Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Kitchen Remodeling: The Miami Owner’s Guide
Silestone kitchen remodeling in Miami typically runs $16,520 – $53,100 installed, and the quote depends far more on layout, cabinetry and edge profile than on the slab itself. If you’re reading this because a Silestone surface or a partner component has failed, you’ll want the facts before anyone touches your kitchen. We’re Groundwork Construction Co. of Miami, and we handle the whole scope: cabinet installation runs $4,720 – $15,340, countertop installation $2,360 – $7,670, and backsplash work $945 – $2,950 when it’s ready for a straightforward swap.

The thing to understand about Silestone is that it’s an engineered quartz, not a machined appliance with a serial-numbered parts list. That changes what “replacement” means. Most failures aren’t inside the slab: they’re at the seams, the edge profiles, the undermount sink cutout, or the cabinet boxes carrying the weight. When we send a technician on a repair or remodel, we’re usually fixing the weak link that carried the slab, not matching a part number.
Which Silestone Models This Applies To
Silestone is one product family, not a series of numbered models, so there’s no OEM parts catalog to look up. The “model” that matters is the edge profile your fabricator cut, the thickness of your slab (2 cm and 3 cm are the common spec), and the mounting method under your sink. A 2 cm slab fabricated with a glued-up front edge is a different repair than a 3 cm slab with a full bullnose.
Identifying what you’ve got is worth 10 minutes. Pull a drawer and look for the fabricator’s sticker, which usually lists the color name (grouped by Silestone’s color collections) and thickness. Measure the countertop thickness at the front edge. Snap a photo of the seam locations and the undermount sink mounting clips. If the faucet or a Kohler sink needs replacing, the cutout dimensions matter more than the color.
On the OEM-versus-aftermarket question: you’re not choosing between a branded and unbranded part. You’re choosing between an original-fabricator repair (matching the existing seam and edge) and a re-fabricated section (a new cut piece set into the opening). Both work. The re-fabricated route is where an inexperienced installer usually gets caught – the seam color-matching on a quartz like Silestone is unforgiving under Miami sun, and a poor match shows within a season.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Kitchen Remodeling Is Failing
Silestone surfaces don’t wear out the way a wood floor does. They fail at the joints and the supports. Here’s what we actually see when a tech is called out:
- A visible line at the seam. The glue joint has started to open. Miami’s humidity swings push the slab and cabinet at different rates; if the fabricator didn’t set the seam with a flexible, color-matched adhesive, it telegraphs within a couple of years.
- A wobble or gap under the sink. The undermount clips have loosened or the plywood subdeck under the sink has swelled from a slow leak. This is the most common failure on Miami counters because of year-round condensation and the occasional under-sink drip.
- A chip at the edge or a corner. Impact damage from a dropped pan or a chair pulled too hard into a radius edge. Quartz chips rather than dents; a chip at an exposed edge needs a resin fill or a re-cut, not sandpaper.
- A dull or cloudy patch that won’t clean up. Usually a heat mark from a pan set on the surface or a chemical etch from an acid cleaner. Silestone is non-porous, so this is surface damage, not penetration – a polish can bring it back in many cases.
- The cabinets sagging under the counter. A quartz slab is heavy, and if the cabinet boxes or the substrate weren’t built for it, the load shows up as a bow in the countertop. This is the one that turns a countertop repair into cabinetry work.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
What you’ll pay in Miami depends on which piece is failing and how far the repair spreads. Here’s what we quote against the market:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel with Silestone surfaces | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
The range is driven by square footage of surface, number of seams, edge profile, sink and cooktop cutouts, and whether the substrate and cabinets are sound. We quote line-item, upfront, and the number holds – no change orders mid-cut. Every project is covered by our 730-Day Done Right Promise, so if a seam opens or a clip works loose in the first two years, we make it right.
DIY or Call Us?
Some of this is safe to check yourself: look for the fabricator sticker, measure slab thickness, photograph seams, and tighten the undermount sink clips if you can reach them. That’s diagnostics, and it saves time on the estimator’s visit.
What you shouldn’t attempt is moving or re-cutting a quartz surface. A 2 cm or 3 cm Silestone slab is heavy and brittle; lifting it wrong cracks it, and cutting it without the right blade and water feed is a genuine injury risk. Seam glue and edge repairs also demand color-matched resin and a controlled cure, which is why we don’t recommend it. Call us instead – we’ll tell you honestly whether it’s a repair or a replacement, and what it costs either way.
FAQs
A properly fabricated and supported Silestone counter typically gives 15 – 25 years in a Miami kitchen, with the slab itself often outlasting the cabinets beneath it. The weak points are the seams and the sink mounting, not the quartz; a good seam and a dry subdeck are what carry it past 20 years. Sustained sun exposure near a slider and repeated heat near the cooktop shorten that. Call (833) 968-1198 for an exact quote – estimates are free.
Often, yes. A single open seam, a chipped edge, or a dull heat mark can usually be repaired in place with color-matched resin, and that’s the cheaper route. A cracked slab over a sagging cabinet, or multiple failed seams in an old install, usually points to replacement. We’ll give you the repair price and the replacement price side by side. Call (833) 968-1198 to schedule the free estimate.
A single-section repair is often a one-visit job, while a full countertop replacement typically takes a day for template and a day or two for install once the slab is fabricated, with the kitchen usable again after the adhesive cures. Cabinet and backsplash work add time. We’ll put the schedule in writing with the quote. Call (833) 968-1198 – we answer live, 24/7.
We source Silestone through our established supplier relationships, matching the color collection and thickness to your existing install so the new section reads as one continuous surface. We don’t stock slabs or carry parts on a truck; each piece is ordered to the job and cut to your dimensions. We also work with KraftMaid cabinetry, Cambria surfaces, and Kohler fixtures when the scope widens. Call (833) 968-1198 – Upfront pricing, no surprises.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.