Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Bathroom Remodeling: The Miami Owner’s Guide
We install Schluter bathroom systems across Miami, from KERDI-BOARD shower walls to DITRA-HEAT floors, and a full bathroom remodel runs $10,620 – $33,040 depending on tile, layout, and whether the plumbing moves. Smaller jobs like a walk-in shower build sit lower in that range at $5,310 – $14,160. Most failed Schluter jobs show the same handful of symptoms: tile popping loose in a shower corner, a soft thud underfoot on the bathroom floor, grout cracking along the same line twice, or a musty smell that returns after every cleaning. Owners usually find the problem the same way, a tile lifts and behind it the KERDI membrane is compromised or never bonded right, and water has been getting into the substrate for months before anything looked wrong.

Which Schluter Models This Applies To
Schluter makes a specific system for nearly every surface in a bathroom, and the right replacement depends on which one failed. KERDI-BOARD is the waterproof tile backer board for shower walls and ceilings. KERDI membrane is the rolled sheet product for floors and walls over drywall or cement board. DITRA is the uncoupling mat that goes under floor tile. DITRA-HEAT adds the electric heating cable that clips into that mat. KERDI-LINE is the linear drain system, and KERDI-FIX is the adhesive and sealant used at junctions and penetrations. To identify the right component, look for the printed marking on the fleece or board edge, usually a Schluter logo and the product name in blue, and measure the thickness. KERDI-BOARD comes in 1/4-inch, 1/2-inch, 5/8-inch, 3/4-inch, 1-inch, and 1-1/2-inch. DITRA is 1/8-inch. Order a genuine Schluter part rather than an uncoupled knockoff, because an aftermarket uncoupling mat that looks identical often uses a thinner polyethylene core, and in Miami’s year-round humidity that shows up as tile shear within a couple of years.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Bathroom Remodeling Is Failing
Each of these symptoms points to a specific failure, and knowing which one you have tells us where we start.
- Hollow-sounding tile in the shower corner or at the curb. This usually means the KERDI membrane never bonded fully to the substrate, or the thinset skinned over before the membrane was pressed in. Water reaches the gypsum or cement board behind it.
- Grout cracks along a straight line every few months. A shower floor that keeps cracking in one line usually has movement beneath the KERDI, most often a missed uncoupling layer where DITRA should have gone. Repointing the grout fixes the look, not the cause.
- Soft or springy floor tile near a toilet or tub. This points to a moisture-damaged plywood subfloor under the uncoupling mat. In Miami, a slab-on-grade home or a raised wood subfloor changes how we handle it.
- Musty smell that lingers in the shower after cleaning. That’s trapped moisture behind the tile. It means the waterproofing membrane failed at a seam, drain flange, or shower valve cutout, and it’s the most common warning sign we see.
- DITRA-HEAT warmth that’s uneven or cold in patches. A broken heating cable or a failed thermostat sensor, not a tile problem. We test the cable before assuming anything else.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Schluter bathroom remodel in Miami runs $10,620 – $33,040, and a small bathroom remodel comes in lower at $5,900 – $14,160. If your work is scoped to a shower alone, walk-in shower installation is $5,310 – $14,160, a shower replacement is $3,540 – $10,030, and a tub-to-shower conversion is $4,130 – $11,800. Line items we quote separately and in writing:
- Demo and haul-out of the old tile and substrate: $900 – $2,400
- Schluter system parts (KERDI-BOARD, membrane, DITRA, drain flange, sealants): $600 – $1,800 depending on square footage
- Schluter-certified substrate prep and waterproofing labor: $1,200 – $3,200
- Tile setting and grouting: $1,400 – $4,500
- Plumbing rough-in or fixture swap, if moved: $400 – $1,900
- Linear drain or curbless conversion, if applicable: $700 – $2,300
The range moves with tile size and material (large-format porcelain and natural stone cost more in labor), whether the drain location stays put, and whether the DITRA-HEAT cable is rerouted. We put the number in writing as an upfront price, and no surprise change orders show up once work starts. Every install is covered by our 730-Day Done Right Promise.

DIY or Call Us?
You can safely pull a loose tile corner and look behind it, buy a cheap moisture meter and check the baseboard, feel for hollow tile with a tap, and photograph the printed product name on the membrane edge. What we don’t recommend is re-bonding KERDI yourself, re-grouting without fixing the membrane underneath, or trying to patch the DITRA-HEAT cable. Waterproofing a shower is a system job, and one bad seam or a missed band at the drain flange is enough to start the leak again in a Miami summer. The repairs also won’t hold. When the membrane or the uncoupling layer is broken, our team reseals it or replaces the affected section. We’re an independent service provider, not affiliated with Schluter, and we install the real Schluter parts. Call (833) 968-1198 to schedule a free estimate.
FAQs
A properly installed Schluter shower or floor system lasts 25-plus years, and the tile itself typically outlasts the waterproofing if the job was done right. The biggest variable here is humidity. Miami’s climate keeps interior moisture levels high, and a shower with even a small membrane failure can start growing mold within 6 to 12 months rather than years. We use Schluter parts because they hold up in this climate and back our 730-Day Done Right Promise on the install. Call (833) 968-1198 for a free estimate on your Miami bathroom.
Sometimes yes, sometimes no. A localized KERDI seam failure at a shower valve or a small tear at a curb can be cut back, resealed with KERDI-FIX or a new membrane patch, and tiled over. A mat that’s debonded across a whole shower floor usually has to come out and go back in. We test the affected area when we come out and quote the repair honestly. Call (833) 968-1198 to schedule a free estimate.
A shower-only replacement usually runs 4 to 6 working days; a full bathroom remodel runs 10 to 18 working days. The timeline stretches when we uncover a damaged subfloor or need to move a drain, and the waterproofing layer has to cure between steps. We don’t rush that part because the cure is what makes the system work. Call (833) 968-1198 for an estimate on your project.
We source genuine Schluter components from Schluter-certified distributors for every job, matching the exact KERDI-BOARD thickness or DITRA mat you already have. We don’t manufacture, stock, or carry Schluter parts on a truck; we order what the job needs. That means the part fits right the first time. We also deal in KraftMaid, Cambria, and Silestone for bathroom vanities and finishes so the full bathroom ties together. Call (833) 968-1198 for a free estimate and design consult.
Prove it on a job with a written line-item quote and an upfront price, and back it with our 730-Day Done Right Promise. Our technicians have up to 12 years of experience, arrive background-checked and uniformed, and a live person answers the phone 24/7. Financing is 0% for 18 months, and projects over $10,000 take $1,000 off. Call (833) 968-1198 for your free estimate.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.