Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Olympia Heights, FL
We provide independent Dvele construction service across Olympia Heights, from panel-set assembly on rear additions to standalone ADU builds on tight 33165 lots. The one thing that makes our Dvele work here different: we plan the foundation work first, because most Olympia Heights lots sit on 1960s slabs poured over shallow footings on porous Miami limestone. A Dvele panel set delivers its loads to soil that was never engineered for them. Call (833) 968-1198 and we’ll walk your lot before anything is ordered.

We’re fluent in Dvele’s structural drawings, panel lift sequencing, and interface details. We are not authorized, affiliated, or endorsed by Dvele. As an independent Miami-Dade builder, that independence is why we can flag a foundation problem on day one instead of after the panels land.
Why Olympia Heights Residents Choose Us for Dvele Service
Modular and panelized builds go wrong at the seams, not in the middle of a panel. So that’s where we spend our time: the panel-to-foundation interface, the spline joints, the roof-to-wall transition. Our technicians have up to 12 years of experience with prefabricated systems, and they read Dvele’s shop drawings the way a framer reads a wall section.
We work on the Dvele Dvele service side as an independent contractor, which means we source OEM splines, gaskets, and factory flashings rather than cutting generic substitutes. On an Olympia Heights lot, that difference tends to show up in year two, after the first real rainy season.
Every project is covered by our 730-Day Done Right Promise. If a joint opens or a flashing fails inside that window, we make it right. Upfront pricing means the number on the estimate is the number you pay, and calls reach a live person around the clock.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Solve in Olympia Heights
- Sill-line settling on shallow 1960s footings. Dvele’s panel-to-foundation connection is only as stable as what’s under it. On Olympia Heights lots with minimal site grading, panel point loads drive settling that shows up as drywall cracks and doors that won’t latch within the first wet season.
- Moisture at spline joints opened for site modifications. Opening a factory-sealed spline to fit a lot means re-taping it. Do that with non-compatible tape in subtropical marine humidity and you’ve built a slow leak into the wall.
- UV and rain damage to prefinished panel faces during build delays. Florida sun and short, heavy downpours chalk the factory finish and stress the gaskets if a panel set sits on site too long. We stage delivery to the schedule, not the other way around.
- Roof-to-wall leaks on low-slope modular roof sections. Substituting generic sealants for the specified pre-flashed connections is the usual culprit. Miami-Dade NOA-approved membrane details exist for a reason.
- Joint creep that outruns repair. When foundation movement means the panel grid can no longer close out square, patching is throwing money at a wall that won’t hold. That’s when replacement gets honest.
Dvele Service in Olympia Heights: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes almost every Dvele build in Olympia Heights: many 1960s homes here were set on shallow footings directly on porous Miami limestone with minimal site grading. A Dvele panel set expects a foundation that will carry its point loads predictably. These lots were never designed for that. In practice, that means a geotechnical engineer and a Florida-licensed contractor re-evaluate the original slab before the first panel lands, and engineered piers often get added to bridge the gap. Buyers budgeting a panel package rarely anticipate this line item. Skipping it is how you end up with differential movement at the sill and drywall cracks by the first June. Whether the project is a Dvele Luma series modular home or an accessory dwelling unit panel package, the site work comes first.
Dvele Models & Products We Service in Olympia Heights
We work across the Dvele Nova series modular home, the Dvele Luma series modular home, Dvele custom prefabricated panel builds, and Dvele accessory dwelling unit panel packages. Each carries its own interface details, and each fails differently when site conditions get ignored.
For proprietary splines, gaskets, and factory flashings, we source OEM or Dvele-specified equivalents. We don’t keep a local parts stock, so every job gets sourced against the actual drawing set. Standard fixtures and hardware can take quality aftermarket parts; the envelope components can’t.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Olympia Heights
What you pay depends on site work, panel count, and finish level. The foundation re-evaluation and pier work is the wildcard on Olympia Heights lots. Here’s where our projects land:
| Project Type | Typical Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Roof Replacement | $8,000 – $20,000 |
| Garage Conversion | $30,000 – $80,000 |
A free estimate includes a site walk, a foundation assessment, a line-item scope, and the permit path spelled out. Call (833) 968-1198 for an exact quote.
Serving Olympia Heights, FL – Our Local Coverage Area
We serve Olympia Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Olympia Heights
Often yes, but the slab has to be evaluated first, and engineered piers are frequently required. The original slab on a 1960s Olympia Heights home was poured for a concrete-block ranch, not for the point loads a panel set delivers. We bring in a geotechnical engineer before we commit to a schedule.
It affects nearly everything, from product approvals to connection details. Even minor structural changes need a permit package built around Miami-Dade’s NOA process, and jobs stall when that package isn’t assembled by someone fluent in it. We handle that paperwork as part of the scope. Call (833) 968-1198 to talk through your project.
Home additions typically run $45,000 – $130,000 and ADUs run $90,000 – $220,000, with site work and foundation remediation driving most of the spread. Call (833) 968-1198 for a line-item estimate on your lot.
Not if they’re staged and installed correctly. Prolonged exposure during a build delay can chalk the finish and stress the gaskets, so we schedule delivery against the build sequence and protect panels on site.
No. We’re an independent Miami-Dade builder working alongside Dvele’s panelized system. We’re not authorized, affiliated, or endorsed by the manufacturer. Call (833) 968-1198 to schedule your free estimate.
Service Areas Near Olympia Heights
We serve Dvele projects across Olympia Heights service area and the surrounding communities, including Miami, Brownsville, Gladeview, Miami Springs, and West Little River, plus Fountainebleau and Coral Terrace.
Book Your Dvele Service in Olympia Heights Today
Whether you’re planning a Dvele addition, ADU, or full kitchen remodel, we’d rather assess your lot before you order a panel. Call (833) 968-1198 to schedule your free estimate. A live person answers around the clock, and we can often get out to an Olympia Heights property quickly.
Written by the team at Groundwork Construction Co. of Miami.