Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The Miami Owner’s Guide
Schluter kitchen remodeling in Miami typically runs $16,520 – $53,100 installed, and that range covers the waterproofing, tile, trim and profile work that Schluter systems are known for. Schluter doesn’t sell one “kitchen remodel part” you can swap out; it makes a family of tile installation systems – KERDI waterproofing, DITRA uncoupling membrane, SCHIENE and RONDEC edge profiles, KERDI-BOARD panels, and the drains and seals that tie them together. When one of those fails, it usually announces itself as a loose tile edge, a hairline crack running along a countertop seam, grout that keeps turning dark no matter how often you clean it, or a soft spot in the floor near the sink. That’s the phone call we get most often.

Which Schluter Models This Applies To
Schluter product lines are organized by function, not by appliance model, so “which part fits” comes down to matching the system and the dimension. If you’re replacing a movement joint or edge profile, the number stamped or printed on the profile tells you the family (SCHIENE, RONDEC, QUADEC, JOLLY) and the size in millimeters, which corresponds to tile thickness – a 10mm profile seats a 3/8″ tile, while 12.5mm covers heavier porcelain. KERDI and DITRA are sold by roll width and coverage (DITRA-HEAT has its own mat and thermostat pairing). Read the printed spec on the box or membrane edge before ordering; measuring the old piece with a tape is how most wrong orders happen.
On the OEM-versus-aftermarket question: Schluter makes no “authorized replacement” line, so the safest match is the same Schluter family and size as the original, bought through a distributor. Aftermarket edge profiles exist and some are decent, but the waterproofing membranes have no true equivalent – matching KERDI to a generic sheet membrane is where we see callbacks. Groundwork Construction Co. of Miami is an independent service provider and is not affiliated with Schluter.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
- A loose or hollow-sounding tile edge near a counter or island. The profile underneath has lost its bond, usually because the thin-set was skimped or the substrate moved.
- A hairline crack that follows a straight seam. That’s a failed movement joint – the gap Schluter designed to absorb expansion got filled with grout instead of the correct sealant.
- Grout that darkens and stays dark. Water is getting behind the tile because the KERDI membrane wasn’t lapped or sealed correctly, common near a sink backsplash.
- A soft or spongy floor spot. Moisture has reached the substrate, often at a drain or appliance line, and the uncoupling layer is compromised.
- Mildew that returns after cleaning. In Miami’s humidity this is usually trapped moisture under the tile, not surface dirt.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what the work actually costs in Miami, using our standing ranges. These are installed prices – materials, labor and disposal – not parts alone, because Schluter work is a system, not a bolt-on.
| Scope | Installed Range (Miami) |
|---|---|
| Kitchen Remodel | $16,520 – $53,100 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Backsplash Installation | $945 – $2,950 |
| Countertop Installation | $2,360 – $7,670 |
| Cabinet Installation | $4,720 – $15,340 |
What drives the range: how much tile and membrane has to come out, whether the substrate is sound, tile size and profile count, and whether the kitchen is occupied during work. Every quote is line-itemed up front with no change orders, backed by our 730-Day Done Right Promise. We also work with KraftMaid, Cambria and Silestone when the failure means a broader reset.
DIY or Call Us?
You can safely check a few things yourself: measure the old profile, photograph the membrane edge, and confirm the grout or sealant type. Where DIY goes wrong is at the waterproofing layer – re-cutting a KERDI seam or re-setting a profile without the right thin-set and lap creates a slow leak you won’t see for months, and in Miami’s humidity that turns into mold behind the tile. The membrane and drain work is where we tell owners to stop. Call (833) 968-1198 for a free estimate; a live person answers 24/7, and our technicians have up to 12 years of experience.
FAQs
How long should a Schluter kitchen installation last? A properly installed Schluter system should hold 20 to 30 years, but in Miami’s humidity the weak point is always the membrane seal, not the tile – re-caulk movement joints every few years.
Can the failing part be repaired instead of replaced? Often yes – a single loose profile or a failed movement joint can usually be re-set without tearing out the whole kitchen, and we’ll tell you honestly if a repair is enough. Call (833) 968-1198 for a free look.
How long does the swap take? A single-profile or seal repair is usually a one-visit job; a membrane or backsplash reset takes a few days once materials are on site. Your estimate will spell out the timeline.
How do you source the Schluter part? We order the matching Schluter family and size through a distributor, so the replacement matches your existing system – we don’t guess at a substitute. Call (833) 968-1198 for an exact quote – estimates are free.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.