Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The Miami Owner’s Guide
Mr-Glass-compatible kitchen remodeling work in Miami typically runs $16,520 to $53,100 installed, and the part-specific repairs inside that range (a failed cabinet hinge, a cracked glass cabinet door, a tired drawer glide) are the calls we field most. Owners usually find the problem the same way: a cabinet door that suddenly hangs low, a soft-close drawer that slams, a glass pane that has fogged or chipped along the edge, or a hinge that has pulled its screws clean out of the stile. Once one Mr-Glass component starts failing in a Miami kitchen, the ones installed in the same run tend to follow within the same season.

Which Mr-Glass Models This Applies To
Mr-Glass kitchen cabinetry and glass-front components show up across a wide spread of product lines, and the part inside the door matters more than the cabinetry brand on the label. The reliable way to identify what you need is to pull the failing door or drawer, photograph the hinge cup, the glide, and the mounting plate, and measure the cup bore (the standard for most Mr-Glass-style concealed hinges is 35mm, but older and imported lines deviate) along with the door overlay. That measurement is the compatibility gotcha that trips most homeowners buying online: a 35mm cup hinge will not seat in a 32mm bore, and an overlay off by 2mm leaves a visible gap across the whole run.
The OEM-versus-aftermarket decision for Mr-Glass comes down to the part. For structural pieces (door frames, glass panes, cabinet boxes), OEM-compatible spec matters because the glass thickness and edge treatment are built into the door design. For wear parts (hinges, glides, soft-close dampers, shelf pins), a quality aftermarket equivalent from a known European hardware maker will outlast the original and cost less, and we match it by spec rather than by name. We are an independent service provider and not affiliated with Mr-Glass, so we identify parts by measurement and function, not by a logo on a box.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Kitchen Remodeling Is Failing
- Doors that hang crooked or rub the frame. The hinge screws have stripped out of the cabinet stile, which happens fast in Miami humidity as the wood or composite swells and shrinks around the fastener.
- Soft-close drawers that slam. The damper cartridge inside the glide has worn out or the glide clip has cracked. It is a cheap part and a five-minute swap once you have the right one.
- Fogged, chipped, or delaminating glass panes. Sealed glass in a kitchen door can lose its edge seal over time, and salt air plus a kitchen’s daily steam cycles speed that up along the coast.
- Drawer boxes that rack or stick. The box has gone out of square or a corner joint has opened. Sometimes it is the glide, sometimes the box itself, and the two fixes are priced very differently.
- Peeling or bubbling finish on door faces. Moisture has gotten under the finish, usually near the sink or dishwasher. Once the substrate is wet, refinishing alone will not hold.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here is where the numbers actually land in Miami, installed, with parts and labor shown together so nothing hides in a line item.
- Single part swap (hinge, glide, damper): typically the low end of a backsplash-scale job, $945 – $2,950 when bundled with other work, or a small standalone service call.
- Cabinet installation (full run, Mr-Glass-compatible boxes and doors): $4,720 – $15,340.
- Countertop installation: $2,360 – $7,670.
- Backsplash installation: $945 – $2,950.
- Kitchen island installation: $3,540 – $11,800.
- Full kitchen remodel: $16,520 – $53,100.
- Small kitchen remodel: $10,620 – $23,600.
What drives the range: door count, whether the cabinet boxes are sound or need replacement, glass spec (tempered vs standard, edge-polished vs raw), and whether plumbing or electrical has to move. We price upfront, so the number you see is the number you pay, and every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Calls are answered by a live person, 24/7.
DIY or Call Us?
Some of this you can safely handle. Swapping a soft-close damper, tightening a loose hinge screw with a longer fastener, or replacing a shelf pin is genuinely a homeowner job, and we will tell you so. Where it goes wrong: glass panes. Tempered glass in a kitchen door is under edge stress, and prying a chipped pane out of a frame without the right technique cracks it or cuts you. Cabinet boxes that have gone out of square are the other trap: shimming a door to hide the problem makes it worse in six months. Cabinet work is not the high-tension-spring kind of dangerous, but glass handling and box realignment are where DIY calls turn into replace-the-whole-door calls.
If you are not sure which side of that line you are on, call (833) 968-1198 and describe it. We will tell you honestly whether it is a part swap or a bigger job, and a free estimate costs you nothing.
FAQs
Wear parts (hinges, glides, dampers) typically last 8 to 12 years in a climate-controlled kitchen, but Miami humidity and coastal salt air shorten that to roughly 6 to 10 years near the water. Glass and cabinet boxes last far longer if the edge seals hold. If your parts are in that age window and one has failed, expect the rest of the run to follow.
Often yes. A stripped hinge screw can be filled and re-driven, a drawer box can sometimes be re-squared, and a loose door can be re-hung with new hardware. Glass cannot be repaired once chipped or fogged – it has to be replaced. Call (833) 968-1198 for an exact quote, and we will tell you which path is honest.
A single hinge or glide swap is a same-visit job, usually under an hour. A full door or drawer-front run runs a half day to a full day. A full kitchen remodel is a multi-week project, and we schedule it around your household. Estimates are free, so there is no reason to guess.
We identify it by measurement and spec – hinge cup bore, overlay, glide type, glass thickness and edge treatment – then source an OEM-compatible piece or a quality aftermarket equivalent matched to those numbers. We do not claim to carry parts on a truck or stock them locally; we order to your model.
Your kitchen is the room you use most, and a failing cabinet run makes every meal feel like a chore. Groundwork Construction Co. of Miami handles Mr-Glass-compatible kitchen work from the first hinge to the final countertop, backed by our 730-Day Done Right Promise, upfront pricing with no surprises, and background-checked, uniformed technicians on every job. We also service KraftMaid, Cambria, and Silestone installations if your kitchen mixes brands. Call (833) 968-1198 to schedule your free estimate – a live person answers, 24/7.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.