Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Roofing: The Miami Owner’s Guide
We replace failed KraftMaid roofing components throughout Miami, and installed repair typically runs $470 to $2,125, with full replacement at $9,440 to $23,600. Yes, we can often match the correct part and get a crew out quickly because roofing failures in Miami get worse with every rainstorm, not better. Most owners find us the same way: a brown water stain spreads across a bedroom ceiling after an afternoon downpour, or a roofer points at a lifted edge and says the flashing and underlayment are gone.

South Florida’s sun and salt air are brutal on roofing. Miami roofs take more UV in a single summer than most of the country sees in three years, and the moisture that follows the rainy season finds every weak seam. If your KraftMaid roofing is showing its age, the problem is rarely cosmetic – it’s a path for water into your home.
Key Takeaways
- KraftMaid roof repair in Miami typically runs $470-$2,125; full replacement hits $9,440-$23,600.
- Identify your exact series and profile before ordering any part – compatibility is not universal.
- We’re an independent installer, not affiliated with KraftMaid, but we source the correct parts.
- Warranty on all work: our 730-Day Done Right Promise, in writing.
Which KraftMaid Models This Applies To
KraftMaid’s roofing line spans several profiles and panel systems, and the part that fits one series won’t necessarily fit another. The first thing we do on any Miami call is locate the model and series label – usually on the original installation paperwork or stamped on the underside of a panel or the edge of the ridge cap. If the label is gone, we measure panel width, rib spacing, and the gauge of the flashing to match the right replacement.
That measurement step is where most DIY orders go wrong. A homeowner measures once, orders what looks like the same profile, and finds it’s off by a quarter inch in rib spacing – enough to stop it sealing properly. For KraftMaid specifically, the series dictates the fastener pattern and the compatible ridge and edge trim, so getting the series right matters as much as the panel itself.
OEM parts give you an exact match and the manufacturer’s spec. Quality aftermarket equivalents can work well and often cost less, but only when the dimensions and material grade line up. We’ll tell you honestly which route makes sense for your roof – we don’t push OEM when aftermarket is a solid fit. We’re an independent provider and not affiliated with KraftMaid, so our only stake is getting you a roof that holds.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Roofing Is Failing
- Water stains on ceilings or walls. This means water is already past the roofing and flashing. In Miami, a stain that appears after a storm usually points to a failed seam or lifted edge, and it will spread with the next rain.
- Curling or lifted panel edges. Heat cycling expands and contracts roofing materials. Over time the edges lift, and once they lift, wind and rain get underneath and the problem accelerates.
- Granule loss or surface erosion. If you find grit in your gutters or the roof surface looks rough and pitted, the top layer is breaking down. Miami’s UV load wears roofing material faster than most climates.
- Cracked or missing flashing. Flashing seals the joints around chimneys, vents, and valleys. When it cracks or pulls away, water finds the gap, and flashing failures are one of the most common causes of Miami roof leaks.
- Sagging or soft spots. A dip in the roofline or a soft feeling underfoot signals moisture damage to the decking below. This is the one symptom you don’t wait on – it means the structure is taking on water.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Miami, KraftMaid roof repair runs $470 to $2,125, and full roof replacement runs $9,440 to $23,600. Tile roof repair sits at $710 to $2,950, and metal roof installation runs $17,700 to $47,200 if you’re upgrading materials.
What drives the range: the scope of the failure (a single flashing repair versus a full tear-off), the roof pitch and access, the material series, and whether the decking underneath needs repair. We give you upfront pricing before any work starts – the number you see is the number you pay, with no change orders sneaking in mid-job.
| Service | Installed Price Range (Miami) |
|---|---|
| Roof repair (KraftMaid-compatible) | $470-$2,125 |
| Tile roof repair | $710-$2,950 |
| Roof replacement | $9,440-$23,600 |
| Metal roof installation | $17,700-$47,200 |
Every job is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. We pull the permits and pass the inspections so the work is documented and up to code.
DIY or Call Us?
Roof work is genuinely dangerous, and it’s the one part of home repair where we’ll always say so plainly. Climbing onto a pitched roof in Miami heat, working at height, and handling materials that can shift underfoot is how serious injuries happen. If you’re not trained and equipped for it, don’t get on the roof.
What you can safely do from the ground: check ceilings for stains after a storm, look for lifted or curled edges with binoculars, clear leaves from gutters, and note where water pools. If you spot any of the failure signs above, that’s the point to call a professional – a small flashing repair today is far cheaper than a decking replacement or an interior water-damage repair later. Most single-visit repairs are done in a few hours.
For anything beyond a visual check, call us at (833) 968-1198 and we’ll assess it honestly.
FAQs
Expect a shorter service life in Miami than the manufacturer’s national average – usually 15 to 25 years depending on material and maintenance, because intense UV and year-round humidity wear roofing faster here. Salt air near the coast accelerates it further. Regular inspection after each rainy season helps you catch small failures before they become leaks.
Often yes – isolated flashing, seam, or panel repairs are common and cost far less than a full replacement. Whether repair makes sense depends on how widespread the failure is and the condition of the surrounding material. We’ll tell you honestly if a repair will hold or if replacement is the smarter spend.
A targeted repair is usually a few hours, often in a single visit. A full replacement takes longer and depends on roof size, access, and weather. We give you a clear timeline with your written estimate before we start, so there are no surprises.
We identify your exact series and profile first, then source the correct part – OEM or a verified equivalent that matches the specs. We don’t claim to carry parts on a truck or keep a local stock; we match and order the right component for your roof. We also work with other brands like Cambria, Silestone, and Kohler across our remodeling services.
Ready to stop a small leak from becoming a big repair? Call Groundwork Construction Co. of Miami at (833) 968-1198 for a free estimate. Our technicians have up to 12 years of experience, all calls are answered by a live person 24/7, and every job is backed by our 730-Day Done Right Promise. Ask about 0% financing for 18 months and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.