metal, and it gets worse with use, not better.
- Soft spots or swelling near the sink base and dishwasher. Water finds the seams in the cabinet box and the board swells. This is the most common failure we see in Miami kitchens, because a slow drip under the sink goes unnoticed for months.
- A musty smell that doesn’t go away. That’s mold taking hold in the cabinet interior, usually in the corner base unit against an exterior wall where condensation builds. Airing it out doesn’t fix it.
- Delamination on the door front or edge banding peeling back. The laminate has lifted from the core, which means moisture got behind it. Once it starts, the door front is done and needs replacing, not gluing.
Replacement Cost & What’s Included
Installed kitchen remodeling pricing in Miami breaks down like this, and we give you these numbers line by line, in writing, before any work begins:
- Full kitchen remodel: $16,520 – $53,100
- Small kitchen remodel: $10,620 – $23,600
- Cabinet installation: $4,720 – $15,340
- Countertop installation: $2,360 – $7,670
- Backsplash installation: $945 – $2,950
- Kitchen island installation: $3,540 – $11,800
What moves the number is countertop material (Cambria quartz and Silestone sit at different price points than laminate), cabinet box quality, whether plumbing or electrical has to be moved, and how much of the room is being rebuilt versus refreshed. Our quote separates parts from labor so you can see exactly what you’re paying for and where you could trim. Every project carries the 730-Day Done Right Promise, so if something isn’t right, we come back and fix it. That’s not a sales line, it’s the warranty in writing.

See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s plenty you can check yourself, and we’d rather you did. Open every cabinet door and check the hinge screws for looseness. Pull each drawer all the way out and look for grinding or a bent slide. Run a light under the sink base and look for dark staining or swelling. Feel along the bottom edge of the cabinet box for softness. Those checks take ten minutes and tell you whether a hardware swap fixes it or something larger is going on.
Where DIY goes wrong is in the install. A door hung a sixteenth of an inch off shows up every time you walk in the kitchen. A drawer box installed out of square grinds itself apart in a season. Under-sink cabinet bases with water damage have to be cut out and rebuilt correctly, or the mold comes back. We’re not going to tell you a hinge swap is dangerous, because it isn’t, but the install and rebuild work is where the money gets wasted doing it twice. Call (833) 968-1198 and we’ll tell you straight whether it’s a hardware fix or a rebuild. The estimate is free.
FAQs
Expect 15 to 25 years from the cabinet boxes and doors, and 8 to 12 years from the hinges and drawer slides, in South Florida conditions. Miami’s humidity is the main variable: kitchens with good ventilation and no under-sink leaks hit the top of that range, and boxes against exterior walls with condensation issues fail closer to the bottom. Replacing hardware at the 8-to-10-year mark extends the whole run considerably. Call (833) 968-1198 for a free assessment of your specific kitchen.
Often yes, especially if the failure is in hardware or a single damaged door or drawer front. Hinge and slide replacements, one or two door fronts, and drawer box rebuilds are common fixes that cost a fraction of a full kitchen remodel. The cases that need replacement are water-swollen boxes, delaminated door fronts, and mold in the cabinet interior. We’ll tell you which category you’re in after looking at it. Call (833) 968-1198 to schedule a free estimate.
A hardware swap or single-door replacement is usually a couple of hours. A full cabinet run replacement in a standard Miami kitchen typically takes one to three days, and a full kitchen remodel with countertops and backsplash runs one to three weeks depending on material lead times. We schedule the work in writing so you know what to expect before we start. Call (833) 968-1198 for a timeline on your project.
We source through our network of verified brand partners, matching the series, door style, and measurements you provide, and we confirm the part fits before it’s ordered. For hinges and slides, we often recommend quality aftermarket equivalents from Blum or Grass because they outperform the originals in humidity. For door fronts, we match the original CGI series where possible. Call (833) 968-1198 for a free estimate and design consult.
Ready to Price It Out?
Call (833) 968-1198 to schedule your free estimate. Live person, 24 hours a day, and a written number before any work starts. We serve Miami and the surrounding neighborhoods, and we’re an independent contractor, not affiliated with CGI. Upfront pricing, no surprises, backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.