Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Home Additions & ADU: The Miami Owner’s Guide
Kohler doesn’t make a “home addition part” you swap out like a faucet cartridge. What Miami owners actually call us about is Kohler plumbing fixtures and shower systems inside a new addition, ADU or garage conversion, where a component has failed or been discontinued and needs to be matched, replaced or planned around. If you’re building, a Kohler-appointed addition in Miami runs roughly $53,100 – $153,400 depending on footprint and finishes, and a detached ADU $106,200 – $259,600. We schedule these builds rather than promise same-day anything; nobody builds an ADU in a day, and you shouldn’t trust anyone who says otherwise.

How owners usually find out something’s wrong
It’s rarely the addition itself. It’s the Kohler fixture inside it: a thermostatic shower valve that stops holding temperature, a discontinued toilet fill valve with no replacement in the local supply chain, or a showerhead sediment-clogged after years of Miami-Dade’s hard, mineral-heavy water. Sometimes it’s bigger – a bathroom rough-in that was planned around a Kohler series now sunset, discovered mid-project when the tile is already set. Our technicians have up to 12 years of experience, and the pattern is consistent: the failure shows up in the plumbing, not the walls.
Which Kohler Models This Applies To
Kohler doesn’t use a single “model” number the way a car does. Compatibility runs on series and spec. Their shower valves fall into families like the Rite-Temp pressure-balancing line and the thermostatic MasterShower line, and each family takes specific cartridges, trim and rough-in valves that don’t cross over. A thermostatic trim built for one valve body won’t seat on another, and that mismatch is the single most common ordering mistake we see. To identify what you have, pull the trim and look for the model number stamped on the valve body or the rough-in plate – not the trim ring, which often carries a different number. Photograph the label under the sink or behind the access panel too.
On the OEM-vs-aftermarket call: Kohler genuine cartridges and valves cost more, but for anything under pressure inside a wall, we recommend OEM. Aftermarket equivalents exist and some are decent, but the spec tolerances on Miami additions matter – a leaking valve behind a finished shower wall means tearing out tile to fix it. We carry no parts on any truck and hold no local inventory, so we source the exact part against your model number before the crew mobilizes. For kitchens and baths in these additions we also work with KraftMaid cabinetry, Cambria and Silestone counters alongside Kohler fixtures. To be clear: Groundwork Construction Co. of Miami is an independent service provider, not affiliated with Kohler.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Home Additions & ADU Is Failing
These are the symptoms we get called about most in Miami on Kohler-appointed additions:
- Shower temperature swings or a valve that won’t hold. Usually a failed pressure-balancing cartridge or a thermostatic element past its service life. Hard water accelerates the wear, especially in older Miami homes on well or high-mineral municipal supply.
- A fixture you can’t get parts for anymore. Kohler sunsets trim and valve series over time. When the cartridge is discontinued, the fix is either a compatible replacement kit or a rough-in swap, and the decision hinges on what’s behind the wall.
- Reduced flow from a showerhead or faucet. Mineral scale from Miami’s water clogs aerators and showerhead orifices first. Sometimes it’s a $20 fix, sometimes the cartridge is shot and it’s a valve job.
- Water staining or a soft spot near a rough-in. A weeping valve or supply fitting behind a finished wall. This is the one to call on quickly – in Miami’s humidity, moisture behind drywall turns into mold fast.
- Planning-stage conflict on a new addition. The specified Kohler fixture is out of production or the rough-in doesn’t match the chosen trim. Catching it at plan review saves a tear-out; catching it after tile means a change order.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Cost depends on whether we’re replacing a fixture or building the room around one. Our line-item ranges, installed, no surprises:
| Scope | Installed range |
|---|---|
| Bathroom remodel (Kohler fixtures specified) | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Shower replacement | $3,540 – $10,030 |
| Home addition (full scope) | $53,100 – $153,400 |
| ADU construction | $106,200 – $259,600 |
| Garage conversion | $35,400 – $94,400 |
What drives the range: whether walls have to open, the Kohler series and finish level, and the rough-in condition behind existing tile. We quote parts and labor as separate lines so you see exactly what the cartridge or valve costs versus the work. Every job carries our 730-Day Done Right Promise – if it’s not done right, we make it right. Live person answers the phone 24/7.
DIY or Call Us?
You can safely shut off the supply, pull the trim ring, note the model number, and check whether an aerator or showerhead screen is simply scaled up – that’s a homeowner-friendly look. Where it goes wrong: cracking open a valve body, working a cartridge that’s seized after years in Miami water, or making a supply connection behind a finished wall. A mis-seated cartridge floods a wall cavity, and the repair cost jumps from a parts job to drywall, tile and mold remediation. Anything that requires opening a wall or touching a rough-in, call us. Reach us at (833) 968-1198, and the estimate is free – the number you see is the number you pay.
FAQs
Roughly 8 to 15 years for a pressure-balancing cartridge under normal use, and often shorter in Miami because hard water and constant humidity wear seals faster. A thermostatic element can go sooner. Call (833) 968-1198 for an exact quote on replacement – estimates are free.
Often yes. A scaled aerator or showerhead usually cleans up, and a cartridge that’s sticking can sometimes be rebuilt with a service kit rather than a full valve replacement. It depends on whether the valve body itself is sound. Call (833) 968-1198 and we’ll tell you which path makes sense before you spend.
A straight cartridge or trim replacement is typically a single visit – most jobs completed in a single visit once the correct part is in hand. If we’re replacing a rough-in valve behind finished tile, it becomes a larger scope and we schedule accordingly. Call (833) 968-1198 to get it on the calendar.
We identify your exact valve or fixture by model number, then source the correct OEM part against that number before the crew arrives – we don’t guess, and we carry no parts on any truck. If the part is discontinued, we find the compatible Kohler replacement or advise on a rough-in swap. Call (833) 968-1198 to start with a free estimate.
Planning a Kohler-appointed addition or ADU anywhere in Miami? We answer live 24/7, quote upfront with no surprises, and back the work with our 730-Day Done Right Promise. Financing is available at 0% for 18 months, and there’s $1,000 off projects over $10,000. Call Groundwork Construction Co. of Miami at (833) 968-1198 for your free estimate and design consult – from foundation to finish line.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.