Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Fence Installation: The Miami Owner’s Guide
PGT fence installation in Miami typically runs $4,130 to $10,620 for a vinyl fence, and that range covers the panels, posts, gates and the labor to set them. If your PGT product has cracked, leaned, or lost a panel to wind or salt, we can install a PGT-compatible replacement and have your line secure again quickly. Groundwork Construction Co. of Miami is an independent installer, not affiliated with PGT, and we work with what your property actually needs.

Most Miami owners don’t catch the problem until the fence tells them. A post that used to stand plumb now leans an inch after a summer storm. A panel by the pool starts to look chalky and gray, then a hinge pulls loose from soft wood. Or a gate that used to swing shut on its own starts dragging because the ground has settled an eighth of an inch under the latch post. Salt air and heavy rain find every weak point in a fence, and in Miami they find it fast.
Which PGT Models This Applies To
PGT is best known for its impact windows and doors, and some of its product lines include matching fence and screen systems for Florida properties. When you’re matching a fence replacement, the series label matters. Check the original paperwork, the inside face of a post cap, or the manufacturer sticker on the gate hardware before you order anything. A PGT series that looks alike from the street can have a different rail profile or post dimension, and a panel that’s off by a quarter inch won’t seat cleanly.
Measure the post-to-post spacing on center, the panel height, and the gate opening. Those three numbers tell us which profile family your fence belongs to. On the OEM-versus-aftermarket question, we’ll be direct: for fence work, a quality aftermarket panel in the same profile often outlasts a “matching” OEM part because it’s built thicker for Florida sun. We also install KraftMaid, Cambria and Silestone products on the interior side of the house, so we can match our fence finish to the rest of your exterior palette. What we won’t do is claim we keep PGT parts in stock or carry them on a truck. We source the right panel and hardware for your specific model before install day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Fence Installation Is Failing
- Posts leaning after a storm. Wind load on a fence in Miami is high, and a post set in soil that’s saturated after heavy rain will shift. If it moves more than a half inch, the footing is the suspect.
- Chalky, gray vinyl or faded finish. UV exposure in Miami is brutal. Surface chalk is normal wear, but deep pitting or a color that’s gone milky means the material is past its usable life.
- Loose hinges or a gate that won’t latch. Hinge screws pull out of soft or rotted wood, and a gate that no longer meets the latch post is a sign the whole frame has settled.
- Cracked or bowed panels. A hairline crack spreads fast under Florida heat cycles. One cracked panel usually means the rail connection has loosened too.
- Rust streaks at the hardware. Salt air eats cheap fasteners first. Rust tracks running down a panel mean the hardware is failing even if the panel looks fine.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Miami, a full PGT-compatible fence installation runs $4,130 to $10,620 for vinyl, with aluminum fences at $4,720 to $11,800. What moves you up or down the range: linear footage, number of posts and gates, whether the old fence has to be removed and hauled, and whether the ground needs new footings. We give you a written line-item quote before any work begins. Upfront pricing, no surprises: the number you see is the number you pay.
Every installation is covered by our 730-Day Done Right Promise, and if it’s not done right, we make it right. That’s built to last, backed in writing. Call (833) 968-1198 for a free estimate and we’ll walk the line with you.
DIY or Call Us?
You can safely check a few things yourself: sight down the fence line to see if posts are plumb, try the gate to see if it latches clean, and look at the hardware for rust. What you shouldn’t tackle solo is digging new footings and setting posts. Fence posts carry real load, and a shallow footing in South Florida soil will lean within a season. The other DIY trap is pulling a panel to inspect and cracking the rail clips on the way out, which turns a small repair into a full replacement. We’d rather you call and get it right the first time. Reach us at (833) 968-1198, answered by a live person 24/7.
FAQs
A well-installed vinyl fence in Miami typically lasts 15 to 20 years, but salt air and UV exposure can shorten that to 10 to 12 years near the coast. Aluminum holds up longer and resists rust. Call (833) 968-1198 for an exact quote on your line, and estimates are free.
Often yes. A single leaning post or a loose gate can usually be reset or rehung without replacing the whole fence. If more than a few panels are cracked or the posts are set in failed footings, replacement is the better value. We’ll tell you which one your fence needs.
Most residential fence installations in Miami are finished in one to three days, depending on footage and gate count. Removal of the old fence adds time. We give you the schedule in writing before we start.
We measure your post spacing, panel height and gate opening, confirm your model series, then order the matching panel and hardware before install day. We don’t claim to stock PGT parts or carry them on a truck, so sourcing correctly up front is how we keep the schedule honest. Call (833) 968-1198 to get started.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.