Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Bathroom Remodeling: The Miami Owner’s Guide
We remodel Miami bathrooms around Moen fixtures, and a full bathroom remodel with Moen hardware installed typically runs $10,620 to $33,040 depending on size and finish level. Smaller single-fixture swaps sit at the low end; a full gut with new valve rough-in, trim, and tile lands at the top. The job starts when something fails. A Moen shower handle gets loose and won’t hold temperature. A single-handle faucet drips at the spout no matter how hard you turn. Or a cartridge that worked fine in winter suddenly fights you in May. Most Miami owners find us after a plumber quotes them a full valve replacement when a $40 cartridge was the actual problem.

Which Moen Models This Applies To
Moen builds its faucets and shower valves in a few families, and the cartridge inside each one is different. The 1225 cartridge fits the single-handle Chateau, Adler, and most of the basic lavatory line. The 1222 fits the two-handle models and older Chateau kitchen faucets. The 1200/1200B is the Posi-Temp shower valve body cartridge, common in Motionsense and exact-temp shower trim from the last fifteen years. The 1255 Duralast cartridge is what’s inside the newer single-handle bath and kitchen faucets sold since roughly 2015, and it looks completely different from a 1225 – shorter, wider, with a plastic-integrated body. Pull the handle and the trim to identify it. If you can see four flat sides and a brass stem, it’s a 1225-style. If you see a smooth cylinder with O-rings, it’s likely a Duralast.
Groundwork Construction Co. of Miami is an independent service provider, not affiliated with Moen. Parts come through Moen’s authorized distribution and licensed plumbing supply in Miami, not a parts shelf in a truck. On newer faucets still inside Moen’s limited lifetime warranty, we source the OEM cartridge directly – the replacement is free to you and we only charge labor. On older fixtures past coverage, an OEM replacement usually costs $15 to $40 more than a quality aftermarket match and lasts longer, especially in Miami’s hard water where the ceramic disc and rubber seats wear faster.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Bathroom Remodeling Is Failing
- Drip from the spout when the handle is off. The cartridge seat has worn, and water is passing the ceramic disc. In Miami, this usually shows up after two to four years because the mineral load in the municipal water etches the seal faster than in softer-water cities.
- Handle gets stiff or squeaks when you turn it. The cartridge has seized or the internal O-rings have dried out and lost their lubricant. A cartridge that suddenly fights you mid-shower is a warning sign, not a personality trait.
- Water temperature won’t hold or the handle won’t stay on hot. On Posi-Temp shower valves, this is almost always the pressure-balancing spool inside the 1200-series cartridge. The spool sticks and the valve defaults to a lukewarm mix.
- Water seeps from behind the escutcheon plate. The cartridge has failed at the body seal, and water is escaping around the valve stem instead of through the spout. Left alone on a tiled wall, this drives moisture into the substrate behind the tile.
- Rust-colored water on first turn after a trip. Corrosion on the cartridge stem or a failing diverter. Common in Miami homes with older galvanized supply lines feeding the bath, because the sediment travels to the valve body and lodges there.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Miami pricing for the work, broken out so you know what you’re paying for:
- Single cartridge replacement (one faucet or shower valve): $165 to $340 installed
- Shower valve body replacement with new Posi-Temp valve: $610 to $1,180 installed
- Full bathroom faucet replacement (parts plus install): $310 to $770
- Full bathroom remodel with new Moen fixtures and valves: $10,620 to $33,040
The range on the cartridge job depends on access – a valve behind a finished tile wall costs more than one with a removable access panel. What we don’t do is quote a swap and then come back with a change order. The number you see is the number you pay. Every install is backed by our 730-Day Done Right Promise, which covers both labor and any parts we supplied.
DIY or Call Us?
You can safely check a few things yourself: turn the water off at the supply stop and see if the drip stops, take the handle and trim off to identify the cartridge by part number, and check whether the escutcheon plate is caulked and dry. What you should not do is open the valve body yourself if you see standing water behind the trim or if the cartridge is seized and won’t come out with normal leverage. A brass cartridge frozen into a 15-year-old valve body is a real risk of cracking the body, and once that happens the job goes from $165 to $1,180. For anything beyond identification and a stop-valve check, call us at (833) 968-1198. Background-checked, uniformed technicians handle the swap; the number is answered by a live person 24/7. We also service KraftMaid, Cambria, and Silestone on the cabinetry and countertop side of the same bathroom remodel.
FAQs
How long does a Moen cartridge last in Miami? Expect two to five years on the original cartridge, less if your building has hard water or the faucet feeds a rarely-used guest bath where sediment settles upstream. Moen’s own warranty covers the part for life on most models, and we source the replacement under that warranty when it applies.
Can I repair the cartridge instead of replacing it? Sometimes – if the drip is minor and the cartridge comes out clean, a new O-ring kit at $6 to $12 can buy another year or two. In Miami we usually recommend a full replacement because the mineral load shortens repair life; a repaired seal often fails again inside twelve months. Call (833) 968-1198 for an honest read on yours.
How long does the swap take? A single cartridge swap runs 30 to 60 minutes once the water is off and the valve is accessible. A valve body replacement behind finished tile takes three to five hours including re-tiling the opening. Most jobs are completed in a single visit when the part is in hand.
How do you source the part? We order through Moen’s authorized distribution and licensed plumbing supply. We don’t stock Moen parts on a truck, and we don’t guess the model – the correct part is confirmed against the faucet label or the cartridge you pulled before we order. That is why we ask for a photo of the part number or the faucet model sticker when you call.
Ready to stop the drip and price the fix? Call Groundwork Construction Co. of Miami at (833) 968-1198 for a free estimate. Upfront pricing, a live person on the line 24/7, and a 730-Day Done Right Promise on every job – from a single Moen cartridge to a full Miami bathroom remodel.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.