A Groundwork company - serving Miami, FL

Tamko Kitchen Remodeling in Miami, FL

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Kitchen Remodeling: The Miami Owner’s Guide

Kitchen remodeling that involves Tamko materials in Miami typically runs $16,520 to $53,100 installed, depending on kitchen size, layout changes and the scope of cabinetry and countertop work. Because Tamko is a building-products manufacturer best known for roofing, waterproofing and, through its building-products line, underlayment and moisture-barrier systems, the Tamko element of a Miami kitchen project usually shows up under the floor or behind the wall, not on the cabinet face. In our experience, Miami homeowners discover a Tamko-related failure one of two ways: a soft, spongy spot near the sink or dishwasher, or a musty smell after a rainy season that no amount of cleaning fixes. Both point to the moisture barrier or underlayment under the finished floor, and both are worth pricing before the damage spreads to the subfloor.

professional fence installation service in Miami, FL

Call (833) 968-1198

Key takeaways:

  • Installed kitchen remodeling pricing in Miami: $16,520 – $53,100; smaller kitchens run $10,620 – $23,600.
  • Tamko moisture-barrier and underlayment failures in South Florida usually trace to heat, humidity and slab moisture, not product defect.
  • We’re an independent service provider and are not affiliated with Tamko, but we source compatible materials and match them to your existing build.
  • Every kitchen project is backed by our 730-Day Done Right Promise and Upfront pricing, no surprises.

Which Tamko Models This Applies To

Tamko’s product catalog spans several categories, and the right material depends entirely on where in the kitchen assembly it sits. For floor moisture barriers and underlayments, the identifying information lives on the original packaging, the roll core, or the printed edge of the membrane itself. When a label is gone, we identify the material by measuring thickness (most residential moisture barriers run in the 6-mil to 15-mil range for sheet products), checking the surface texture, and reading the exposure rating printed along the seam. That sounds fussy until you realize that a barrier rated for a ventilated crawlspace behaves differently from one rated for direct slab contact, and Miami slabs are almost always direct contact.

For cabinetry and finish components, brands like KraftMaid, Cambria and Silestone are the ones we work with most often in Miami kitchens; those aren’t Tamko products, but they’re the names you’ll see in the same scope of work. On the Tamko side, the OEM-versus-aftermarket call comes down to this: for moisture barriers and underlayment, a comparable aftermarket product that meets or exceeds the same perm rating and thickness is usually a safe substitution, because the performance variable is the spec, not the brand logo. For anything with a proprietary profile or edge treatment, we match OEM. We don’t claim to stock Tamko parts or carry them on a truck; we source what your kitchen actually needs after we see the assembly.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Kitchen Remodeling Is Failing

Here’s what a failing Tamko moisture barrier or underlayment actually looks like in a South Florida kitchen. Each symptom points to a specific cause, and knowing which one you’re seeing changes the repair.

  • Soft or spongy floor near the sink, dishwasher or ice maker. Water has been getting past the barrier for a while and has begun breaking down the underlayment and subfloor beneath. If the floor gives underfoot, the damage is already below the surface.
  • Musty smell that returns after cleaning. That’s mold or mildew growing in the trapped moisture layer between the barrier and the slab. South Florida humidity doesn’t vent the way a northern climate does, so moisture stays put.
  • Cuping or buckling at the seams of sheet flooring or planks. The barrier has lost adhesion and water is wicking up through the seam. This shows up fastest in kitchens with a south- or west-facing window wall.
  • Dark staining or white efflorescence along the base of cabinets. Slab moisture is migrating up through the barrier where the sheet was cut short or lapped the wrong direction. Improper lap direction is the single most common installation error we correct.
  • Grout cracking or tile lifting in a kitchen floor. Movement and moisture under the tile assembly has compromised the bond. By the time tile lifts, the underlayment beneath has usually failed.

Replacement Cost & What’s Included

Installed pricing for kitchen work in Miami lives in a wide range because kitchen size and scope vary so much. These are the numbers we quote, and they’re the same numbers you’ll see on the estimate:

Kitchen work in Miami Typical installed range
Full kitchen remodel $16,520 – $53,100
Small kitchen remodel $10,620 – $23,600
Cabinet installation $4,720 – $15,340
Countertop installation $2,360 – $7,670
Backsplash installation $945 – $2,950
Kitchen island installation $3,540 – $11,800

The range is driven by square footage, whether walls move, the condition of the subfloor once we lift the existing floor, and material tier. A moisture-barrier and underlayment replacement with new finish flooring is at the low end; a full gut with new cabinets, counters and island sits at the top. Our pricing is upfront and itemized, so you see parts and labor as separate lines before work starts. Every job carries the 730-Day Done Right Promise: if it’s not done right, we make it right, and that guarantee applies to the workmanship, not just the material.

professional fence installation service in Miami, FL
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some of this you can check yourself, and we’d rather you did than guess. Pull the toe kick off a base cabinet and look for staining. Feel the floor near the dishwasher after a cycle. Shine a light along the floor seam under the window and look for lifting or efflorescence. Those are safe, no-tool inspections that tell you whether you have a moisture problem.

Where DIY goes wrong is the part that involves lifting flooring and re-setting a barrier correctly over a concrete slab. The lap direction, the seam tape, the transition at cabinet toe kicks and the curing time all matter, and a barrier installed in the wrong direction fails faster than the one you removed. There’s no high-tension danger here, no electrical, no gas. The risk is doing the work twice. If you’ve found soft floor or a musty smell, call us at (833) 968-1198 and we’ll walk you through what we’d do before you commit to anything.

FAQs

How long should a Tamko moisture barrier last under a Miami kitchen floor? A properly installed barrier should hold for the life of the flooring above it, which in a Miami kitchen is realistically 10 to 15 years before a full floor replacement is due anyway. Failures before that window almost always trace to installation issues, not the product. If yours is failing early, call (833) 968-1198 for a free estimate on the replacement.

Can the barrier be repaired instead of replaced? Sometimes. A small section with a clean seam can be cut out and patched if the surrounding material is still bonded and dry. If the failure is widespread or the subfloor is soft, a patch just delays the inevitable, and we’ll tell you which one you’re looking at. Estimates are free either way.

How long does the swap take? A barrier and underlayment replacement with new finish flooring in a typical Miami kitchen runs about three to five working days, depending on kitchen size and whether cabinets have to come out. A full remodel with new cabinetry, counters and island takes longer, and you’ll get a written timeline before we start.

How do you source the Tamko part? We identify the existing material by spec, match it to an OEM product or a quality equivalent that meets the same rating, and document what went in. We don’t claim to stock Tamko parts or carry them on a truck; we source to the job. Call (833) 968-1198 and we’ll confirm what your kitchen needs.

Ready to Price It?

If a Tamko moisture barrier or underlayment is failing in your Miami kitchen, the cost grows with every rainy season. We answer the phone with a live person, 24/7, no voicemail and no waiting until Monday. Our technicians are background-checked and arrive in uniform, and every kitchen project is backed by our 730-Day Done Right Promise alongside 0% financing for 18 months and $1,000 off projects over $10,000. Call (833) 968-1198 to schedule your free estimate and design consult for your Miami kitchen.

Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 968-1198
Local Service Coverage

Request a Free Estimate in Miami

Tell us what you need - Groundwork Construction Co. of Miami responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch