Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Bathroom Remodeling: The Miami Owner’s Guide
We install Techo-Bloc bathroom remodeling in Miami across a typical range of $10,620 to $33,040, with the exact figure set by tile format, wet-area prep, and fixture scope. A smaller bathroom often lands between $5,900 and $14,160. This is planned construction, not an emergency call, so scheduling is quoted up front rather than promised same-day.

Most Miami owners discover a failing installation the same way. They run a hand along a floor joint near the shower and feel it: a lip where the tile edge has settled. Or grout turns dark within weeks of a cleaning, no matter how often it gets scrubbed. Sometimes a single tile sounds hollow underfoot. All three point to the same underlying problem – moisture and substrate movement working under a stone or porcelain surface that Techo-Bloc manufactures for wet zones. South Florida’s humidity and the near-daily rain of summer push water into anything that isn’t sealed and sloped correctly. We’re an independent construction company, not affiliated with Techo-Bloc, and we repair and replace these installations for Miami homeowners who want the job done once.
Which Techo-Bloc Models This Applies To
Techo-Bloc’s bathroom line centers on large-format porcelain and stone-look wall and floor tile, mosaic formats for shower floors, and coordinating trim pieces. Their wet-area tiles are engineered for a low moisture absorption rate, which matters in Miami where a bathroom can sit at high humidity for months. The catch most owners miss: the recommended setting materials and grout class vary by product line. A tile that specifies an epoxy or high-performance grout in a steam-heavy wall application will fail early if a previous installer used standard cement grout. That’s a compatibility gotcha worth checking before you spend a dollar on replacement.
Identifying the right product starts with the original packaging label or the imprint on the back of a loose tile. If neither exists, measure the exact face dimensions and thickness, photograph the back stamp, and note whether the edge is rectified or pressed. Bring those to us. We match your Techo-Bloc line – and can confirm whether a genuine replacement or a spec-equivalent from a quality aftermarket line is the smarter buy for your budget. For a full bathroom, we also work with KraftMaid vanities, Cambria and Silestone tops where the scope expands past tile and waterproofing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Bathroom Remodeling Is Failing
- Hollow sounds underfoot. A tap test that rings hollow means the tile has debonded from the thinset. That’s usually a substrate or moisture problem, not a bad tile.
- Grout darkening that returns. Discoloration that comes back after cleaning signals moisture trapped behind the tile. In a Miami bathroom, that’s often poor slope at the shower pan or a failed sealant joint.
- Lipped or uneven joints. A visible step between adjacent tiles points to settling or a substrate that flexed. It worsens with every wet season.
- Cracked tiles at corners. Cracks radiating from a wall or floor corner usually mean movement at the joint. Rigid tile and a moving substrate don’t coexist.
- Efflorescence or chalky white stains. Salt deposits pushing through the surface mean water is migrating through the assembly. Left alone, it reaches framing and studs.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here are the Miami price ranges we quote for this work. Every number reflects upfront pricing – the number you see is the number you pay, with no change-order surprises once the demo starts.
| Scope | Installed Range (Miami) |
|---|---|
| Full bathroom remodel with Techo-Bloc tile | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Shower replacement | $3,540 – $10,030 |
| Bathroom vanity installation | $945 – $3,540 |
What drives the range: tile format and pattern complexity, whether the waterproofing membrane and substrate need rebuilding, fixture and trim selection, and the size of the room. Parts and labor are quoted as separate line items so you see where the money goes. Every job carries our 730-Day Done Right Promise – if it’s not done right, we make it right. Permits are pulled where Miami code requires them, and inspections are passed before we call the job complete.

DIY or Call Us?
You can safely check a few things yourself. Confirm whether the tile is hollow with a light tap, photograph the back stamp on a loose tile, and inspect the caulk lines at the shower pan and wall corners for gaps. Those checks cost nothing and help us quote accurately. Where DIY goes wrong: tearing out a shower and rebuilding waterproofing by hand. A Miami shower that looks dry can hide saturated backer board and mold behind it, and a do-it-yourself pan that’s sloped wrong will leak into the room below within a season. Setting large-format porcelain over an improperly floated substrate also fails fast. We’d rather you call and get it right. For a free estimate, call (833) 968-1198 – a live person answers, 24/7.
FAQs
How long does a Techo-Bloc bathroom tile installation last in Miami? With correct waterproofing and an appropriate grout class, a properly installed tile surface typically holds 15 to 25 years. In Miami’s humidity, the sealant joints need refreshing every few years, and that maintenance is what keeps the assembly dry.
Can the failing tile and grout be repaired instead of fully replaced? Sometimes yes, if only a few tiles have debonded and the waterproofing behind them is still intact. We test that before recommending anything. If the substrate or pan is compromised, a targeted repair just pushes the cost down the road. Call (833) 968-1198 for a free assessment.
How long does the swap take? A shower replacement or tub-to-shower conversion usually runs several days to about two weeks depending on prep and tile. A full bathroom remodel takes longer. You’ll get a written schedule with your estimate, and we confirm it before work begins.
How do you source the Techo-Bloc part? We work from your original label, tile imprint, or exact measurements to match the correct line and setting materials. Where a genuine match isn’t practical, we specify a spec-equivalent and explain the tradeoffs in writing. Call (833) 968-1198 to start with a free estimate and design consult.
Groundwork Construction Co. of Miami has been building and remodeling since 2014, and our technicians bring up to 12 years of experience to every job. We combine Techo-Bloc tile with trusted partners like KraftMaid, Cambria, and Silestone across full bathroom scopes. Background-checked, uniformed technicians handle the work, and every project is covered by the 730-Day Done Right Promise. New customers get $1,000 off projects over $10,000, 0% financing for 18 months, and a free project estimate and design consult. Call (833) 968-1198 to schedule yours – a live person answers any hour, any day.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.