Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Miami Homeowners Choose CGI Construction
Groundwork Construction Co. of Miami provides independent CGI cabinet installation, refacing, and repair across South Florida, and we’re not affiliated with or authorized by CGI. What sets our CGI work apart is simple: our installers have handled these cabinets in hundreds of South Florida homes, so we know exactly where CGI lines fail in Miami’s humidity and how to install them so they don’t. From a single warped door in Kendall to a full kitchen rebuild in Little Havana, we bring the same diagnosis-first approach and back the finished work with our 730-Day Done Right Promise. Call (833) 968-1198 for a free estimate.

Why Trust Groundwork Construction Co. of Miami for Your CGI Construction?
Our technicians have up to 12 years of experience, and a good share of that time has gone into CGI cabinetry specifically. We’ve seen how the Ready-to-Assemble All-Wood line holds up in a Coral Gables kitchen with west-facing windows, how Semi-Custom boxes behave in a Brickell condo where the HVAC runs hard all summer, and where the Soft-Close hardware gives out first in a Miami Beach vacation rental that sits closed up for months.
That familiarity changes what we do on every job. We order OEM-compatible hinges, glides, and soft-close mechanisms whenever a series is still in production, which keeps your warranty intact and your door gaps consistent. When a line is out of production, we source aftermarket equivalents that match or beat the original spec rather than forcing a part that doesn’t fit. Every cabinet gets acclimated to the room before it’s hung. It’s the difference between an installation that survives a Miami summer and one that starts warping by August.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Miami
Miami’s subtropical air is brutal on cabinetry, and CGI products show it in predictable ways. Here’s what we see most often.
- Door warping and delamination on painted and thermofoil finishes. Miami homes run year-round humidity, and a thermofoil door that never gets airflow will lift at the edges and peel from the substrate. This is the single most common CGI problem we correct, and it shows up fastest on doors near a range, dishwasher, or south-facing wall.
- Drawer box separation and bottom sagging in the RTA All-Wood line. Particleboard drawer bottoms absorb moisture and lose stiffness, and the box joints pull apart under the weight of everyday dishes. By the time a drawer drags, the bottom is usually already bowing.
- Soft-Close hinges and glides failing early. Dust from coastal air and constant humidity gum up the dampers, so doors stop self-closing or slam instead. This is a wear item, not a defect, and replacement hardware fixes it cleanly.
- Frame and panel joints opening on Semi-Custom cabinets. Cabinets that get installed straight off the truck, without time to adjust to the room, will expand and contract after they’re hung. Joints open, miters separate, and the cabinet never sits flush again.
- Boxes pulling away from walls in older Miami homes. CBS block and concrete walls don’t take a screw the way wood studs do. Cabinets hung without proper anchors or blocking shift and rack, and the doors never line up right after that.
CGI Parts & Our Repair-vs-Replace Approach
Parts sourcing for CGI comes down to one question: is the series still in production? For current lines, we order OEM hardware so fit and warranty coverage stay intact. For out-of-production cabinets, we use high-quality aftermarket hinges, glides, and soft-close mechanisms that meet or exceed the original spec. We don’t keep cabinets or hardware sitting in a warehouse; every part gets ordered for your specific job, which is why we measure and confirm the model before quoting.
On repair versus replace, we’re honest about the math. If fewer than 30% of your cabinet boxes show delamination or structural failure, piecemeal repair usually makes sense and saves real money. Past that threshold, replacing the boxes is more cost-effective than chasing failures one door at a time. We’ll tell you which side of that line you’re on before you commit to anything. Call (833) 968-1198 and we’ll walk through it with you.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We identify your exact CGI series, check box construction and door finish, and test hinges and glides before recommending anything.
- 2
Acclimation. Cabinets sit in the room for 48 to 72 hours before installation so the wood adjusts to Miami’s indoor humidity.
- 3
Installation or repair. Boxes get shimmed and secured to wall studs or proper anchors, then doors and drawers are hung and aligned. On refacing jobs, doors and drawer fronts come off and go back on with new hardware.
- 4
Test. Every door and drawer gets cycled open and closed, checked for soft-close function, and re-leveled before we sign off.
- 5
Warranty. The finished work is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Miami
We work across the CGI lineup Miami homeowners actually buy and install: Ready-to-Assemble (RTA) All-Wood Cabinets, Semi-Custom Cabinetry, the All-Plywood Construction Series, and Soft-Close Door and Drawer Hardware. That covers kitchen installations, cabinet refacing, full kitchen remodeling, and quartz or granite countertop work. If you’re not sure which series you have, send us a photo of the door style and drawer box and we’ll identify it before we quote the job.
We Also Service These Brands
We’re not a single-brand shop. Alongside CGI, we work with KraftMaid and Kohler cabinetry and fixtures, and install Cambria and Silestone quartz countertops. That range matters when a CGI repair turns into a full kitchen remodel, or when a countertop swap needs to line up with cabinet hardware you’ve already picked out.
FAQs – CGI Construction Service in Miami
Yes, in most cases we can repair warped CGI doors, but the fix depends on the finish. Thermofoil and painted doors that have started delaminating can sometimes be re-adhered, but if the substrate has swelled, replacement is the better route. We’ll tell you which one makes sense before you spend a dime.
Check your original purchase or installation paperwork for the series name and date, since CGI warranty terms differ by product line. We’re not affiliated with CGI, so we can’t look up your coverage, but we can identify your series and tell you what’s likely covered versus what’s normal wear. Call (833) 968-1198 and we’ll help you sort it out.
We use OEM CGI parts whenever your series is still in production, which preserves fit and keeps your warranty intact. For discontinued lines, we use aftermarket hinges, glides, and soft-close hardware that meets or exceeds the original spec.
Most CGI cabinet installations run two to four weeks from order confirmation to install, depending on the series and whether countertops are part of the job. Cabinet boxes are ordered per job rather than pulled from stock, so lead time starts when you approve the quote. Call (833) 968-1198 for a current timeline on your specific project.
Yes. CGI cabinetry works well in bathrooms and laundry rooms, though those rooms run higher humidity than kitchens and need ventilation planned in from the start. We size hardware and anchoring to the moisture level of the room, not just the cabinet spec.
CGI cabinet work in Miami runs from a few thousand dollars for hardware and repair up to full kitchen remodel pricing, depending on scope. Here are the ranges we work with:
| Service | Typical Miami Range |
|---|---|
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Kitchen Remodel | $16,520 – $53,100 |
| Small Kitchen Remodel | $10,620 – $23,600 |
Call (833) 968-1198 for an exact quote on your Miami project. Estimates and design consults are free, and pricing is upfront with no surprises once the job starts.
Book Your CGI Service in Miami, FL
Whether you need a set of CGI doors replaced, a full kitchen installed, or countertops to finish the job, Groundwork Construction Co. of Miami is ready. Every project carries our 730-Day Done Right Promise and upfront pricing you can count on. Call (833) 968-1198 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Miami.