Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Roofing: The Miami Owner’s Guide
Roofing components matched to ECO Window Systems assemblies in Miami generally run $470 – $2,125 for a repair and $9,440 – $23,600 for a full replacement of the affected section, with most straightforward repairs scheduled within a few days of your estimate. We work as an independent contractor, not affiliated with ECO Window Systems, and we source compatible parts to fit your existing assembly rather than forcing a mismatched swap. Owners in Miami usually find us after a ceiling stain shows up weeks after a storm, or after they notice granules collecting in a gutter that hasn’t been touched in years.

Here’s the part most homeowners don’t realize: the roofing and flashing details that integrate with your window and door assemblies are often the first place wind-driven rain finds a way in, especially on the low-slope and flat sections common to Miami-Dade construction. That’s the failure pattern we see most. The water shows up inside long before it shows up on the roof.
Which ECO Window Systems Models This Applies To
ECO Window Systems builds impact-rated window and door assemblies, and the roofing details that mate to them – head flashings, sill pans, and the transition membranes where the assembly meets the roof deck – vary by series and by the rough opening the installer framed. The two things that matter most when we’re matching parts: the series designation stamped on the assembly label (usually on the jamb or the frame edge), and the actual measured rough opening, because a part spec’d to a nominal size can be off by a half inch or more on a real Miami install.
We always measure rather than trusting the label alone. Labels fade in Miami’s sun and humidity, and remodels sometimes mean the frame you have isn’t the frame that was originally spec’d. On the OEM-versus-aftermarket question: OEM parts guarantee a drop-in fit but carry the OEM lead time, and aftermarket equivalents from reputable manufacturers can match the performance spec at a lower price if the dimensions check out. We give you both options with the numbers attached. We carry no stock of parts and don’t claim parts on a truck – we source what your assembly actually needs, then install it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Roofing Is Failing
Roofing details around a window or door assembly fail in fairly predictable ways. Here are the five we see most in Miami:
- Water staining on the interior ceiling or wall near the opening. This usually means the head flashing has lifted or the sealant behind it has dried and cracked under Miami’s UV load. Water tracks along the framing before it ever shows, so the stain is often a foot or more from the actual entry point.
- Granule loss collecting in gutters or at the roof edge. Granules shedding faster than normal point to shingle aging accelerated by heat and salt air. In Miami, that granule loss can run two to three years ahead of the national average lifespan.
- Visible lifting or curling at the flashing line. Wind-driven rain during hurricane season works the flashing edges, and once a corner lifts, water gets behind it. A raised edge is a repair, not a wait-and-see.
- Soft spots or spongy feel near the assembly perimeter. Decking that’s absorbed water will feel soft underfoot, and it means the leak has been active for a while. This one moves fast – a soft spot can become a structural repair if left alone.
- Daylight visible at the transition where the roof meets the frame. Any gap, however small, is an open door to wind-driven rain. Miami’s afternoon storms push water sideways, so a gap that looks harmless in a light rain is a real problem in a squall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what the work typically runs in Miami, using our standing market ranges:
| Scope | Installed Price Range |
|---|---|
| Roof repair (flashing, localized leak, minor transition) | $470 – $2,125 |
| Roof replacement (full affected section or roof) | $9,440 – $23,600 |
| Tile roof repair (common on older Miami homes) | $710 – $2,950 |
| Metal roof installation (if a full upgrade is the right call) | $17,700 – $47,200 |
The range moves on three things: how much decking needs replacing once we open it up, the roof material already in place (tile, shingle, metal all price differently), and whether the fix is a localized flashing repair or a section replacement. We quote line-item – parts and labor broken out – so you see what the part costs and what the labor costs. Your work is covered by the 730-Day Done Right Promise, and we pull the permits Miami-Dade requires and pass inspection before we call the job done. Upfront pricing, no surprises – the number you see is the number you pay.
DIY or Call Us?
Some of this you can safely check yourself. Look for ceiling stains, run a hand along the flashing at the frame transition to feel for lifting, and look in the gutters for granule buildup. That’s inspection, not repair, and it’s smart to do after a storm.
What you shouldn’t do is climb up and reflash a transition or patch a leak around a window assembly yourself. This work happens at height on a roof, often on a slope, and a fall from roof height is a serious injury. Beyond the fall risk, a DIY patch that doesn’t integrate the flashing and membrane correctly will let water back in within one storm season, and the hidden damage behind the assembly is what turns a small repair into a large one. Let a trained professional handle the repair. If you’ve spotted any of the symptoms above, call (833) 968-1198 – our team answers live around the clock, and the estimate is free.
FAQs
Expect 12 to 18 years for standard shingle roofing in Miami’s climate, shorter where salt air and sun exposure are strongest, and 30-plus years for tile or metal. Miami’s heat, humidity, and hurricane-season wind-driven rain all shorten the usable life compared to cooler markets, which is why we inspect the transition details at every roof age milestone. Call (833) 968-1198 for a no-cost assessment of yours.
Often yes. A localized leak at a flashing transition is usually a repair in the $470 – $2,125 range, while a section with widespread granule loss or multiple failed transitions is a replacement. We inspect first and tell you which one you’re looking at with the numbers attached – no pressure toward the bigger job. Call (833) 968-1198 for an exact quote; estimates are free.
Most localized flashing and transition repairs are finished in a single visit – often the same day. A section replacement takes longer, typically a day or two depending on decking condition and material. We give you a schedule with your written quote so there are no surprises. Call (833) 968-1198 to schedule your free estimate.
We measure the actual rough opening and read the series designation on the assembly label, then source a matching part from our verified material partners – we carry no parts stock and match to your specific model rather than forcing a generic fit. You get an OEM-or-aftermarket comparison with the price difference spelled out. We also work with KraftMaid, Cambria, and Silestone on the interior side when a leak has damaged adjacent finishes. Call (833) 968-1198 for a free estimate and design consult.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.