Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Fence Installation: The Miami Owner’s Guide
Fence installation for a KraftMaid-equipped home in Miami typically runs $4,130 – $10,620 installed, depending on material, linear footage and gate count. We schedule a free on-site estimate within days, and most straightforward runs are completed in a single visit. The work is covered by our 730-Day Done Right Promise, and every quote is upfront pricing, no surprises.

Owners usually find us after a storm season, not before. A section of vinyl or aluminum fencing has started leaning after a wet summer, a gate has begun to sag and catch on the pavers, or a post has worked loose in ground that never fully dried out. Sometimes it’s simpler: the old fence is weathered past saving and the homeowner wants a clean replacement that matches the property line and the HOA rules. Either way, the call is about getting a real number for the whole job, not piecing together parts.
A quick note on what this page is: Groundwork Construction Co. of Miami is an independent service provider. We’re not affiliated with KraftMaid, and we don’t manufacture, stock or carry parts. KraftMaid is known for cabinetry, so when a Miami homeowner searches for “KraftMaid fence installation,” they’re almost always looking for a contractor who works with the same quality-first approach and brand partners they already trusted in their kitchen. That’s the job we do.
Which KraftMaid Models This Applies To
Here’s the compatibility reality, and it’s the part most pages skip. Fencing is field-built, not model-matched. There is no KraftMaid fence part number to look up, no series chart, no OEM replacement you order from a catalog and bolt into place. Fence panels, posts, rails and gates are specified by the installer to fit your property line, your frost-depth-equivalent post depth, and the wind-load requirements of the material you choose. The KraftMaid connection on a Miami property is almost always the cabinetry inside the house, which tells us the homeowner values a coherent material palette and doesn’t want a bargain-bin fence fighting the rest of the exterior.
So instead of a model match, we do a site measure. We map the run, confirm where the property pins sit, check gate swing clearance and the width of the driveway approach, and identify what the ground is doing underneath. If your home also has Cambria or Silestone counters, Kohler fixtures, or KraftMaid cabinetry, we take the exterior material palette into account so the fence, driveway and hardscape read as one property, not three separate projects.
If you’re trying to identify what you actually have now, look for these markers:
- Vinyl: panel width is usually printed or molded on the bottom rail; measure post spacing at grade, not at the top, where a leaning post lies.
- Aluminum: check the rail extrusion profile and the picket thickness. Mixing profiles from different manufacturers is where gates stop latching square.
- Wood: identify post size (4×4 vs 6×6) and whether the rails are face-mounted or set in routed pockets. That determines whether a repair holds or fails again in a year.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Fence Installation Is Failing
South Florida weather is hard on fencing, and the failures show up in predictable order. Here’s what we see most in Miami:
- Posts leaning after heavy rain. Usually a shallow post set in soil that stays saturated. If the post foot is above the seasonal water table, no amount of re-tamping fixes it. We set deeper and use a proper concrete collar.
- Rust bleeding from the rail brackets or gate hardware. Standard zinc-plated fasteners don’t survive salt air and humidity. We spec stainless or hot-dip galvanized hardware, which is why coastal installs land toward the top of the price range.
- A gate that drags on the driveway or pavers. The hinge post has lost its plumb. Gate sag is a post problem nine times out of ten, not a hinge problem.
- Vinyl panels that look chalky or cracked at the corners. UV degradation. Cheaper vinyl goes brittle in South Florida sun within a few years. Impact-rated, UV-stabilized panels hold up far longer, and we’ll tell you which grade we’re quoting.
- Panels bowed or popped out of the rails after a wind event. Rail engagement wasn’t deep enough for the wind exposure. We check the exposure category before we pick the panel system, not after.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Miami, fence installation for a typical residential run lands between $4,130 and $10,620 installed. Vinyl sits at the lower-middle of that band, aluminum runs a little higher, and composite or mixed-material designs push toward the top. This is the number we commit to in writing before we start, and it doesn’t move unless the scope moves with your sign-off.
What drives the range:

- Linear footage and gate count. More gates mean more hardware and more posts to set.
- Material and hardware grade. Stainless and galvanized hardware, and UV-stabilized vinyl, cost more and last longer.
- Site conditions. Tight lots, paver removal, and root-heavy runs that need a different post approach.
- Permits and HOA review. Miami has fence height and setback rules, and most HOAs require approval before install. We handle the permit pull and inspection so nothing gets flagged after the fact.
Our technicians have up to 12 years of experience, and every install is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right. We also bring $1,000 off projects over $10,000 and 0% financing for 18 months, so a full perimeter plus driveway replacement doesn’t have to happen all at once on your card.
DIY or Call Us?
There’s an honest line here, and we’d rather draw it clearly than sell past it. What you can safely do yourself: inspect the existing fence for rot or rust, measure the linear footage, photograph the property pins, check your HOA docs and the city’s fence height limit, and clear the run of furniture and planters before the estimate. That prep makes our visit fast and your number accurate.
Where DIY goes wrong: post setting. A fence post that isn’t set deep enough and anchored in the right concrete collar will heave, lean or pull in Miami soil within a season or two. Gate fabrication compounds it. A gate that isn’t plumb and square at the start will drag forever, and by the time you notice, the post is the thing that’s wrong. Combating this yourself means buying or renting the right auger, knowing how deep your soil needs, and accepting that a bad morning of work becomes a two-weekend project. That’s the point to call.
Call (833) 968-1198 for a free estimate. A live person answers 24/7, and your technicians are background-checked and arrive in uniform.
FAQs
A quality vinyl or aluminum fence with the right hardware and a properly set post should last 15 to 20 years in Miami’s climate. Cheaper materials and shallow post sets cut that substantially, sometimes to under 10 years. Salt air, humidity and UV exposure are the real enemies, so grade matters more here than in most markets.
Often yes, if the failure is isolated: one storm-damaged section, a single sagging gate, a handful of loose pickets. A failing post line or widespread UV damage usually means replacement is the cheaper long-term call. We’ll tell you which side of that line you’re on during the free estimate, and we quote repair and replacement side by side so you can compare.
A standard residential run is typically one to three days on site, depending on linear footage, gate count and whether permits are already secured. Permit timelines add lead time before we start, and we’ll give you the realistic calendar window in writing. Most jobs are completed in a single visit once work begins.
We work with verified material partners, which is the same approach we bring to KraftMaid cabinetry, Cambria and Silestone counters, and Kohler fixtures. You’ll see the brand, grade and hardware spec named in your written quote before you sign. If we can’t source the grade we quoted, we tell you and re-quote, never swap something cheaper and hope you don’t notice.
Call (833) 968-1198 to schedule your free estimate. Upfront pricing, no surprises, and a 730-Day Done Right Promise on the work. From foundation to finish line, one contractor for the whole project.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.