Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Driveway & Pavers: The Miami Owner’s Guide
If you have ES Windows impact-rated units and you’re pairing them with new driveway and paver work in Miami, we install the full exterior package: ES Windows-compatible paver driveways typically run $8,260 – $21,240 installed, and a design consult and written estimate are free. Same-day repairs apply only to small things like resealing a joint or resetting a loosened paver; a full driveway install is scheduled work, usually 3 – 6 days depending on square footage and drain corrections. Most Miami owners discover a problem the same way: a paver pops loose after a hard rain, a joint sends sand and water toward the garage slab, or the driveway starts shedding water toward the house instead of the street. If your ES Windows units are new and the driveway is old, the mismatch is usually visible in the first wet season.

Which ES Windows Models This Applies To
ES Windows builds impact-rated aluminum and vinyl products across its residential lines, including single-hung, horizontal slider, casement, and fixed/picture configurations. The part number matters less than the frame profile and sill height, because exterior paver elevations are set against your door sills, thresholds, and window sill heights. If the paver surface gets raised too high against a sliding door track, water backflows into the track and winds up at the corners of the unit’s weather seal.
Here’s the compatibility gotcha we see most in Miami: ES Windows sliding glass door sills are typically set well below the finished floor line, often by 1.5 – 2 inches. A paver installer who doesn’t check that elevation will set the driveway above the sill, and the sliding door can’t shed water. The paver plane must sit at or slightly below the sill depression, with the fall pitching toward the street or a drain.
On the part side, ES Windows sill extensions, weep-hole covers, and threshold plates are produced to model-specific dimensions. OEM parts match a specific line and production window. A quality aftermarket sill extension from a Miami supplier can fit if you can match the extrusion profile and color, but the fit is a gamble if you’re guessing. We match against the series, labels, and measurements before ordering anything, and we’re upfront that we’re an independent service provider, not affiliated with ES Windows.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Driveway & Pavers Is Failing
These are the symptoms we see on the ground in Miami, in order of how often we find them:
- Pavers rocking or popping loose near the garage slab. Caused by settlement or by an underlayer that was installed too thin for Miami’s sandy fill; the base fails, the pavers move, and the joint starts migrating.
- Water pooling against the sliding door threshold. Caused by a paver plane set too high against the ES Windows sill, or by too little slope. Water sits against the door track and eventually finds the weep holes or the interior.
- Sand erosion at the joints after a storm. Caused by inadequate polymeric joint sand or incorrect installation that lets rainwater channel through the joint and lift the bedding sand.
- Efflorescence (white chalky film) on pavers. Caused by moisture moving through the blocks and salts rising to the surface; in Miami’s humidity it appears within the first year if drainage is wrong.
- Cracks running through the driveway toward the garage. Caused by a base that wasn’t compacted to spec, or by roots and drainage changes; the fix is a base rebuild, not a seal coat.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Our Miami pricing for the exterior paver work that pairs with ES Windows units:

- Paver driveway installation: $8,260 – $21,240
- Concrete driveway installation: $5,310 – $14,160
- Asphalt driveway paving: $4,130 – $10,620
- Driveway replacement (full tear-out and rebuild): $5,900 – $16,520
- Driveway sealing: $295 – $825
What drives the range is square footage, existing base condition, drainage corrections, and whether we’re matching a paver to existing stock. Every estimate is itemized: base, compaction, edge restraints, polymeric sand, and the paver. We quote it upfront, so the number you see is the number you pay. The work is backed by our 730-Day Done Right Promise, and if it isn’t done right, we make it right.
DIY or Call Us?
What you can safely handle: checking slope with a level or string, photographing the paver field and joint condition, and clearing debris from the ES Windows track and weep holes so you can see where water goes. What goes wrong on your own: base prep and compaction is the whole game with a Miami driveway, and it’s the step most homeowners skip. Hand-tamping a 6-inch compacted base over sandy fill will not hold, and the driveway will move within a season. We also don’t recommend lifting existing pavers near a sliding door threshold without knowing the sill elevation for your ES Windows unit, because you can create a backflow path that costs more to fix than the original install.
Call (833) 968-1198 to schedule a free estimate. Calls are answered by a live person 24/7, and our technicians are background-checked and arrive in uniform.
FAQs
A properly built paver driveway in Miami should last 25 – 30 years before it needs more than joint sand replacement and periodic sealing. Lifespan is almost entirely about the base and drainage; a paver on a bad base fails in 2 – 3 wet seasons. Sealing every 2 – 3 years helps in South Florida’s sun and rain. Call (833) 968-1198 for pricing on sealing or a base rebuild.
Often yes. If the base and slope are sound, we can reset lifted pavers, replace a localized section, re-sand the joints, and reseal, which usually lands in the $295 – $825 seal range plus modest labor. If pavers are rocking across more than a quarter of the field or water is flowing toward the ES Windows door sills, we recommend a base rebuild. We’ll walk the driveway with you and tell you honestly which one you’re looking at.
A full paver driveway install in Miami typically runs 3 – 6 days, including base prep, compaction, and paver laying. A repair or reseal is usually one day. We give you a schedule in writing at the estimate and hold to it, with no change-order surprises mid-job.
Pavers come from our curated brand partners, including Belgard, and ES Windows-compatible sill extensions, threshold plates, and weep-hole covers are sourced against your series, labels, and measurements. We don’t claim to stock parts locally; we order against your unit. We also service KraftMaid, Cambria, and Silestone brands across other trades. Call (833) 968-1198 to schedule your free estimate and design consult, with 0% financing for 18 months and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.