Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sakrete Home Additions & ADU: The Miami Owner’s Guide
Sakrete doesn’t make a “home addition” part you can swap out. Sakrete makes the concrete mixes, mortars, and anchoring products that hold a Miami addition together, and when one of those applications fails you get cracks in a slab, a shifting block wall, or a settling footing that shows up months after the pour. Home additions in Miami typically run $53,100 – $153,400 installed, and an ADU runs $106,200 – $259,600, so a $12 bag of mix going wrong is expensive.

Owners usually spot the problem the same way: a hairline crack in a new slab that widens over a rainy season, a threshold that starts holding water, a block knee wall that pulls away from the house, or mortar joints that crumble when you press them with a screwdriver. Summer rain and salt air make all of it worse.
Which Sakrete Models This Applies To
Sakrete’s line is wide, and the part that matters is matching the right product to the right job. For an addition slab or footing, you’re looking at high-strength concrete mix (the 80 lb. bag is the common homeowner size, rated around 4,000 psi when mixed correctly). For laying block, it’s mortar mix or Type S. For anchoring a plate or a post base into cured concrete, it’s an anchoring or fast-setting product. For patching a spalled threshold, it’s a topping or repair mix.
Identification starts on the bag. Read the mix type, the yield in cubic feet, and the water ratio printed on the back; those three numbers tell you what the product can and can’t carry. A footing poured with a fence-post mix will not hold a load-bearing wall.
Here’s the OEM question owners ask us about most: Sakrete doesn’t make a proprietary “addition part” that has to come from one source. You can use Sakrete, or a comparable mix from Quikrete or a regional bagged brand, and the job performs the same if the mix type and psi match the spec. What isn’t interchangeable is the type; the brand name is. If a label says Type S mortar, that’s what the wall needs, regardless of whose bag it came in.
One local gotcha: Miami-Dade and City of Miami building departments require engineered plans and permits for additions and ADUs, and the inspector looks at the mix design and pour records. Save the bag labels and batch info. Our technicians have up to 12 years of experience reading those specs and matching product to plan.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sakrete Home Additions & ADU Is Failing
- Cracks that keep widening. Caused by too much water in the mix at pour time, which weakens the slab and lets it shrink and crack as it cures. A crack that grows over a wet season is a structural warning, not cosmetic.
- Crumbling mortar joints. Usually the wrong mortar type or a mix that wasn’t kept from drying too fast in Miami heat. If you can dig it out with a key, the wall is losing its bond.
- Block wall pulling away from the house. Often a footing that settled, or anchors that didn’t hold in the cured concrete. Look for a widening gap at the top of the wall near the roofline.
- Water pooling at the addition door. A slab poured too low or without the right slope sheds water toward the house, and in Miami’s afternoon storms that means water under the wall within a season.
- Spalling or flaking on a threshold or step. Salt air and standing water eat a weak repair mix fast. If chunks come off when you sweep, the patch product was the wrong type.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installing or redoing a Sakrete-based addition assembly in Miami falls in these ranges. The number you see is the number you pay; we quote line by line before the first bag opens.
| Work | Installed Range in Miami |
|---|---|
| Home addition (full scope) | $53,100 – $153,400 |
| ADU construction | $106,200 – $259,600 |
| Garage conversion | $35,400 – $94,400 |
| Slab, footing, or mortar repair (targeted) | Quoted per job |
What drives the range: square footage, whether the site needs fill or grade work, the mix spec the engineer calls for, and whether we’re patching a failed area or rebuilding the assembly. All work is backed by our 730-Day Done Right Promise, and we pull the permits and pass the inspections. These are planned builds, not same-day jobs; a proper addition takes weeks, not hours.
DIY or Call Us?
You can safely check the bag label, measure a crack’s width with a coin, and photograph a gap at the wall. That information helps us quote accurately. What you should not DIY is a footing, a load-bearing block wall, or a slab that ties into an existing structure. Getting the mix ratio wrong, or pouring against a wall without the right anchors, causes failures that show up after the next rainy season and cost far more to fix than to do right the first time. Structural concrete on a Miami addition is a permit and inspection job, and a mistake here is a safety issue, not a cosmetic one.
If you’re not sure whether your Sakrete mix failed or your structure did, call us at (833) 968-1198 for a free estimate. A live person answers 24/7, and the consult includes an on-site look at what actually went wrong.
FAQs
How long should a Sakrete-poured addition slab or footing last in Miami? A properly mixed, correctly cured slab or footing should last decades. The failure has almost always happened at the pour: too much water, wrong mix type, or no curing protection in the heat. In Miami’s climate, a bad pour can show cracks or spalling within a single wet season. We’re an independent contractor and not affiliated with Sakrete, so we’re honest about the product and the application. Call (833) 968-1198 for an exact quote.
Can the failing part be repaired instead of replaced? Often yes, if the damage is surface-level. A crumbling mortar joint can be repointed, and a spalled threshold can be patched with the right repair mix. Once a footing has settled or a crack runs through a load-bearing slab, though, patching hides it rather than fixing it. Call (833) 968-1198 and we’ll tell you which one you’re looking at.
How long does the swap or repair take? Surface repairs like repointing or a threshold patch usually finish in a day. Redoing a footing or slab takes longer because the mix must cure and the inspector signs off before framing. Additions and ADUs are multi-week builds from foundation to finish line. Call (833) 968-1198 for a schedule tied to your scope.
How do you source the Sakrete product for my job? We match the mix type and psi to the engineered plan and source it from supply houses at the time of the pour. We don’t carry parts on a truck and don’t stock brand-specific bags, which means your job gets the exact spec it calls for, fresh, not whatever was sitting in a warehouse. Final walkthrough, written warranty, permits pulled. Call (833) 968-1198 to schedule your free estimate.
Besides Sakrete-based work, we also handle KraftMaid, Cambria, and Silestone products across our kitchen and bathroom projects.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.