Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Kitchen Remodeling: The Miami Owner’s Guide
We install and repair Dvele-compatible kitchen systems for Miami homeowners, and a full Dvele-aligned kitchen remodel typically runs $16,520 to $53,100 installed, depending on footprint and finish level. Smaller Dvele kitchen refreshes land in the $10,620 to $23,600 range, and cabinet-only work runs $4,720 to $15,340. Most Miami owners discover a Dvele problem the same way: a cabinet door that won’t close flush, a drawer box that catches on the frame, a soft-close hinge that stopped being soft, or a cabinet run that’s separated from the wall after a humid summer. It usually starts as one small annoyance and grows into a set of them across the same kitchen. That pattern is the signal to get it looked at.

Which Dvele Models This Applies To
Dvele builds its kitchens around modular cabinet and millwork systems rather than one universal standard, which means the right replacement part depends on your specific model and build year. Here’s how to pin down what you have before ordering anything.
Identify the model and cabinet spec
Look inside the sink base or the top drawer of the upper cabinet run for a manufacturer label. Dvele build documentation is usually affixed there and lists the cabinet series, box depth, and door style. Write down the door style name and the box depth in inches, not just the visible door width. Those two numbers are what every parts conversation turns on.
The OEM vs. aftermarket decision
OEM Dvele parts match the original spec exactly, so there’s no fitting risk on a door or drawer front. Aftermarket equivalents work well for hinges, drawer slides, and shelf pins, and cost meaningfully less. The gotcha is tolerances: Dvele cabinet boxes run a specific depth that aftermarket full-extension slides won’t always match without shimming. On a visible door front, always go OEM. On hardware you can’t see, a quality aftermarket equivalent is a reasonable call.
Mixing brands in the same kitchen
Some Miami kitchens mix Dvele cabinets with other lines, and that’s fine as long as you track which is which. We also work with KraftMaid, Cambria, and Silestone cabinetry and surfaces, and when those sit alongside Dvele in one kitchen, the part sourcing has to be done line by line.
Groundwork Construction Co. of Miami is an independent service provider and is not affiliated with Dvele. We source Dvele-compatible parts and install them.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Kitchen Remodeling Is Failing
These are the symptoms Miami owners actually call us about, and what’s behind each one:
- Doors that won’t stay closed or drift open. Worn hinge cartridges lose their tension over time, and humidity accelerates it. In Miami, we regularly see hinge failure within a few seasons because the salt-humid air degrades the internal spring.
- Drawers that catch or grind. Drawer slides collect grit and lose their track alignment. If the box drops slightly, it’s usually a slide that’s out of its clip, not a broken drawer.
- Soft-close stopped being soft. The damping mechanism inside a soft-close hinge or slide wears out long before the hinge itself does. It’s a small part, not a whole-cabinet problem.
- Cabinet runs separating from the wall. Gaps along the wall line come from settling and from moisture pushing the boxes. Left alone, they pull the doors out of alignment.
- Swollen or bubbled cabinet floors under the sink. Miami’s humidity and the occasional slow leak attack MDF box bottoms first. This is the one symptom that often means replacing a box, not just a part.
Replacement Cost & What’s Included
Here’s what Dvele-compatible kitchen work costs installed in Miami, all-in, with parts and labor together:
| Service | Installed Range |
|---|---|
| Full Kitchen Remodel | $16,520 – $53,100 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Kitchen Island Installation | $3,540 – $11,800 |
What drives the range is simple: how many cabinets or parts are affected, whether we’re matching an OEM door front or you’re open to a close aftermarket match, and whether surface work is involved. On parts-only repairs, the range comes down to the number of hinge and slide replacements plus any re-alignment. Every job carries our 730-Day Done Right Promise: if it’s not done right, we make it right. Pricing is upfront, no surprises, so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can safely handle. Tightening a loose hinge plate, popping a drawer box back into its slide clip, and wiping grit off a track are all fair game for an owner.
Where it goes wrong is larger cabinetry work. Replacing a hinge cartridge the wrong way can wallow out the screw hole in Dvele’s box, and once that happens the door won’t hold no matter what hardware you install. Re-hanging a heavy slab or upper cabinet run without the right anchors is a real risk in Miami’s masonry walls, and a cabinet that comes off the wall takes drywall and backsplash with it. Cutting a new opening or shifting sink plumbing under a cabinet is where owners usually get over their heads. That’s when a background-checked, uniformed technician is worth calling. Call (833) 968-1198 to set up a free estimate.
FAQs
Dvele hinge cartridges and drawer slides typically give you a good run, but in Miami’s humidity we see soft-close damping go first, often inside four to six years on the most-used doors. Cabinet doors and box fronts last far longer than the hardware that hangs them. When the hardware age out, replacing the parts is much cheaper than replacing the cabinets. Call (833) 968-1198 for an exact quote; estimates are free.
Yes, and often it should be. Failing hinges and slides under warranty don’t justify a new kitchen, and door fronts can often be re-hung with new hardware. A wall gap or a swollen sink base is the exception, and those sometimes call for replacing the box. We recommend repairing when a repair is the honest answer. Call (833) 968-1198 and we’ll tell you straight.
Most hardware swaps – hinges, slides, shelf pins – finish in a single visit of a few hours. A single door front replacement is quick, and a full cabinet run installation is the one that spans multiple days. We’ll give you a clear timeline in the written estimate, before any work starts.
We start with your model label and the door style and box depth. From there, OEM parts come sourced to match your Dvele build, and aftermarket equivalents are only used where tolerance allows on hardware. No part gets installed on a guess. Call (833) 968-1198 for a free estimate and we’ll get the match right the first time.
Ready to Fix It Right?
Whether you’re facing one failing hinge or a full Dvele-aligned kitchen refresh, Groundwork Construction Co. of Miami is built to handle it from first call to final walkthrough. Calls are answered by a live person, 24/7 – no voicemail, no waiting until Monday. We bring background-checked, uniformed technicians, upfront pricing with no surprises, 0% financing for 18 months, and $1,000 off projects over $10,000. Call (833) 968-1198 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.