Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Windows & Doors: The Miami Owner’s Guide
We install and replace Oldcastle windows and doors across Miami, with most window replacement projects running $5,310 to $17,700 and impact-rated installations running $9,440 to $29,500, depending on opening count and product line. Older Miami homes usually surface the problem the same way: a window that won’t latch after a windy week, a sliding door that jumps its track, condensation fogging the glass from the inside, or a sill that stays damp long after the rain stops. Once one Oldcastle unit in a house starts failing, the rest are usually on the same clock, because they went in during the same build or remodel.

Key Takeaways
- We service Oldcastle units as an independent contractor, not as an affiliate of the manufacturer.
- Wind-driven rain and salt air are the two forces that kill Miami windows and doors fastest.
- Glass that has fogged internally is a sealed-unit failure and can’t be cleaned back to clarity.
- We replace the full unit with a current code-compliant product backed by our 730-Day Done Right Promise.
Which Oldcastle Models This Applies To
Oldcastle built and supplied a wide spread of aluminum and vinyl window and door lines over the years, and a lot of Miami housing stock still carries them. Identification starts on the unit itself. Pull the manufacturer label off the top or side of the sash, or on sliding doors, look inside the head track and on the jamb face. The label shows a series/product code and, on anything installed after the early 2000s, a Florida product approval number. That approval number matters in Miami-Dade and Broward, where impact-rated openings are held to stricter standards and replacements need matching or better ratings than the original.
If the label is gone, measure the rough opening, not the visible glass. Record width, height, frame depth, and the number of operating panels. Then decide OEM versus aftermarket. Matching an exact discontinued Oldcastle part is often possible but sometimes slows the job by weeks, and a copied dimension rarely solves the real problem, which is a whole unit that has aged out. In most cases we recommend a current product with a fresh rating and a warranty that actually means something, not chasing a single replacement sash. We also work with KraftMaid, Cambria, and Silestone on interior projects, and the same brand-curation standard applies here.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Windows & Doors Is Failing
Oldcastle windows and doors rarely fail all at once. They fail in ways Miami homeowners learn to recognize over a few hurricane seasons.
- Fogging or condensation between the panes. The sealed glass unit has lost its seal and moisture has entered. The glass itself is fine; the atmosphere around it is gone, and no amount of wiping fixes it.
- Sticking sashes, hard-to-turn operators, or doors that drag. Humidity swelling the frame, worn rollers or hinges, and settling all contribute. Salt air accelerates corrosion on aluminum hardware and rollers, so a door that worked last summer can bind after one rainy stretch.
- Water stains, soft sills, or damp drywall under the frame. The perimeter seal or flashing has failed and rainwater is getting behind the unit. This one is worth acting on quickly, because it leads to structural rot and mold, not just a cosmetic stain.
- Wind that whistles through a closed window or door. Weatherstripping and seals have compressed or torn, and the unit no longer closes tight. That affects both comfort and your energy bill.
- Cracked glass, bent frames, or a door that won’t latch after a storm. Storm damage or impact stress has compromised the unit. A door that doesn’t latch is a security issue, not a minor adjustment.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Pricing in Miami depends on three things: the number of openings, whether you need impact-rated products, and how much frame or flashing repair the existing wall needs. Window replacement runs $5,310 to $17,700 for a typical whole-home scope, and impact window installation runs $9,440 to $29,500. Those ranges include the new product, removal and disposal of the old units, installation, sealing, and the finish work needed to close the opening cleanly.
We price the same way we work: upfront pricing with no surprises, so the number you see is the number you pay. You’ll get a written line-item quote that separates product, labor, and any repair allowance, not a single vague lump. Because we’re an independent contractor, we source current products from established manufacturers rather than sourcing Oldcastle stock ourselves. Every install we complete is covered by our 730-Day Done Right Promise, and financing is available at 0% for 18 months, with $1,000 off projects over $10,000.

DIY or Call Us?
You can safely check a few things yourself. Confirm the unit’s label and model, test whether each sash and door operates smoothly, and look for fogging, water stains, or torn weatherstripping. Run a hand along the frame on a windy day to feel for leaks. That information is genuinely useful, and it makes the estimate faster.
What we don’t recommend is replacing a full window or exterior door yourself, especially in Miami-Dade, where impact rating, product approval, and proper flashing all have to line up. A mis-installed unit leaks water behind the wall for months before you notice, and a door that isn’t set plumb and sealed right never closes properly again. Removing glass and frames on an upper floor adds real injury risk. Get a professional on it. Call (833) 968-1198 for a free estimate, and we’ll tell you honestly whether repair or replacement makes sense.
FAQs
How long do Oldcastle windows and doors last in Miami? A well-installed vinyl or aluminum unit generally holds up 20 to 30 years elsewhere, but Miami’s salt air, UV load, and wind-driven rain push the real number closer to 15 to 25 for many homes. Hard-pounded exterior doors and south- or east-facing windows often go first.
Can a fogged window or damaged unit be repaired instead of replaced? Sometimes. A single failed sealed glass unit can be replaced if the frame and hardware are healthy. Once frames are corroded or warped, or the leak is in the wall, replacing the whole unit is the more durable choice. Call (833) 968-1198 and we’ll help you decide.
How long does the swap take? A single window or door is usually a one-day job. A whole-home replacement is typically two to four days, depending on the number of openings and any rot or flashing repair we find behind the existing frame. We’ll give you a realistic schedule before we start.
How do you source the replacement part or unit? We confirm your exact model and rough opening from the unit’s label and measurements, then source a current, rated product from established manufacturers. We don’t hold Oldcastle stock or carry parts on a truck; each replacement is matched and ordered for your home, then installed and backed by our 730-Day Done Right Promise.
Windows and doors are the openings where Miami weather gets in, so getting them right the first time saves you from a much bigger repair later. Our technicians have up to 12 years of experience, and every call is answered by a live person 24/7. Call Groundwork Construction Co. of Miami at (833) 968-1198 to schedule your free estimate and design consult.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.